CISCO-ES-STACK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
14
Rows
14
Columns
149

ciscoEsTrapRcvrTable

table mandatory
.1.3.6.1.4.1.9.5.14.1.1.25 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsTrapRcvrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsTrapRcvrTable'
Trap Receiver Table for each vlan.
ciscoEsTrapRcvrEntry row .1.3.6.1.4.1.9.5.14.1.1.25.1
Definition of each row in the vlan specific trap
receiver table.
Column Syntax OID
Trap receiver index for each entry.
Integer32
Constraints:
range: 1-20
.1.3.6.1.4.1.9.5.14.1.1.25.1.1
Setting the value of this object to invalid(3)
deletes the row from the table. The value
invalid(3) should never be returned on a GET.

Setting this value to create(4) causes a new row
to be created if …
Enumerationr/w
Enumerated Values:
1other
2valid
3invalid
4create
.1.3.6.1.4.1.9.5.14.1.1.25.1.2
IP address for an SNMP manager that is to receive
the trap.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.5.14.1.1.25.1.3
Community string to use.
OctetStringr/w
Constraints:
range: 1-16
.1.3.6.1.4.1.9.5.14.1.1.25.1.4
VLANs to which traps to this target are sent
out on. Each octet within the value of this object
specifies a set of eight vlans, with the first
octet specifying vlans 0 through 7, the second
octet specifying vlans 8 …
OctetStringr/w
Constraints:
range: 128-128
.1.3.6.1.4.1.9.5.14.1.1.25.1.5

ciscoEsStackTable

table mandatory
.1.3.6.1.4.1.9.5.14.2.1 · 1 row entry · 28 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsStackTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsStackTable'
Stack information table. This table provides
the current configuration of the stack. It also
provides a mapping of Switch Numbers to their 
addresses.
          
The Management Application is required to retrieve this
table and verify its own view of the stack periodically
and/or when it receives a trap indicating a change in the 
 stack configuration.
ciscoEsStackEntry row .1.3.6.1.4.1.9.5.14.2.1.1
Definition of each row in the Stack Table
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.2.1.1.1
Mac address of the switch.
MacAddr
Type Constraints:
range: 6
.1.3.6.1.4.1.9.5.14.2.1.1.2
Version number for the firmware running on the switch.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.9.5.14.2.1.1.3
Hardware version number for the switch.
OctetString
Constraints:
range: 1-128
.1.3.6.1.4.1.9.5.14.2.1.1.4
Time ticks since the switch was last reset.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.6
Operational status of the box. Setting this value
to either coldReset (2) or warmReset (3) will cause
cold start or warm start to occur after a specific
time delay.
Enumerationr/w
Enumerated Values:
1running
2coldReset
3warmReset
.1.3.6.1.4.1.9.5.14.2.1.1.7
Temperature status of each switch.
Enumeration
Enumerated Values:
1normal
2toohigh
3unknown
.1.3.6.1.4.1.9.5.14.2.1.1.8
Installed memory on the switch in MB.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.2.1.1.9
Port number to be monitored through the SwitchProbe.
Setting this object to zero turns off SwitchProbe.
Integer32r/w
Constraints:
range: 0-32
.1.3.6.1.4.1.9.5.14.2.1.1.10
Direction of traffic to monitor on the SwitchProbe.
Enumerationr/w
Enumerated Values:
1transmit
2receive
3both
4none
.1.3.6.1.4.1.9.5.14.2.1.1.11
This object indicates whether the switch is enabled
to support enhanced features.
Enumeration
Enumerated Values:
1standard
2enhanced
3unknown
.1.3.6.1.4.1.9.5.14.2.1.1.12
Feature key to enable enhanced features.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.2.1.1.13
A bit mask representing all the ports present in this
switch. Each octet within the value of this object
specifies a set of eight ports, with the first octet
specifying ports 1 through 8, the second octet specifying
OctetString
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.2.1.1.14
Aging time in minutes for the master address table entries
on this switch.
Integer32r/w
Constraints:
range: 0-9999
.1.3.6.1.4.1.9.5.14.2.1.1.15
Threshold to demand age the master address table. All
numbers refer to percentage of the address table. The
only values accepted by the agent are 50,60,70,80,90
and 0. Setting the value to 0 disables demand aging.
Integer32r/w
Constraints:
range: 0-90
.1.3.6.1.4.1.9.5.14.2.1.1.16
Number of times the switch was out of buffers.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.17
Total number of frames sent to the CPU on this switch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.18
Total number of frames in error on this switch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.19
Total number of frames which were too short received
on this switch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.20
Total number of frames which were too long received
on this switch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.21
Total number of received frames dropped by switch.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.22
Number of times incoming frames had to be dropped
because of no more memory available.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.23
Total number of requests made by the CPU to send
out a frame.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.24
Total number of frames sent out from this switch
requested by the CPU.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.25
The length of the longest hash chain in the CPU hash
table.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.26
Total number of times the hash table was full when
trying to add an entry.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.2.1.1.27
The switch Id used to uniquely identify the kind of the
cisco ethernet switch.
ObjectIdentifier .1.3.6.1.4.1.9.5.14.2.1.1.28
Control of setting the ports to full or half duplex.
Enumerationr/w
Enumerated Values:
1hardware
2software
.1.3.6.1.4.1.9.5.14.2.1.1.29

ciscoEsModTable

table mandatory
.1.3.6.1.4.1.9.5.14.3.1 · 1 row entry · 7 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsModTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsModTable'
Module configuration table. Each EtherSwitch
the set of 10 MB Ports is considered as slot 1.
Each additional card which plugs into the system
is numbered based on where the card is plugged into.
ciscoEsModEntry row .1.3.6.1.4.1.9.5.14.3.1.1
Definition of each row in the Module Table
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.3.1.1.1
The module number.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.3.1.1.2
The state indicates the current operational state of the
module.
Enumeration
Enumerated Values:
1nomodule
2running
3stopped
4faulty
.1.3.6.1.4.1.9.5.14.3.1.1.3
The type of module plugged in to the slot. Module type
system (1) represents the mother board with the CPU and
system memory. In RSM the system module always occupies
slot 2. Module state none (6) represents a slot wit…
Enumeration
Enumerated Values:
1system
2ws-X3004
3ws-X3001
4ws-X3005
5ws-X3002
6ws-X3013
7ws-X3003
8ws-X3006
9unknown
10none
11ws-X3007-8
12ws-X3009
13ws-X3010
14ws-X3011
.1.3.6.1.4.1.9.5.14.3.1.1.4
The module revision number.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.3.1.1.5
Total number of ports in the module.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.3.1.1.6
Time in 1/100 seconds since the module was last reset.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.3.1.1.7

ciscoEsPortTable

table mandatory
.1.3.6.1.4.1.9.5.14.4.1 · 1 row entry · 45 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsPortTable'
A table of information about each port. For 
Cisco ports only the following Counters
are valid:
	ciscoEsPortInFrames
	ciscoEsPortOutFrames
	ciscoEsPortInOctets
	ciscoEsPortOutOctets
	ciscoEsPortLongFrames
	ciscoEsPortShortFrames
	ciscoEsPortSWHandledFrames
	ciscoEsPortInBufOverflows
	ciscoEsPortOutBufOverflows
	ciscoEsPortPktsInErrors
	ciscoEsPortForwardedFrames
All other Counters will return 0 for such ports.
ciscoEsPortEntry row .1.3.6.1.4.1.9.5.14.4.1.1
Definition of rows in the port table.
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.4.1.1.1
A unique value for each port entry. The value
corresponds the port number.
Integer32
Constraints:
range: 1-32
.1.3.6.1.4.1.9.5.14.4.1.1.2
Module number of the module that contains this port.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.9.5.14.4.1.1.3
A pointer to the entry in the ifTable corresponding
to this port.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.4.1.1.4
Indicates whether the port is jumper configured
for full or half duplex operation. Note:
internal connected ports are always
halfDuplex(2).
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
.1.3.6.1.4.1.9.5.14.4.1.1.5
Number of frames received where the destination
is on this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.6
Number of frames received on this port and
forwarded to another port or the system module
for processing.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.7
Highest number of stations ever active at any
time since the last reset of the switch as seen by
this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.8
Maximum number of stations which the port can
support simultaneously.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.9
Number of Frames received on this port and
delivered to the system module for processing.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.10
Number of stations on this port which belong to
the local segment.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.11
Number of stations on this port which belong to
another segment.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.12
Number of unicast frames received on this port
and forwarded to the system module for processing
because the source or destination station address
is not in the port's forwarding table.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.13
Setting this object to reset(3) causes all
traffic counters for this port to be set to zero.
Also the value of ciscoEsPortResetTimer is set to
zero.
Enumerationr/w
Enumerated Values:
1other
2running
3reset
.1.3.6.1.4.1.9.5.14.4.1.1.14
Time (in 100th second ticks) since the port
counters were reset.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.15
Setting this object to reset(3) clears all
address table entries for this port as well as
setting all port traffic counters to zero and
setting ciscoEsPortResetTimer to zero.
Enumerationr/w
Enumerated Values:
1other
2running
3reset
.1.3.6.1.4.1.9.5.14.4.1.1.16
Total Number of Frames received on this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.17
Total Number of Frames transmitted by this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.18
Total Number of Frames received on this port which were
too long.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.19
Total Number of Frames received on this port which were
too short.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.20
Total Number of Frames received on this port which
caused a receive buffer overflow.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.21
Total Number of Frames which could not be transmitted
from this port because of transmit buffer overflow.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.22
Number of Broadcast Frames received on this port
without errors.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.23
Number of Multicast Frames received on this port
without errors.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.24
Number of frames switched on this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.25
Total number of octets received through this
port. This counter is the same as the
ifInOctets counter in ifTable corresponding
to this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.26
Total number of octets transmitted from this
port. This counter is the same as the
ifOutOctets counter in ifTable corresponding
to this port.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.27
Total number of packets received or transmitted
from this port and there was an error.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.28
Link state of the port.
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.9.5.14.4.1.1.29
Operational status of the port. Failed is returned
when the the port fails power-on diagnostic tests.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
3failed
.1.3.6.1.4.1.9.5.14.4.1.1.30
Indicates whether the port is configured as MDI or
MDIX or none (meaning not applicable). This object is also
used to show the termination status for 10Base2 type ports.
Enumeration
Enumerated Values:
1mdi
2mdix
3none
4internal-term-on
5internal-term-off
.1.3.6.1.4.1.9.5.14.4.1.1.31
Number of times a hash bucket was full when trying to
add an entry to the port address table.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.32
Number of times the address table was full when trying
to add an entry to the port address table.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.1.1.33
Port level address aging time in minutes. Setting this object
to zero disables address aging.
Integer32r/w
Constraints:
range: 0-9999
.1.3.6.1.4.1.9.5.14.4.1.1.34
Threshold to demand age the port address table. All
numbers refer to percentage of the address table. The
only values accepted by the agent are 50,60,70,80,90
and 0. Setting the value to 0 disables demand aging.
Integer32r/w
Constraints:
range: 0-90
.1.3.6.1.4.1.9.5.14.4.1.1.35
Set bridging mode for the port.
Enumerationr/w
Enumerated Values:
1ieee8021d
2cutthru
3auto
.1.3.6.1.4.1.9.5.14.4.1.1.36
Operational bridging mode for the port.
Enumeration
Enumerated Values:
1ieee8021d
2cutthru
3unknown
.1.3.6.1.4.1.9.5.14.4.1.1.37
Threshold error rate when the port moves from
cut-through to store and forward mode.
Integer32r/w
Constraints:
range: 0-100
.1.3.6.1.4.1.9.5.14.4.1.1.38
Configure learning state on this port.
Enumerationr/w
Enumerated Values:
1normal
2disableSrcLearning
3disableDstnLearning
4disableLearning
.1.3.6.1.4.1.9.5.14.4.1.1.39
Turn on/off runtless filtering on this port. When this
this mode is turned on, no runts will be forwarded.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.9.5.14.4.1.1.40
Type of port.
Enumeration
Enumerated Values:
1type-10BaseT
2type-StkPort
3type-100BaseT
4type-100BaseFx
5type-10BaseT-4
6type-10Base2
7type-10BaseFL
8type-ATM155
9unknown
10type-100VG-Fx
11type-100VG-Tx
12type-ISL-FX
13type-ISL-TX
14type-R2503
.1.3.6.1.4.1.9.5.14.4.1.1.41
The advertised time-to-live parameter on all CDP messages
generated by this switch on this vlan.
Integer32r/w
Constraints:
range: 0-255
.1.3.6.1.4.1.9.5.14.4.1.1.42
Indicates whether the port is enable or disable
for fast port support. When fast port is enable,
port state will go to forwarding as soon as the
link is up.
Enumerationr/w
Enumerated Values:
1disable
2enable
.1.3.6.1.4.1.9.5.14.4.1.1.43
The current operational mode for an ISL port.
Enumeration
Enumerated Values:
1trunking
2non-trunking
.1.3.6.1.4.1.9.5.14.4.1.1.44
Used to configure the DISL modes for an ISL trunk port.
Enumerationr/w
Enumerated Values:
1on
2off
3desirable
4auto
.1.3.6.1.4.1.9.5.14.4.1.1.45

ciscoEsOptPortStaTable

table mandatory
.1.3.6.1.4.1.9.5.14.4.2 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsOptPortStaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsOptPortStaTable'
A table of station addresses known at an
individual port.  This table is designed to reduce
the number of SNMP GETNEXT requests.  This is done
by packing many values into an octet string.  (The
maximum size frame should be used to return the
result.) The instance returned for a GETNEXT is
the value that identifies the last 'row' in the
octet string.  When the table is completely
retrieved with one or more GETNEXTs, duplicate
entries may be present, and entries may be skipped
if the table is changing while being retrieved.
ciscoEsOptPortStaEntry row .1.3.6.1.4.1.9.5.14.4.2.1
Definition of the rows in the optimized port
station address table. Rows can not be created or
deleted via SNMP requests.
Column Syntax OID
Third index for items in the optimized port
station address table.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.5.14.4.2.1.1
An OCTET STRING containing a multiple number of
stations from a port station address table. Each entry
is encoded in the following format:
Station MAC address - 6 octets
Location 1 - local
2 - remote - 1 octet
OctetString .1.3.6.1.4.1.9.5.14.4.2.1.2

ciscoEsPortStnTable

table mandatory
.1.3.6.1.4.1.9.5.14.4.3 · 1 row entry · 9 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsPortStnTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsPortStnTable'
Port station table.
ciscoEsPortStnEntry row .1.3.6.1.4.1.9.5.14.4.3.1
Definition of the Conceptual row in the Port station table.
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.4.3.1.1
Port number corresponding to this entry.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.4.3.1.2
Station MAC address.
MacAddr
Type Constraints:
range: 6
.1.3.6.1.4.1.9.5.14.4.3.1.3
Where the station is located.
Enumeration
Enumerated Values:
1local
2remote
.1.3.6.1.4.1.9.5.14.4.3.1.4
Number of frames with this station as the source.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.3.1.5
Number of Bytes with this station as the source.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.3.1.6
Number of frames with this station as the destination.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.3.1.7
Number of bytes with this station as the destination.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.4.3.1.8
A bit string that identifies the ports that frames
destined to this address are forwarded to when received
on this port.
Each octet within the value of this object
specifies a set of eight ports, with the first octet
OctetString
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.4.3.1.9

ciscoEsECTable

table mandatory
.1.3.6.1.4.1.9.5.14.6.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsECTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsECTable'
The EtherChannel table.
ciscoEsECEntry row .1.3.6.1.4.1.9.5.14.6.1.1
Definition of each row in the EtherChannel
table.
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.6.1.1.1
The EtherChannel number for this row.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.6.1.1.2
The set of ports in this switch which are active in this
EtherChannel. Each octet within the value of this object
specifies a set of eight ports, with the first octet
specifying ports 1 through 8, the second octet sp…
OctetStringr/w
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.6.1.1.3

ciscoEsFilterTable

table mandatory
.1.3.6.1.4.1.9.5.14.7.1 · 1 row entry · 8 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsFilterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsFilterTable'
Filters set up in the switch.
ciscoEsFilterEntry row .1.3.6.1.4.1.9.5.14.7.1.1
Definition of each row in the filter table.
Column Syntax OID
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.7.1.1.1
The destination MAC address in a frame to which
this entry's filtering information applies.
MacAddr
Type Constraints:
range: 6
.1.3.6.1.4.1.9.5.14.7.1.1.2
There are two types of filters
(i) source filters which act on the source address
portion of a packet and
(ii) destination filters which act on the destination
address portion of a packet.
Enumeration
Enumerated Values:
1source-filter
2destination-filter
.1.3.6.1.4.1.9.5.14.7.1.1.3
The set of ports to which this filter is applied.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 through 8, the second octet specifying ports 9
throu…
OctetStringr/w
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.7.1.1.4
The filter mask for this station. The semantics of the
filter mask depend on the type of filter.
Each octet within the value of this object specifies
a set of eight ports, with the first octet specifying
ports 1 throu…
OctetStringr/w
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.7.1.1.5
In case of destination filters you can specify
a particular port in a remote box as the destination
port for a given station address. A value of 0 indicates
no remote switch is configured.
Integer32r/w
Constraints:
range: 0-8
.1.3.6.1.4.1.9.5.14.7.1.1.6
In case of destination filters you can specify
a particular port in a remote box as the destination
port for a given station address. A value of 0 indicates
no remote ports assigned.
Integer32r/w
Constraints:
range: 0-29
.1.3.6.1.4.1.9.5.14.7.1.1.7
GET request always returns valid (1). Set this object
to invalid (2) to delete an entry.
Enumerationr/w
Enumerated Values:
1valid
2invalid
.1.3.6.1.4.1.9.5.14.7.1.1.8

ciscoEsVLANPortTable

table mandatory
.1.3.6.1.4.1.9.5.14.8.1 · 1 row entry · 3 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsVLANPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsVLANPortTable'
VLAN configuration table.
ciscoEsVLANPortEntry row .1.3.6.1.4.1.9.5.14.8.1.1
Definition of each row in the vlan Table
Column Syntax OID
VLAN identifier for this row.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.9.5.14.8.1.1.1
Switch number determined by the port number
that the switch is connected to in a
Matrix or as determined by the Stack Management
software when two switches are connected back
to back.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.8.1.1.2
The set of ports in this switch which belong to this
VLAN. Each octet within the value of this object
specifies a set of eight ports, with the first octet
specifying ports 1 through 8, the second octet specifying
po…
OctetStringr/w
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.8.1.1.3

ciscoEsVLANInfoTable

table mandatory
.1.3.6.1.4.1.9.5.14.8.2 · 1 row entry · 12 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsVLANInfoTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsVLANInfoTable'
VLAN Information table.
ciscoEsVLANInfoEntry row .1.3.6.1.4.1.9.5.14.8.2.1
Definition of each row in the vlan Table
Column Syntax OID
VLAN identifier for this row.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.9.5.14.8.2.1.1
Current state of the vlan. If a vlan has at least
one port, it is considered active (1).
Enumeration
Enumerated Values:
1active
2inactive
.1.3.6.1.4.1.9.5.14.8.2.1.2
User defined name of the vlan.
OctetStringr/w
Constraints:
range: 1-32
.1.3.6.1.4.1.9.5.14.8.2.1.3
The MAC address assigned to this vlan. This address
is the MAC address of the lowest numbered port in the
vlan.
MacAddr
Type Constraints:
range: 6
.1.3.6.1.4.1.9.5.14.8.2.1.4
The ifIndex of the interface entry corresponding
to each vlan.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.2.1.5
IP configuration for this vlan.
Enumerationr/w
Enumerated Values:
1disabled
2auto-bootp
3always-bootp
.1.3.6.1.4.1.9.5.14.8.2.1.6
IP Address assigned to this vlan. Changes to the
IP Address of the vlan to which the management
station belongs cause loss of connectivity until
the management station updates its information about
the IP Address.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.5.14.8.2.1.7
The subnet mask for this vlan.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.5.14.8.2.1.8
The IP Address of the default gateway for this VLAN.
RFC1155-SMIIpAddressr/w
Type Constraints:
range: 4
.1.3.6.1.4.1.9.5.14.8.2.1.9
Turn Spanning tree on or off.
Enumerationr/w
Enumerated Values:
1on
2off
.1.3.6.1.4.1.9.5.14.8.2.1.10
Number of local stations (nodes) in the vlan.
RFC1155-SMIGauge
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.8.2.1.11
Aggregate of the highest number of local stations
(nodes) in the vlan calculated separately on each
box.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.2.1.12

ciscoEsVLANStpTable

table mandatory
.1.3.6.1.4.1.9.5.14.8.3 · 1 row entry · 14 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsVLANStpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsVLANStpTable'
Spanning tree information table for each vlan.
ciscoEsVLANStpEntry row .1.3.6.1.4.1.9.5.14.8.3.1
Definition of each row in the vlan specific spanning
tree information table.
Column Syntax OID
Integer reference to the vlan number in the vlan table.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.9.5.14.8.3.1.1
The value of the write-able portion of the Bridge
ID, i.e., the first two octets of the (8 octet
long) Bridge ID. The other (last) 6 octets of the
Bridge ID are given by the value of
ciscoEsVLANBaseBridgeAddress. The b…
Integer32r/w
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.5.14.8.3.1.2
The time (in hundredths of a second) since the
last time a topology change was detected by the
bridge entity.
RFC1155-SMITimeTicks
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.8.3.1.3
The total number of topology changes detected by
this vlan since the management entity was last
reset or initialized.
RFC1155-SMICounter
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.5.14.8.3.1.4
The bridge identifier of the root of the spanning
tree as determined by the Spanning Tree Protocol
as executed by this node. This value is used as
the Root Identifier parameter in all Configuration
Bridge PDUs originat…
BridgeId
Type Constraints:
range: 8
.1.3.6.1.4.1.9.5.14.8.3.1.5
The cost of the path to the root as seen from
this vlan.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.6
The port number of the port which offers the
lowest cost path from this vlan to the root
bridge.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.7
The maximum age of Spanning Tree Protocol
information learned from the network on any port
before it is discarded, in units of hundredths of
a second. This is the actual value that this
vlan is currently using.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.8
The amount of time between the transmission of
Configuration bridge PDUs by this node on any port
when it is the root of the spanning tree or trying
to become so, in units of hundredths of a second.
This is the actual v…
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.9
This time value determines the interval length
during which no more than two Configuration bridge
PDUs shall be transmitted by this vlan, in units
of hundredths of a second.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.10
This time value, measured in units of hundredths
of a second, controls how fast a port changes its
spanning state when moving towards the Forwarding
state. The value determines how long the port
stays in each of the Li…
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.3.1.11
The value that all bridges use for MaxAge when
this vlan is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
ciscoEsVLANStpBridgeHelloTime. The granularit…
Integer32r/w
Constraints:
range: 600-4000
.1.3.6.1.4.1.9.5.14.8.3.1.12
The value that all bridges use for HelloTime when
this vlan is acting as the root. The
granularity of this timer is specified by 802.1D-
1990 to be 1 second. An agent may return a
badValue error if a set is attempted …
Integer32r/w
Constraints:
range: 100-1000
.1.3.6.1.4.1.9.5.14.8.3.1.13
The value that all bridges use for ForwardDelay
when this vlan is acting as the root. Note that
802.1D-1990 specifies that the range for this
parameter is related to the value of
ciscoEsVLANStpBridgeMaxAge. The granul…
Integer32r/w
Constraints:
range: 400-3000
.1.3.6.1.4.1.9.5.14.8.3.1.14

ciscoEsVLANStationTable

table mandatory
.1.3.6.1.4.1.9.5.14.8.4 · 1 row entry · 5 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsVLANStationTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsVLANStationTable'
Stations seen in each vlan.
ciscoEsVLANStationEntry row .1.3.6.1.4.1.9.5.14.8.4.1
Definition of each row in the vlan specific
station table.
Column Syntax OID
Integer reference to the vlan number in the vlan table.
Integer32
Constraints:
range: 0-63
.1.3.6.1.4.1.9.5.14.8.4.1.1
Integer reference to the switch number on which the table entry
resides.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.8.4.1.2
The Station's MAC address.
OctetString
Constraints:
range: 6-6
.1.3.6.1.4.1.9.5.14.8.4.1.3
The source port for the Station.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.8.4.1.4
A bit string that identifies with value of one of
the ports that this station has generated traffic
to or from. Each octet within the value of this object
specifies a set of eight ports, with the first octet
specifyin…
OctetString
Constraints:
range: 4-4
.1.3.6.1.4.1.9.5.14.8.4.1.5

ciscoEsOptVLANStaTable

table mandatory
.1.3.6.1.4.1.9.5.14.8.5 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsOptVLANStaTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsOptVLANStaTable'
A table of station addresses known at an
individual port.  This table is designed to reduce
the number of SNMP GETNEXT requests.  This is done
by packing many values into an octet string.  (The
maximum size frame should be used to return the
result.) The instance returned for a GETNEXT is
the value that identifies the last 'row' in the
octet string.  When the table is completely
retrieved with one or more GETNEXTs, duplicate
entries may be present, and entries may be skipped
if the table is changing while being retrieved.
ciscoEsOptVLANStaEntry row .1.3.6.1.4.1.9.5.14.8.5.1
Definition of the rows in the optimized port
station address table. Rows can not be created or
deleted via SNMP requests.
Column Syntax OID
Third index for items in the optimized port
station address table.
Integer32
Constraints:
range: 0-65535
.1.3.6.1.4.1.9.5.14.8.5.1.1
An OCTET STRING containing a multiple number of
stations from the vlan station address table. Each entry
is encoded in the following format:
Station MAC address - 6 octets
Port of Entry - 1 octet
Traffic Mask …
OctetString .1.3.6.1.4.1.9.5.14.8.5.1.2

ciscoEsRouterTable

table mandatory
.1.3.6.1.4.1.9.5.14.9.1 · 1 row entry · 6 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ciscoEsRouterTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ES-STACK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ES-STACK-MIB::ciscoEsRouterTable'
Router Port information.
ciscoEsRouterEntry row .1.3.6.1.4.1.9.5.14.9.1.1
Definition of each row in the Router Table
Column Syntax OID
Index into the router table row.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.9.5.14.9.1.1.1
Index into the router table column.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.9.1.1.2
GET request returns up (1) down(2) for operation state.
Enumeration
Enumerated Values:
1up
2down
3empty
4unknown
.1.3.6.1.4.1.9.5.14.9.1.1.3
The IP address of the router.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.9.5.14.9.1.1.4
The Board Id of the router.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.9.1.1.5
The Board Rev of the router.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.9.5.14.9.1.1.6