Standard view Table view

CISCO-GGSN-GEO-MIB

        This MIB provide additional information for passive interface
configured for each OSPF process, independent of object creation
in the corresponding OSPF MIB.

Source file: CISCO-GGSN-GEO-MIB
Last revised: 19 Feb 2010, 00:00 UTC
Identity: cggsnGeoMIB
Base OID: 1.3.6.1.4.1.9.9.724

Imported Objects

CISCO-SMI	ciscoMgmt
IF-MIB	ifIndex
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC	RowStatus TruthValue

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-GGSN-GEO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-GGSN-GEO-MIB::cggsnGeoMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-GGSN-GEO-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-GGSN-GEO-MIB::cggsnGeoMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (11)

cggsnGeoMIB		`.1.3.6.1.4.1.9.9.724`
cggsnGeoPassiveTable		`.1.3.6.1.4.1.9.9.724.1`
cggsnGeoPassiveEntry	IF-MIBifIndexcggsnGeoProcessNumber	`.1.3.6.1.4.1.9.9.724.1.1`
cggsnGeoProcessNumber	Unsigned32	`.1.3.6.1.4.1.9.9.724.1.1.1`
cggsnGeoPassiveStdbyIfName r/w	OctetString	`.1.3.6.1.4.1.9.9.724.1.1.2`
cggsnGeoPassiveIfOnStdby r/w	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.724.1.1.3`
cggsnGeoVRFEnabled	SNMPv2-TCTruthValue	`.1.3.6.1.4.1.9.9.724.1.1.4`
cggsnGeoRowStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.724.1.1.5`
cggsnGeoConformance		`.1.3.6.1.4.1.9.9.724.2`
cggsnGeogroups		`.1.3.6.1.4.1.9.9.724.2.1`
cggsnGeoCompliances		`.1.3.6.1.4.1.9.9.724.2.2`

Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-GGSN-GEO-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- SNMP-FRAMEWORK-MIBrfcdefault fallback1 symbol
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared4 symbols
  - SNMPv2-TCrfcshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared3 symbols
- SNMPv2-TCrfcdefault fallbackshared2 symbols

Dependency-first compile order

Conformance Groups (1)

cggsnGeoPassiveGroup	cggsnGeoPassiveStdbyIfName cggsnGeoPassiveIfOnStdby cggsnGeoVRFEnabled cggsnGeoRowStatus These objects are used to provide information about passive standby interface configuration in OSPF interface	`.1.3.6.1.4.1.9.9.724.2.1.1`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.724.2.2.1

The Compilance Stament for the agent they support
CISCO-GGSN-GEO-MIB

Required groups

mandatory	cggsnGeoPassiveGroup