CISCO-ENTITY-EXT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
5
Rows
5
Columns
20
.1.3.6.1.4.1.9.9.195.1.1 · 1 row entry · 9 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ceExtPhysicalProcessorTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-EXT-MIB::ceExtPhysicalProcessorTable'
The ceExtPhysicalProcessorTable extends
the ENTITY-MIB entPhysicalTable for modules
(Non FRUs(Field Replacable Units) or FRUs).
ceExtPhysicalProcessorEntry row .1.3.6.1.4.1.9.9.195.1.1.1
A ceExtPhysicalProcessorTable entry extends
a corresponding entPhysicalTable entry of class
module(entPhysicalClass = 'module').

A processor module or line card which
has a processor will have an entry in
Column Syntax OID
Total number of bytes of RAM available on the
Processor.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.1
Total number of bytes of NVRAM in the entity.

A value of 0 for this object means the entity
does not support NVRAM or NVRAM information
is not available.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.2
Number of bytes of NVRAM in use. This object
is irrelevant if ceExtNVRAMSize is 0.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.3
This object represents the upper 32-bit of ceExtProcessorRam.
This object needs to be supported only if the available RAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.4
This object represents the total number of bytes of RAM
available on the Processor. This object is a 64-bit version
of ceExtProcessorRam.
bytesCISCO-TCUnsigned64 .1.3.6.1.4.1.9.9.195.1.1.1.5
This object represents the upper 32-bit of ceExtNVRAMSize.
This object needs to be supported only if the available NVRAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.6
This object represents the total number of bytes of NVRAM
available on the Processor. This object is a 64-bit version
of ceExtNVRAMSize.
bytesCISCO-TCUnsigned64 .1.3.6.1.4.1.9.9.195.1.1.1.7
This object represents the upper 32-bit of ceExtNVRAMUsed.
This object needs to be supported only if the used NVRAM
bytes exceeds 32-bit, otherwise this object value would be set
to 0.
bytesSNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.9.9.195.1.1.1.8
This object represents the number of bytes of NVRAM used
on the Processor. This object is a 64-bit version of
ceExtHCNVRAMUsed.
bytesCISCO-TCUnsigned64 .1.3.6.1.4.1.9.9.195.1.1.1.9
.1.3.6.1.4.1.9.9.195.1.2 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ceExtConfigRegTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-EXT-MIB::ceExtConfigRegTable'
The ceExtConfigRegTable extends
the ENTITY-MIB entPhysicalTable.
ceExtConfigRegEntry row .1.3.6.1.4.1.9.9.195.1.2.1
A ceExtConfigRegTable entry extends
a corresponding entPhysicalTable entry of class
module which has a configuration register.

Entries are created by the agent at the system power-up
or module insertion.
Column Syntax OID
The value of configuration register with which
the processor module booted.
ConfigRegisterValue
Type Constraints:
range: 2
.1.3.6.1.4.1.9.9.195.1.2.1.1
The value of configuration register in the
processor module at next reboot. Just after
the reboot this has the same value as
ceExtConfigRegister.
ConfigRegisterValuer/w
Type Constraints:
range: 2
.1.3.6.1.4.1.9.9.195.1.2.1.2
The list of system boot images which
can be used for booting.
BootImageListr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.195.1.2.1.3
The list of system kickstart images which
can be used for booting.
BootImageListr/w
Type Constraints:
range: 0..255
.1.3.6.1.4.1.9.9.195.1.2.1.4
.1.3.6.1.4.1.9.9.195.1.3 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ceExtEntityLEDTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-EXT-MIB::ceExtEntityLEDTable'
A table containing information of LED on an entity.
ceExtEntityLEDEntry row .1.3.6.1.4.1.9.9.195.1.3.1
An entry (conceptual row) in the ceExtEntityLEDTable,
containing information about an LED on an entity, identified by
entPhysicalIndex.
Column Syntax OID
The type of LED on this entity.
'status' - indicates the entity status.
'system' - indicates the overall system status.
'active' - the redundancy status of a module, for e.g.
supervisor module.
'power' - i…
Enumeration
Enumerated Values:
1status
2system
3active
4power
5battery
.1.3.6.1.4.1.9.9.195.1.3.1.1
The color of the LED.
Enumeration
Enumerated Values:
1off
2green
3amber
4red
.1.3.6.1.4.1.9.9.195.1.3.1.2
.1.3.6.1.4.1.9.9.195.1.4 · 1 row entry · 1 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ceExtEntPhysicalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-EXT-MIB::ceExtEntPhysicalTable'
This table contains additional information about
a particular physical entity.
This table augments the 'entPhysicalTable'  of
the ENTITY-MIB.
ceExtEntPhysicalEntry row .1.3.6.1.4.1.9.9.195.1.4.1
An entry (conceptual row) in the 'ceExtEntPhysicalTable',
containing additional information about a physical entity,
identified by 'entPhysicalIndex'.
Indexes
No indexes recorded
Column Syntax OID
This object represents the vendor-specific second
serial number string for the physical entity.
The first serial number string of the physical
entity is represented in the value of corresponding
instance of the 'entPh…
OctetStringr/w
Constraints:
range: 0-32
.1.3.6.1.4.1.9.9.195.1.4.1.1
.1.3.6.1.4.1.9.9.195.1.6 · 1 row entry · 4 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ceExtUSBModemTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ENTITY-EXT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ENTITY-EXT-MIB::ceExtUSBModemTable'
A table containing information of USB MODEMs on an entity.
ceExtUSBModemEntry row .1.3.6.1.4.1.9.9.195.1.6.1
An entry (conceptual row) in the ceExtUSBModemTable,
containing information about an USB MODEM on an entity,
identified by entPhysicalIndex.
Column Syntax OID
The International Mobile Equipment Identifier (IMEI) of the
USB-MODEM
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.195.1.6.1.1
The International Mobile Subscriber Identifier(IMSI) -
for a GSM USB MODEM.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.195.1.6.1.2
The Service Provider name for a USB MODEM.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.195.1.6.1.3
The signal strength of the USB MODEM.
OctetString
Constraints:
range: 0-64
.1.3.6.1.4.1.9.9.195.1.6.1.4