CISCO-ETHERNET-FABRIC-EXTENDER-MIB Table View

This table has the binding information of a
'Fabric Port' to 'Fabric Extender' on a 
'Extender Core Switch'.  Each entry in this table 
configures one fabric port.  
          
A core switch does not accept fabric extender 
connections into its fabric ports unless the
extender matches an entry in this table.  Once matched,
the extender is identified by the instances of the
cefexBindingExtenderIndex in the matching row.
          
The matching criteria and values to match for 
each fabric extender are specified in a row in the
cefexConfigTable.  Each row in the cefexConfigTable 
is indexed by cefexBindingExtenderIndex.  Each row
in this table has an unique cefexBindingExtenderIndex
value, therefore, providing the linkage between
the two tables. 
          
It is expected that user first creates a row in
the cefexConfigTable for a specific cefexBindingExtenderIndex,
followed by creation of the corresponding row in
this table for the same cefexBindingExtenderIndex..
If a row in this table is created and if there is
no corresponding row created in the cefexConfigTable, 
then the agent will automatically create a row in the 
cefexConfigTable with instance of every object in this
row initialized to the DEFVAL.

cefexBindingEntry row .1.3.6.1.4.1.9.9.691.1.1.1.1

There is one entry in this table for each core switch
Interface that can be connected to an uplink interface
of a fabric extender.

Indexes

cefexBindingInterfaceOnCoreSwitch

Column	Syntax	OID
cefexBindingInterfaceOnCoreSwitch This object is the index that uniquely identifies an entry in the cefexBindingTable. The value of this object is an IfIndex to a fabric port. By creating a row in this table for a particular core switch interface, th…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.691.1.1.1.1.1
cefexBindingExtenderIndex The value of cefexBindingExtenderIndex used as an Index into the cefexConfigTable to select the Fabric Extender configuration for this binding entry. However, a value in this table does not imply that an instance with …	Unsigned32r/w Constraints: range: 100-999	.1.3.6.1.4.1.9.9.691.1.1.1.1.2
cefexBindingCreationTime The timestamp of this entry's creation time.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.691.1.1.1.1.3
cefexBindingRowStatus The status of this conceptual row.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.691.1.1.1.1.4

This table facilitates configuration applicable
to an entire fabric extender.

cefexConfigEntry row .1.3.6.1.4.1.9.9.691.1.1.2.1

There is one entry in this table for each fabric
extender configured on the core switch.

Indexes

cefexBindingExtenderIndex

Column	Syntax	OID
cefexConfigExtenderName This object specifies a human readable string representing the name of the 'Extender'. Note that default value of this object will be the string 'FEXxxxx' where xxxx is value of cefexBindingExtenderIndex expressed as 4…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.691.1.1.2.1.1
cefexConfigSerialNumCheck This object specifies if the serial number check is enabled for this extender or not. If the value of this object is 'true', then the core switch rejects any extender except for the one with serial number string speci…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.691.1.1.2.1.2
cefexConfigSerialNum This object allows the user to identify a fabric extender's Serial Number String. This object is relevant if cefexBindingSerialNumCheck is true. Zero is not a valid length for this object if cefexBindingSerialNumCheck …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.691.1.1.2.1.3
cefexConfigPinningFailOverMode This object allows the user to identify the fabric port failure handling method when pinning is used.	CiscoPortPinningModer/w Type Values: 1 static	.1.3.6.1.4.1.9.9.691.1.1.2.1.4
cefexConfigPinningMaxLinks This object allows the user to identify number of fabric ports to be used in distribution of pinned non fabric ports. As described above, pinning is the forwarding model used for fabric extenders that do not support lo…	Unsigned32r/w Constraints: range: 1-100	.1.3.6.1.4.1.9.9.691.1.1.2.1.5
cefexConfigCreationTime The timestamp when the value of the corresponding instance of 'cefexConfigRowStatus' is made active. If an user modifies objects in this table, the new values are immediately activated. Depending on the object changed,…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.691.1.1.2.1.6
cefexConfigRowStatus The status of this conceptual row. A row in this table becomes active immediately upon creation.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.691.1.1.2.1.7