CISCO-FLEX-LINKS-MIB Table View

This table allows user to configure Flex Links.
          
The Flex Links feature requires interface pairs to be
setup. This table allows user to specify such 
interface pairs.
          
An interface can become part of only one such interface
pair at any given time.

cflIfConfigEntry row .1.3.6.1.4.1.9.9.471.1.1.1.1

An entry containing information about Flex Links
configuration. Each entry configures a pair of
interfaces for a Flex Links.

Only those Layer 2 interfaces which are capable of
performing Flex Links operatio…

Indexes

cflIfConfigPrimary

Column	Syntax	OID
cflIfConfigPrimary The object indicates the primary interface in this Flex Links pair.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.471.1.1.1.1.1
cflIfConfigBackUp The object indicates the back up interface in this Flex Links pair. The value of this object is changed to 0 (zero) if this interface is removed from the ifTable. The SNMP agent is responsible for updat…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.471.1.1.1.1.2
cflIfConfigStorageType The storage type for this conceptual row.	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.471.1.1.1.1.3
cflIfConfigStatus The object to manage this RowStatus entry. This object must be set to 'creatAndGo' to create an entry and set to 'destroy' to delete an entry. The other objects in this conceptual row ca…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.471.1.1.1.1.4

This table contains management information, such as
of MAC address-table Move Update(MMU), preemption
mechanism, VLAN load balancing of Flex Links pair,
of interfaces which are capable of supporting these
features.

cflIfConfigExtEntry row .1.3.6.1.4.1.9.9.471.1.1.3.1

An entry containing Flex Links management information
for a particular interface.

Indexes

cflIfConfigPrimary

Column	Syntax	OID
cflIfConfigMmuPrimaryVlan The object specifies the MAC address-table Move Update primary VLAN for the Flex Links interface pair. A value of zero indicates that no primary VLAN has been configured for MAC address-table Move Update.	Q-BRIDGE-MIBVlanIdOrNoner/w Type Constraints: range: 0..4094	.1.3.6.1.4.1.9.9.471.1.1.3.1.1
cflIfConfigPreemptionMode The object specifies the preemption mechanism for a Flex Link interface pair. off - No preemption happens from active interface to backup interface. forced - The active interface alwa…	Enumerationr/w Enumerated Values: 1 off 2 forced 3 bandwidth	.1.3.6.1.4.1.9.9.471.1.1.3.1.2
cflIfConfigPreemptionDelay The object specifies the delay time until an interface preempts another interface for a Flex Link interface pair.	secondsSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.471.1.1.3.1.3
cflIfConfigPrefer2kVlan A string of octets containing one bit per perferred VLAN of VLANs with VlanId values of 0 through 2047 for VLAN load balancing.	CISCO-TCCisco2KVlanListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.471.1.1.3.1.4
cflIfConfigPrefer4kVlan A string of octets containing one bit per perferred VLAN of VLANs with VlanId values of 2048 through 4095 for VLAN load balancing.	CISCO-TCCisco2KVlanListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.471.1.1.3.1.5

A list of interfaces which are members of Flex Links.

cflIfStatusEntry row .1.3.6.1.4.1.9.9.471.1.2.1.1

An entry, containing status information about a
Flex Links interface.

Entry is created when an interface is configured as
a member of a Flex Links. When an entry is created
in the cflIfConfigTable, entries…

Indexes

cflIfIndex

Column	Syntax	OID
cflIfIndex The index value which uniquely identifies the interface to which this entry is applicable. cflIfIndex is the same as the ifIndex of the interface associated with a Flex Links.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.471.1.2.1.1.1
cflIfStatus The status of an interface which is participating in Flex Links operation. A value of 'forwarding' indicates that, the interface is participating in Flex Links operation and is actively forwarding traffic…	Enumeration Enumerated Values: 1 forwarding 2 blocking 3 down 4 waitingToSync 5 waitingForPeerStrate 6 unknown 7 vlbAll 8 vlbConfig 9 vlbPreempt	.1.3.6.1.4.1.9.9.471.1.2.1.1.2