CISCO-FC-SPAN-MIB Table View

cspanSessionTable is a table that lets the user configure 
and monitor the SPAN sessions.
          
A SPAN session represents an association of one destination 
port with traffic redirected from different interfaces and 
VSANs (Virtual Storage Area Networks).
          
In most situations, there would be only one active session.
The flexibility to configure multiple sessions is helpful
in sharing the analyzer that is attached to the SPAN
destination port. In other words, the user can configure
multiple sessions, but only one is active.
          
However, it is possible to have multiple session active at 
a given time. The traffic on the SPAN destination port is 
the result of the combination of the active sessions.

cspanSessionEntry row .1.3.6.1.4.1.9.9.363.1.1.2.1

A SPAN session entry. Each session consists of
session number, session Administrative Status
session OperationStatus, session InactiveReason (if the
session OperationStatus is Inactive) and a rowStatus object
to add/del…

Indexes

cspanSessionIndex

Column	Syntax	OID
cspanSessionIndex An arbitrary value which identifies a session. The value of this index must be less than the value of cspanMaxSessions.	SessionIndex Type Constraints: range: 1..4095	.1.3.6.1.4.1.9.9.363.1.1.2.1.1
cspanSessionDestIfIndex The ifIndex of the destination port to be configured for the session specified by the instance of cspanSessionIndex.	IF-MIBInterfaceIndexr/w Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.363.1.1.2.1.2
cspanSessionAdminStatus This object is used to suspend an active session or activate an inactive session. Note that setting the value to the existing value has no effect on the operation. i.e. setting the value to 'active' when…	Enumerationr/w Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.363.1.1.2.1.3
cspanSessionOperStatus The current state of the session.	Enumeration Enumerated Values: 1 active 2 inactive	.1.3.6.1.4.1.9.9.363.1.1.2.1.4
cspanSessionInactiveReason The description of the reason that this session is not active. This string will be a zero length string in case the session is active.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.363.1.1.2.1.5
cspanSessionRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.363.1.1.2.1.6

The cspanSourcesIfTable is used to configure source
interfaces for SPAN sessions.

cspanSourcesIfEntry row .1.3.6.1.4.1.9.9.363.1.1.3.1

A SPAN source interface entry. Each entry consists of
session index, interface index of the source interface,
the ingress or egress direction of the traffic on that
interface and a rowStatus object

Indexes

cspanSessionIndex cspanSourcesIfIndex cspanSourcesDirection

Column	Syntax	OID
cspanSourcesIfIndex cspanSourcesIfIndex denotes the interface index for this session.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.363.1.1.3.1.1
cspanSourcesDirection cspanSourcesDirection denotes traffic direction on the cspanSourcesIfIndex.	Enumeration Enumerated Values: 1 receive 2 transmit	.1.3.6.1.4.1.9.9.363.1.1.3.1.2
cspanSourcesRowStatus Status of this row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.363.1.1.3.1.3

The cspanSourcesVsanTable is used to list source 
VSANs for SPAN sessions.

cspanSourcesVsanEntry row .1.3.6.1.4.1.9.9.363.1.1.4.1

An entry in the Source VSAN Table.
For the session identified by the instance
of cspanSessionIndex, it lists the VSANs
that comprise the sources.

Indexes

cspanSessionIndex

Column	Syntax	OID
cspanSourcesVsans2k The VSANs that are traffic sources to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifyin…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.4.1.1
cspanSourcesVsans4k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.4.1.2

The cspanSourcesVsanCfgTable is used to configure sources 
VSANs for SPAN sessions.

cspanSourcesVsanCfgEntry row .1.3.6.1.4.1.9.9.363.1.1.5.1

An entry in the source Vsan Configuration Table.

Each entry represents either an add or a delete
VSANs operation for the session identified by the
instance of cspanSourcesVsanCfgSessIndex.

The …

Indexes

cspanSourcesVsanCfgSessIndex

Column	Syntax	OID
cspanSourcesVsanCfgSessIndex A session index associated with a session for which the VSANs are to be added/deleted.	SessionIndex Type Constraints: range: 1..4095	.1.3.6.1.4.1.9.9.363.1.1.5.1.1
cspanSourcesVsanCfgCommand The command to be executed for this entry. Only acceptable commands are 'add' and 'remove'. 'none' is returned in case of read operation.	Enumerationr/w Enumerated Values: 1 add 2 remove 3 none	.1.3.6.1.4.1.9.9.363.1.1.5.1.2
cspanSourcesVsanCfgVsans2k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 …	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.5.1.3
cspanSourcesVsanCfgVsans4k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying V…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.5.1.4

The cspanVsanFilterTable is used to monitor and 
configure VSAN filters for SPAN sessions.
          
cspanVsanFilterSessIndex denotes the session index of
this sesion.
          
cspanVsanFilterVsans2k and cspanVsanFilterVsans4k denote 
the VSANs in a bit mask fashion for each session.

cspanVsanFilterEntry row .1.3.6.1.4.1.9.9.363.1.1.6.1

An entry in the VsanFilter Table.
cspanVsanFilterVsans2k and
cspanVsanFilterVsans4k denote the VSANs that
are part of the filter applied to the session
identified by the instance of cspanVsanFilterSessIndex.

Indexes

cspanVsanFilterSessIndex

Column	Syntax	OID
cspanVsanFilterSessIndex A session index associated with a session.	SessionIndex Type Constraints: range: 1..4095	.1.3.6.1.4.1.9.9.363.1.1.6.1.1
cspanVsanFilterVsans2k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 …	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.6.1.2
cspanVsanFilterVsans4k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying V…	CISCO-ZS-MIBFcList Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.6.1.3

cspanVsanFilterOpTable is used to configure  
VSAN filters for SPAN sessions.
          
cspanVsanFilterSessIndex denotes the session index of
this sesion.
          
cspanVsanFilterVsans denotes the VSANs in a bit mask fashion
for each session.

cspanVsanFilterOpEntry row .1.3.6.1.4.1.9.9.363.1.1.7.1

An entry in the VsanFilterOp Table.

Indexes

cspanVsanFilterOpSessIndex

Column	Syntax	OID
cspanVsanFilterOpSessIndex A session index associated with a session.	SessionIndex Type Constraints: range: 1..4095	.1.3.6.1.4.1.9.9.363.1.1.7.1.1
cspanVsanFilterOpCommand The command to be executed for this entry.	Enumerationr/w Enumerated Values: 1 add 2 remove 3 none	.1.3.6.1.4.1.9.9.363.1.1.7.1.2
cspanVsanFilterOpVsans2k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 1 through 8, the second octet specifying VSAN 9 …	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.7.1.3
cspanVsanFilterOpVsans4k The VSANs that are assigned to this session. Each octet within the value of this object specifies a set of eight VSANS with the first octet specifying VSAN 2048 through 2055, the second octet specifying V…	CISCO-ZS-MIBFcListr/w Type Constraints: range: 0..256	.1.3.6.1.4.1.9.9.363.1.1.7.1.4