CISCO-FLEX-LINKS-MIB

        This MIB module is for configuration and status query
of Flex Links feature on the Cisco device.
        
Flex Links are a pair of Layer 2 interfaces, where one
interface is configured to act as a backup to the other.
The feature provides an alternative solution to the
Spanning Tree Protocol (STP), allowing users to turn
off STP and still provide basic link redundancy.
        
Flex Links are typically configured in service provider
or enterprise networks where users do not want to run
STP on the device.
    
Source file
CISCO-FLEX-LINKS-MIB
Last revised
Identity
ciscoFlexLinksMIB
Base OID
1.3.6.1.4.1.9.9.471
Imported Objects
CISCO-SMI ciscoMgmt
CISCO-TC Cisco2KVlanList
IF-MIB InterfaceIndex InterfaceIndexOrZero
Q-BRIDGE-MIB VlanIdOrNone
SNMPv2-CONF MODULE-COMPLIANCE (no object page) NOTIFICATION-GROUP (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI MODULE-IDENTITY (no object page) NOTIFICATION-TYPE (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC RowStatus StorageType TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-FLEX-LINKS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-FLEX-LINKS-MIB::ciscoFlexLinksMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-FLEX-LINKS-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-FLEX-LINKS-MIB::ciscoFlexLinksMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (26)
.1.3.6.1.4.1.9.9.471
.1.3.6.1.4.1.9.9.471.0
.1.3.6.1.4.1.9.9.471.1
.1.3.6.1.4.1.9.9.471.1.1
.1.3.6.1.4.1.9.9.471.1.1.1
.1.3.6.1.4.1.9.9.471.1.1.1.1
.1.3.6.1.4.1.9.9.471.1.1.1.1.1
.1.3.6.1.4.1.9.9.471.1.1.1.1.2
.1.3.6.1.4.1.9.9.471.1.1.1.1.3
.1.3.6.1.4.1.9.9.471.1.1.1.1.4
.1.3.6.1.4.1.9.9.471.1.1.2
.1.3.6.1.4.1.9.9.471.1.1.3
.1.3.6.1.4.1.9.9.471.1.1.3.1
.1.3.6.1.4.1.9.9.471.1.1.3.1.1
Enumeration
.1.3.6.1.4.1.9.9.471.1.1.3.1.2
.1.3.6.1.4.1.9.9.471.1.1.3.1.3
.1.3.6.1.4.1.9.9.471.1.1.3.1.4
.1.3.6.1.4.1.9.9.471.1.1.3.1.5
.1.3.6.1.4.1.9.9.471.1.2
.1.3.6.1.4.1.9.9.471.1.2.1
.1.3.6.1.4.1.9.9.471.1.2.1.1
.1.3.6.1.4.1.9.9.471.1.2.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.471.1.2.1.1.2
.1.3.6.1.4.1.9.9.471.2
.1.3.6.1.4.1.9.9.471.2.1
.1.3.6.1.4.1.9.9.471.2.2
Dependencies (19) 7 direct · 12 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Conformance Groups (7)
A collection of objects providing interface
configuration information for Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.1
A collection of objects providing interface
status information for Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.2
A collection of objects providing enabling/disabling
of the status change notifications for Flex
Links.
.1.3.6.1.4.1.9.9.471.2.2.3
A collection of notifications providing the status
change for Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.4
A collection of objects providing interface
MMU primary VLAN information of Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.5
A collection of objects providing interface
preemption information of Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.6
A collection of objects providing interface
preferred VLANs of vlan load balancing information
of Flex Links.
.1.3.6.1.4.1.9.9.471.2.2.7
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.471.2.1.1
The compliance statement for entities which implement
the CISCO-FLEX-LINKS-MIB.

This compliance is deprecated and replaced by
ciscoFlexLinksMIBCompliance2.
Required groups

OID .1.3.6.1.4.1.9.9.471.2.1.2
The compliance statement for entities which implement
the CISCO-FLEX-LINKS-MIB.
Required groups
mandatory ciscoFlexLinksIfConfigGroup
mandatory ciscoFlexLinksIfStatusGroup
mandatory ciscoFlexLinksEnableNotifGroup
mandatory ciscoFlexLinksNotifGroup
optional ciscoFlexLinksMmuPrimaryVlanGroup This group is mandatory in devices running software
which support MMU primary VLAN feature.
optional ciscoFlexLinksPreemptionGroup This group is mandatory in devices running software
which support preemption feature.
optional ciscoFlexLinksPreferVlanGroup This group is mandatory in devices running software
which support preferred VLANs of vlan load balancing
feature.
Object refinements
ObjectAccessSyntaxDescription
cflIfConfigBackUp readonly
Write access is not required.
cflIfConfigStorageType readonly
Write access is not required.
cflIfConfigStatus readonly
active(1)
Write access is not required.
Support for createAndWait and notInService is not required.
cflEnableStatusChangeNotif readonly
Write access is not required.
cflIfConfigMmuPrimaryVlan readonly
Write access is not required.
cflIfConfigPreemptionMode readonly
Write access is not required.
cflIfConfigPreemptionDelay readonly
Write access is not required.
cflIfConfigPrefer2kVlan readonly
Write access is not required.
cflIfConfigPrefer4kVlan readonly
Write access is not required.
Notifications / Traps (1)
NameOIDDescription
.1.3.6.1.4.1.9.9.471.0.1
A cflIfStatusChangeNotif is generated when the
value of cflIfStatus changes.