CISCO-FABRIC-C12K-MIB Table View

A table providing ToFabFIA statistics and 
information in the managed system.

cfcGenericFabToFabEntry row .1.3.6.1.4.1.9.9.281.1.1.2.1.1

An entry providing various ToFabFIA statistics and
information of the associated linecard identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcGenericFabToFabState Indicates the current state of the ToFabFIA. active - ToFabFIA is currently active. On reaching a test point for the FIA errors, the ToFabFIA will be moved to halted state.	CfcFabricFiaState Type Values: 1 active 2 halted	.1.3.6.1.4.1.9.9.281.1.1.2.1.1.1
cfcGenericFabToFabGrantPEs Count of parity errors detected by the ToFabFIA on the grant lines to SCA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.1.2.1.1.2
cfcGenericFabToFabRequestPEs Count of parity errors detected by the ToFabFIA on the request lines to SCA. These errors are detected by the SCA and fed back to the ToFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.1.2.1.1.3
cfcGenericFabToFabCellFifoPEs Count of cell parity errors detected by the ToFabFIA while dequeuing cells from the cell fifo.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.1.2.1.1.4

A table providing FrFabFIA information in the
managed system.

cfcGenericFabFrFabEntry row .1.3.6.1.4.1.9.9.281.1.1.2.2.1

An entry providing FrFabFIA information of the
associated linecard identified by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcGenericFabFrFabState Indicates the current state of the FrFabFIA. active - FrFabFIA is currently active. On reaching a test point for the FIA errors, the FrFabFIA will be moved to halted state	CfcFabricFiaState Type Values: 1 active 2 halted	.1.3.6.1.4.1.9.9.281.1.1.2.2.1.1

A table providing per serial link information maintained 
by the FrFabFIA in the managed system.

cfcGenericFabFrFabSliEntry row .1.3.6.1.4.1.9.9.281.1.1.2.3.1

An entry providing per serial link information maintained
by the FrFabFIA on an associated linecard.

Indexes

ENTITY-MIBentPhysicalIndex cfcGenericFabFrFabSliFabIndex

Column	Syntax	OID
cfcGenericFabFrFabSliFabIndex The entPhysicalIndex of the switch fabric cards (CSC/SFC) present in the monitored system.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.281.1.1.2.3.1.1
cfcGenericFabFrFabSliLOSErrors Count of LOS errors detected by the FrFabFIA on the serial link to the fabric card identified by cfcGenericFabFrFabSliFabIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.1.2.3.1.2
cfcGenericFabFrFabSliCRCErrors Count of CRC errors detected by the FrFabFIA on the serial link to the fabric card identified by cfcGenericFabFrFabSliFabIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.1.2.3.1.3
cfcGenericFabFrFabSliLOSState State of LOS detection as enabled on FrFabFIA (identified by entPhysicalIndex) for the serial link to the switch fabric card identified by cfcGenericFabFrFabSliFabIndex. Value is either, (1) losOff …	Enumeration Enumerated Values: 1 losOff 2 losOn	.1.3.6.1.4.1.9.9.281.1.1.2.3.1.4

A table providing SCA statistics and information in 
the managed system.

cfcGenericScaEntry row .1.3.6.1.4.1.9.9.281.1.1.3.1.1

An entry providing various statistics and information
of SCA on an associated CSC identified by the
respective entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcGenericScaIdentifier The vendor-specific identifier string of SCA ASIC. This identifier generally includes the revision number and the manufacturing part number of SCA.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.1
cfcGenericScaIntrStatus Gives the status/occurrence of different alarm conditions in the SCA. This object is a read-clear object, that is the value of the object is cleared on every read.	CfcScaInterrupts Type Values: 0 lossOfSync 1 parityError 2 overflow	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.2
cfcGenericScaIntrsEnabled Gives the list of different alarm conditions enabled to be generated by the SCA.	CfcScaInterrupts Type Values: 0 lossOfSync 1 parityError 2 overflow	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.3
cfcGenericScaConfig Gives the current configuration of the SCA ASIC. quarterBandwidth (0) -- 1/4th of the full bandwidth is supported per slot by the switch.…	Bits Enumerated Values: 0 quarterBandwidth 1 halfBandwidth 2 fullBandwidth 3 enableParity 4 priMcast 5 priUnicast 6 priAlternating 7 earlyIntrOnLOS 8 noEarlyIntrOnLOS 9 forceXbarParityXer 10 forceGrantParityXer 11 unicastAcceptMode 12 forceXbarCrcOnCtlLink0 13 forceXbarCrcOnCtlLink1 14 forceXbarCrcOnCtlLink2 15 forceXbarCrcOnCtlLink3	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.4
cfcGenericScaPELog Indicates the modules which caused the parity error and resulted in an interrupt. The corresponding bit is set on occurrence of parity error for a module. This object is a read-clear object, that is the value of the ob…	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.5
cfcGenericScaFifoOverflowLog Indicates the modules which caused an overflow at the request fifo and resulted in an interrupt. The corresponding bit is set on occurrence of fifo overflow for a module. This object is a read-clear object, that is t…	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.6
cfcGenericScaLCsEnabled Indicates the modules which are present and the SCA has been configured to start accepting requests from this module.	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.7
cfcGenericScaForcedBackPressure Indicates the linecards which exerted backpressure. SCA will not grant Xbar connection to these linecards.	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.8
cfcGenericScaOc192LCsPresent Indicates the OC192 linecards present in the monitored system. The corresponding bit is set for each linecard present, indicating the postion.	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.9
cfcGenericScaPreOc192LCsPresent Indicates the Pre-OC192 linecards present in the monitored system. The corresponding bit is set for each linecard present, indicating the position.	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.3.1.1.10

A table providing Xbar information in the 
managed system.

cfcGenericXbarEntry row .1.3.6.1.4.1.9.9.281.1.1.4.1.1

An entry providing Xbar information on an associated
fabric card identified by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcGenericXbarIdentifier The vendor-specific identifier string of Xbar ASIC. This identifier generally includes the revision number and the manufacturing part number of Xbar.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.1.4.1.1.1

A table providing pre-OC192 ToFabFIA statistics and 
information in the managed system.

cfcPreOc192FabToFabEntry row .1.3.6.1.4.1.9.9.281.1.2.1.1.1

An entry providing various statistics and
counters of pre-OC192 ToFabFIA on an associated
linecard identified by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcPreOc192FabToFabScaLosts Indicates the number of times the ToFabFIA lost contact with SCA(scheduler controller Asic) on master CSC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.1
cfcPreOc192FabToFabUCFifoOvFlws Count of unicast fifo overflow errors on the ToFabFIA. Problems between BMA/CSAR and the ToFabFIA may be one of the reasons for these errors.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.2
cfcPreOc192FabToFabUCFifoUnFlws Count of unicast fifo underflow errors on the ToFabFIA. These errors are caused by the SCA granting without actually getting a request from the ToFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.3
cfcPreOc192FabToFabMCFifoErrs Count of multicast fifo overflow and underflow errors on the ToFabFIA. Problems between BMA/CSAR and the ToFabFIA may be one of the reasons for multicast fifo overflow errors. Underflow errors are caused by the SCA g…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.4
cfcPreOc192FabToFabBmaPEs Count of parity errors on cells received from BMA by the ToFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.5
cfcPreOc192FabToFabBmaHskErrs Count of handshake errors between the BMA/CSAR and the ToFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.6
cfcPreOc192FabToFabUniDestMCRqs Count of requests with single destination in a multicast request detected by ToFabFIA. The FIA will send this cell to the destination.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.7
cfcPreOc192FabToFabMultiDstUCRqs Count of requests with multiple destinations in a unicast request detected by a ToFabFIA. The FIA will drop this cell.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.8
cfcPreOc192FabToFabEmptyDestRqs Count of requests with empty destination detected by ToFabFIA. The FIA will drop this cell.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.1.1.9

A table providing pre-OC192 FrFabFIA statistics and 
information in the managed system.

cfcPreOc192FabFrFabEntry row .1.3.6.1.4.1.9.9.281.1.2.1.2.1

An entry providing various statistics and information
of pre-OC192 FrFabFIA on an associated linecard
identified by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcPreOc192FabFrFabCellFifoPEs Count of cisco cell fifo parity errors detected by the FrFabFIA while dequeuing cells from the cell fifo.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.2.1.1
cfcPreOc192FabFrFabRedFifoPEs Count of redundant data fifo parity errors detected by the FrFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.2.1.2
cfcPreOc192FabFrFabRedFifoOvflws Count of redundant data fifo overflow errors detected by the FrFabFIA. This is caused if the back pressure is broken (i.e. the FrFabFIA exerts back pressure and the SCA keeps giving more data to it).	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.2.1.3
cfcPreOc192FabFrFabCellDrops Count of number of cells dropped by the FrFabFIA. In case of non-redundant fabric configuration, cell drops can occur when a parity error is detected on one or more than one serial link. In case of redundant fabric co…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.1.2.1.4

A table providing pre-OC192 SCA statistics and 
information in the managed system.

cfcPreOc192ScaEntry row .1.3.6.1.4.1.9.9.281.1.2.2.1.1

An entry providing various statistics and information
of pre-OC192 SCA on an associated CSC identified by
entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcPreOc192ScaReSyncDelay The number of cell periods that the SCA will allow the serial links connected to a module and Xbar to be resynced, if a loss-of-sync has occurred on the corresponding module. The value '0' indicates that on occurrence…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.2.2.1.1.1
cfcPreOc192ScaLOSLog Indicates the LOS event occurrence on each linecard connected to this CSC. The corresponding bit is set on occurrence of LOS event on a line card. This object is a read-clear object, that is the value of the object i…	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.2.2.1.1.2

A table providing Pre-OC192 Xbar statistics and
information in the managed system.

cfcPreOc192XbarEntry row .1.3.6.1.4.1.9.9.281.1.2.3.1.1

An entry providing various statistics and information
of Pre-OC192 Xbar on an associated fabric card identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcPreOc192XbarIntrStatus Indicates the occurrence of different alarm conditions in Xbar. This object is a read-clear object, that is the value of the object is cleared on every read.	Bits Enumerated Values: 0 frameLossOfSync 1 parityErrorFromSca	.1.3.6.1.4.1.9.9.281.1.2.3.1.1.1
cfcPreOc192XbarParityChkStatus Indicates the parity check state in control data received from SCA to the Xbar. true(1) indicates that the parity check is enabled. false(2) indicates that the parity check is disabled.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.281.1.2.3.1.1.2

A table providing OC192 ToFabFIA statistics 
and information in the managed system.

cfcOc192FabToFabEntry row .1.3.6.1.4.1.9.9.281.1.3.1.1.1

An entry providing various statistics and information
of OC192 ToFabFIA on an associated linecard identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcOc192FabToFabMccDataPEs Count of the parity errors on data lines from MCC to ToFabFIA. This error would cause the ToFabFIA to halt.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.1
cfcOc192FabToFabMccCmdPEs Count of the parity errors on command lines from MCC to ToFabFIA. This error would cause the ToFabFIA to halt.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.2
cfcOc192FabToFabBackPressurePEs Count of the parity errors on back pressure line from FrFabFIA to ToFabFIA. This error would cause the ToFabFIA to halt.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.3
cfcOc192FabToFabCellFifoOvFlws Count of the cell fifo overflow errors detected by the ToFabFIA. This error would cause the ToFabFIA to halt.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.4
cfcOc192FabToFabCellFifoUnFlws Count of the cell fifo underflow errors detected by the ToFabFIA. This error would cause the ToFabFIA to halt.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.5
cfcOc192FabToFabMccCmdSeqEndErrs Count of the illegal sequence of command errors where a middle or start command followed by a start command is received from MCC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.6
cfcOc192FabToFabMccCmdSeqStrErrs Count of the illegal sequence of command errors where an end command followed by an end or middle command is received from MCC.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.1.1.7

A table providing FrFabFIA statistics and 
information in the managed system.

cfcOc192FabFrFabEntry row .1.3.6.1.4.1.9.9.281.1.3.1.2.1

An entry providing various statistics and information
of OC192 FrFabFIA on an associated linecard identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcOc192FabFrFabPktLenErrs Count of the packets (after reassembly from Cisco cells) which exceed the maximum permitted packet length of FrFabFIA. These packets will be dropped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.1
cfcOc192FabFrFabExtRamPEs Count of the parity errors detected in FrFabFIA's external SRAM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.2
cfcOc192FabFrFabPktLenPEs Count of the parity errors detected in payload packet length field of the FrFabFIA's Payload Header SRAM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.3
cfcOc192FabFrFabHdrSramPEs Count of the parity errors detected in payload header field of the FrFabFIA's Payload Header SRAM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.4
cfcOc192FabFrFabTxCtrlPEs Count of the parity errors detected on the Tx control bits of FrFabFIA.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.5
cfcOc192FabFrFabHdrFifoOvFlws Count of the overflow errors in the FrFabFIA's reassembly fifos in the on-chip payload header SRAM.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.6
cfcOc192FabFrFabExtSramOvFlws Count of the overflow errors in the FrFabFIA's reassembly external SRAM's payload fifos.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.7
cfcOc192FabFrFabFirstLastErrs Count of the First-Last errors detected by FrFabFIA's. If a first cell is received for a reassembly fifo, while an earlier packet in the same reassembly fifo is still waiting for its last cell, then it is called a Firs…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.8
cfcOc192FabFrFabSeqErrs Count of the sequence errors detected by FrFabFIA in the cells received for reassembly. If a cell is received whose sequence number is not an unit increment from the previous cell of the same packet then it is a seque…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.2.1.9

A table providing per serial link information maintained 
by the OC192 FrFabFIA in the managed system.

cfcOc192FabFrFabSliEntry row .1.3.6.1.4.1.9.9.281.1.3.1.3.1

An entry providing per serial link information maintained
by the OC192 FrFabFIA on an associated linecard identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex cfcOc192FabFrFabSliSwitchIndex

Column	Syntax	OID
cfcOc192FabFrFabSliSwitchIndex The entPhysicalIndex of the switch fabric cards (CSC/SFC) present in the monitored system.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.281.1.3.1.3.1.1
cfcOc192FabFrFabSliXorErrs Count of the XOR check errors detected by FrFabFIA reassembly. The data paths are horizontally XORed and the result is expected to match the contents of the redundant path else it is counted as XOR error, this error ap…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.3.1.2
cfcOc192FabFrFabSliCellDrops Count of the total cells dropped by the FrFabFIA from the fabric card due to uncorrectable errors. Uncorrectable errors are the errors other than CRC, LOS, Horizontal XOR and idle cell which cannot be corrected.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.3.1.3

A table providing per module statistics information 
maintained by the OC192 FrFabFIA in the managed system.

cfcOc192FabFrFabStatEntry row .1.3.6.1.4.1.9.9.281.1.3.1.4.1

An entry providing per module statistics information
maintained by the OC192 FrFabFIA on an associated
linecard identified by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex cfcOc192FabFrFabStatLCIndex

Column	Syntax	OID
cfcOc192FabFrFabStatLCIndex The entPhysicalIndex of the Line card present in the monitored system.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.281.1.3.1.4.1.1
cfcOc192FabFrFabStatUCHiPktDrops Count of Unicast high priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.4.1.2
cfcOc192FabFrFabStatUCLoPktDrops Count of Unicast low priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.4.1.3
cfcOc192FabFrFabStatMCHiPktDrops Count of Multicast high priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.4.1.4
cfcOc192FabFrFabStatMCLoPktDrops Count of Multicast low priority packets dropped, from source module indicated by cfcOc192FabFrFabStatLCIndex.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.1.4.1.5

A table providing OC192 SCA statistics and information in
the managed system.

cfcOc192ScaEntry row .1.3.6.1.4.1.9.9.281.1.3.2.1.1

An entry providing various statistics and information
of OC192 SCA on an associated CSC identified by
entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcOc192ScaRotationPeriod Determines the period of rotating the priority between Unicast and Multicast, in cell periods, when the SCA is configured with alternating priority mode. For example, if the value of this object is 63 then the priorit…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.281.1.3.2.1.1.1
cfcOc192ScaDisableGrants Indicates the disable of grants by SCA to any requests coming from a specific module. The corresponding bit is set for each module.	CfcSlotMask Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.281.1.3.2.1.1.2

A table providing OC192 Xbar statistics and information 
in the managed system.

cfcOc192XbarEntry row .1.3.6.1.4.1.9.9.281.1.3.3.1.1

An entry providing various statistics and information
of OC192 Xbar on an associated fabric card identified
by entPhysicalIndex.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
cfcOc192XbarCtrlLOSStatus Indicates the occurrence of LOS errors on the control path of Xbar. frameLosErr (0) -- Frame LOS error. sliErrorOnControlLink0 (1) -- LOS detected on SLI contr…	Bits Enumerated Values: 0 frameLosErr 1 sliErrorOnControlLink0 2 sliErrorOnControlLink1 3 sliErrorOnControlLink2 4 sliErrorOnControlLink3	.1.3.6.1.4.1.9.9.281.1.3.3.1.1.1
cfcOc192XbarCtrlCRCErr Indicates the occurrence of CRC error on any of the four control links. This object is a read-clear object, that is the value of the object is cleared on every read.	Bits Enumerated Values: 0 ctlCrcErrorLink0 1 ctlCrcErrorLink1 2 ctlCrcErrorLink2 3 ctlCrcErrorLink3	.1.3.6.1.4.1.9.9.281.1.3.3.1.1.2