CISCO-ENTITY-DIAG-MIB Table View

This table describes the tests supported by each physical
entity supporting online diagnostics.  The table
organizes tests into sets associated with the physical entity
supporting those tests.
          
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
          
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
          
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image).

ceDiagTestInfoEntry row .1.3.6.1.4.1.9.9.350.1.1.1.1

The description of a single test supported by a corresponding
physical entity.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagTestId

Column	Syntax	OID
ceDiagTestId This object indicates an arbitrary positive integer arbitrarily identifying the test.	CISCO-ENTITY-DIAG-TC-MIBCeDiagTestIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.350.1.1.1.1.1
ceDiagTestText This object indicates a human-readable description of the test. Examples include: 'Marching Pattern DRAM Test' 'Data Pins DRAM Test' 'Internal Loopback Test' …	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.1.1.1.2
ceDiagTestAttributes This object indicates a set of attributes characterizing the test: 'minimal' - indicates that this test will be executed during boot-up if ceDiagBootupLevel is set …	Bits Enumerated Values: 0 minimal 1 complete 2 perPort 3 fatal 4 basicOnDemand 5 standby 6 parallel 7 nonDisruptive 8 hmAlwaysEnable 9 hmFixedInterval 10 nonHM 11 proxy 12 activeToStandby 13 offline 14 perDevice 15 disruptive	.1.3.6.1.4.1.9.9.350.1.1.1.1.3

This table describes the additional custom based attributes
of the tests listed in ceDiagTestInfoTable. These are attributes
which have been customized by the platform supporting the tests.

ceDiagTestCustomAttributeEntry row .1.3.6.1.4.1.9.9.350.1.1.2.1

The description of a single custom based attribute for a test
supported by a corresponding physical entity.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagTestId ceDiagTestCustomAttributeIndex

Column	Syntax	OID
ceDiagTestCustomAttributeIndex An arbitrary integer which identifies the custom based attribute of a test.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.1.2.1.1
ceDiagTestCustomAttributeDesc This object provides a textual description of the custom based attribute of this test.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.1.2.1.2

This table describes the errors indicated by a system
supporting online diagnostics.

ceDiagErrorInfoEntry row .1.3.6.1.4.1.9.9.350.1.1.3.1

The description of a single online error.

Indexes

ceDiagErrorId

Column	Syntax	OID
ceDiagErrorId This object indicates an arbitrary positive integer arbitrarily identifying the error.	CISCO-ENTITY-DIAG-TC-MIBCeDiagErrorIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.350.1.1.3.1.1
ceDiagErrorText This object indicates a human-readable description of the error. Examples include: 'DIAG_SUCCESS' 'DIAG_FAILURE' 'DIAG_NOT_SUPPORT' 'DIAG_SKIPPED'	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.1.3.1.2

This table supports online diagnostic control and
status for each physical entity that supporting the feature.
          
The SNMP entity adds a conceptual row to this table
corresponding to a physical entity upon detection of a physical
entity supporting online diagnostics.
          
The SNMP entity deletes a conceptual row from this table
corresponding to a physical entity upon removal of the physical
entity.

ceDiagEntityEntry row .1.3.6.1.4.1.9.9.350.1.3.1.1

Online diagnostic control and status for a single
physical entity supporting the feature. Observe that this data
may not be accurate if the corresponding cefcModuleOperStatus
(see the CISCO-ENTITY-FRU-CONTROL-MIB for f…

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
ceDiagEntityBootLevel This object indicates the level that the physical entity executed its boot-up diagnostic.	CISCO-ENTITY-DIAG-TC-MIBCeDiagDiagnosticLevel Type Values: 1 bypass 2 minimal 3 complete	.1.3.6.1.4.1.9.9.350.1.3.1.1.1
ceDiagEntityImageAdminStatus This object specifies the desired image the physical entity should be running: 'operational' - the physical entity should be running the operational image. 'fieldDia…	Enumerationr/w Enumerated Values: 1 operational 2 fieldDiagnostic	.1.3.6.1.4.1.9.9.350.1.3.1.1.2
ceDiagEntityImageOperStatus This object indicates the actual image the physical entity is running: 'operational' - the physical entity is running the operational image. 'fieldDiagnostic' - the …	Enumeration Enumerated Values: 1 operational 2 fieldDiagnostic 3 booting	.1.3.6.1.4.1.9.9.350.1.3.1.1.3
ceDiagEntityFieldDiagnosticUrl This object specifies a URL (see RFC-1630) that specifies the location of the field diagnostic image. The following list provides some examples of URLs for the field diagnostic: file://disk0:/images/fd00…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.3.1.1.4

This table contains the information about the current test
executing on a physical entity.

ceDiagEntityCurrentTestEntry row .1.3.6.1.4.1.9.9.350.1.3.2.1

A test which is currently executing on a particular physical
entity.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagTestId

Column	Syntax	OID
ceDiagEntityCurrentTestMethod This object indicates the method used to invoke the diagnostic that is executing this test.	CISCO-ENTITY-DIAG-TC-MIBCeDiagDiagnosticMethod Type Values: 1 bootup 2 onDemand 3 scheduled 4 healthMonitor 5 none	.1.3.6.1.4.1.9.9.350.1.3.2.1.1

This table contains a list of on demand jobs currently in the
system.
          
A row in this table can be created by setting the corresponding
instance of ceDiagOnDemandJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagOnDemandJobRowStatus to 'destroy'.  Once the job is
completed the corresponding row is deleted from the table.
          
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable.

ceDiagOnDemandJobEntry row .1.3.6.1.4.1.9.9.350.1.4.4.1

A on demand job currently executing on a particular physical
entity which supports on demand diagnostics.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
ceDiagOnDemandJobSuite This object indicates the various system predefined test suites the on demand job can choose from. If the value of this object is 'none', this job will run the tests specified by ceDiagOnDemandJobTestLis…	CISCO-ENTITY-DIAG-TC-MIBCeDiagJobSuiter/w Type Values: 1 none 2 complete 3 minimal 4 nonDisruptive 5 perPort	.1.3.6.1.4.1.9.9.350.1.4.4.1.1
ceDiagOnDemandJobTestList This object specifies the user specified diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supported by this physical entity are specified in ce…	CISCO-ENTITY-DIAG-TC-MIBCeDiagTestListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.350.1.4.4.1.2
ceDiagOnDemandJobPortList This object specifies the list of ports to be exercised by the corresponding physical entity when executing the diagnostic suite specified for the job.	CISCO-ENTITY-DIAG-TC-MIBCeDiagPortListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.350.1.4.4.1.3
ceDiagOnDemandJobRowStatus The status object used to manage the rows in this table. When set to active(1) the on demand job is submitted. When set to destroy(6) the on demand job is stopped. When the value of this object is 'active', values withi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.350.1.4.4.1.4

This table contains a list of scheduled jobs on the system.
A row in this table can be created by setting the corresponding
instance of ceDiagScheduledJobRowStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagScheduledJobRowStatus to 'destroy'.  Once the job is
completed the corresponding row is deleted from the table.
The individual results of the tests executed by this job are
updated in ceDiagTestPerfTable.

ceDiagScheduledJobEntry row .1.3.6.1.4.1.9.9.350.1.5.1.1

A job currently scheduled on a particular physical
entity.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagScheduledJobIndex

Column	Syntax	OID
ceDiagScheduledJobIndex An arbitrary non-zero integer value that uniquely identifies a single scheduled job with respect to a physical entity.	CISCO-ENTITY-DIAG-TC-MIBCeDiagJobIdentifier Type Constraints: range: 1..4294967295	.1.3.6.1.4.1.9.9.350.1.5.1.1.1
ceDiagScheduledJobType This object specifies the type of the scheduled job. 'scheduledOneShot' - the physical entity will invoke this job at the time specified by c…	Enumerationr/w Enumerated Values: 1 scheduledOneShot 2 scheduledPeriodicDaily 3 scheduledPeriodicWeekly	.1.3.6.1.4.1.9.9.350.1.5.1.1.2
ceDiagScheduledJobStart This object specifies when a scheduled job will be executed. If the value of ceDiagScheduledJobType is 'scheduledOneShot', then this object only applies to the first execution of the job. I…	SNMPv2-TCDateAndTimer/w Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.5.1.1.3
ceDiagScheduledJobDayOfWeek This object specifies the day of the week for a weekly periodic scheduled job. The value of of this object must be specified if the value of ceDiagScheduledJobType is 'scheduledPeriodicWeekly'. This val…	Enumerationr/w Enumerated Values: 1 sunday 2 monday 3 tuesday 4 wednesday 5 thursday 6 friday 7 saturday 8 notApplicable	.1.3.6.1.4.1.9.9.350.1.5.1.1.4
ceDiagScheduledJobTestList This object specifies the diagnostic suite (i.e., a set of tests) to be executed by the corresponding physical entity. The set of tests supported by this physical entity are specified in ceDiagTestInfoTab…	CISCO-ENTITY-DIAG-TC-MIBCeDiagTestListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.350.1.5.1.1.5
ceDiagScheduledJobPortList This object specifies the list of ports to be tested by the corresponding physical entity when executing the diagnostic suite specified for the job.	CISCO-ENTITY-DIAG-TC-MIBCeDiagPortListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.350.1.5.1.1.6
ceDiagScheduledJobRowStatus The status object used to manage the rows in this table. When set to 'active' the scheduled job is submitted. When set to destroy(6) the scheduled job is cleared. When the value of this object is 'active', values within…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.350.1.5.1.1.7
ceDiagScheduledJobSuite This object indicates the various system predefined test suites the on scheduled job can choose from. If the value of this object is 'none', this job will run the tests specified by ceDiagScheduledJobTes…	CISCO-ENTITY-DIAG-TC-MIBCeDiagJobSuiter/w Type Values: 1 none 2 complete 3 minimal 4 nonDisruptive 5 perPort	.1.3.6.1.4.1.9.9.350.1.5.1.1.8

This table maintains data concerning the performance of tests
executed by each physical entity supporting the online
diagnostic feature.  The table organizes tests into sets
associated with the physical entity supporting those tests.
          
The SNMP entity adds a set of tests corresponding to a physical
entity upon detection of a physical entity supporting
online diagnostics.
          
The SNMP entity deletes a set of tests corresponding to a
physical entity upon removal of the physical entity.
          
The SNMP entity replaces a set of tests corresponding to a
physical entity when the physical entity has been successfully
loaded with a different image (e.g., the field diagnostic
image).

ceDiagTestPerfEntry row .1.3.6.1.4.1.9.9.350.1.6.1.1

Data concerning the performance of a single test.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagTestId

Column	Syntax	OID
ceDiagTestPerfLastResult This object indicates the result the last time this test was executed by the corresponding physical entity: 'unknown' - the corresponding physical entity has not executed the test. …	Enumeration Enumerated Values: 1 unknown 2 fail 3 pass 4 skipped	.1.3.6.1.4.1.9.9.350.1.6.1.1.1
ceDiagTestPerfLastErrorID This object indicates the last error code of this test. Details of the non-zero error code can be found in the corresponding entry in ceDiagErrorInfoTable.	CISCO-ENTITY-DIAG-TC-MIBCeDiagErrorIdentifierOrZero Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.6.1.1.2
ceDiagTestPerfLastRun This object indicates the last time the corresponding physical entity executed this test. If the value of ceDiagTestPerfLastResult is 'unknown', then the value of this object is irrelevant.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.6.1.1.3
ceDiagTestPerfFirstFail This object indicates the first time the corresponding physical entity executed this test and it failed. The value of this object is irrelevant if the value of ceDiagTestPerfTotalFails is 0.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.6.1.1.4
ceDiagTestPerfLastSuccess This object indicates the last time the corresponding physical entity executed this test and it passed. The value 0x0000010100000000 indicates that the corresponding physical entity has not passed this test yet.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.6.1.1.5
ceDiagTestPeffLastFail This object indicates the last time the corresponding physical entity executed this test and it failed. If the value of ceDiagTestPerfTotalFails is 0, then the value of this object is irrelevant.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.6.1.1.6
ceDiagTestPerfTotalRuns This object indicates the total number of times the corresponding physical entity has executed the test.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.6.1.1.7
ceDiagTestPerfTotalFails This object indicates the total number of times the corresponding physical entity has executed the test and the test resulted with a failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.6.1.1.8
ceDiagTestPerfConsecutiveFails This object indicates the consecutive number of times the corresponding physical entity has executed the test and it has failed. The value of this object will be reset to '0' when the physical entity executes the test …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.6.1.1.9
ceDiagTestPerfLastTestMethod This object indicates the testing method used for the last time this test was executed by the corresponding physical entity.	CISCO-ENTITY-DIAG-TC-MIBCeDiagDiagnosticMethod Type Values: 1 bootup 2 onDemand 3 scheduled 4 healthMonitor 5 none	.1.3.6.1.4.1.9.9.350.1.6.1.1.10

This table describes attributes specific to the health monitor
for tests supported by a physical entity.

ceDiagHMTestEntry row .1.3.6.1.4.1.9.9.350.1.7.2.1

The attributes of a single test specific to the health
monitor.

Indexes

ENTITY-MIBentPhysicalIndex ceDiagTestId

Column	Syntax	OID
ceDiagHMTestEnabled This object specifies whether this test is enabled for health monitor.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.350.1.7.2.1.1
ceDiagHMTestIntervalMin This object indicates the minimum interval which the health monitor can periodically invoke this test.	millisecondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.2
ceDiagHMTestIntervalDefault This object indicates the default interval which the health monitor will periodically invoke this test. A value of '0' indicates that the health monitor will not invoke the test.	millisecondsUnsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.3
ceDiagHMTestInterval This object specifies the interval at which the health monitor periodically invokes this test. A value of '0' indicates that the health monitor will not invoke the test. A value of '0' cannot be set.	millisecondsUnsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.4
ceDiagHMTestThresholdDefault This object indicates the default consecutive failure count threshold. When the specified failure count threshold is reached, the diagnostic test result is set to failure. A value of '0' indicates that the health moni…	Unsigned32 Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.5
ceDiagHMTestThreshold This object specifies the consecutive failure count threshold for this test. When the specified failure count threshold is reached, the diagnostic test result is set to failure. A value of '0' indicates …	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.6
ceDiagHMTestThreshWindowSuite This object specifies a sliding history window parameter which is used in combination with ceDiagHMTestThreshold. When the specified failure count threshold is reached in this sliding history window, the diagnostic te…	Enumerationr/w Enumerated Values: 1 default 2 milliseconds 3 seconds 4 minutes 5 hours 6 days 7 runs	.1.3.6.1.4.1.9.9.350.1.7.2.1.7
ceDiagHMTestThreshWindowSize This object indicates the sliding history window size. When the value of ceDiagHMTestThreshWindowSuite is 'default', the user cannot set any value for this object. The value of zero (0) can…	Unsigned32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.9.350.1.7.2.1.8

A control table used to query the event log buffer. Each row
instance in the table represents a query with its parameters.
The resulting data for each instance of a query in this table
is stored in the ceDiagEventResultTable.
          
A row in this table can be created by setting the corresponding
instance of ceDiagEventQueryStatus to 'createAndGo'.
A row can be deleted by setting the corresponding instance of
ceDiagEventQueryStatus to 'destroy'.

ceDiagEventQueryEntry row .1.3.6.1.4.1.9.9.350.1.8.4.1

A conceptual row of the ceDiagEventQueryTable used to setup
a event log buffer query to search for diagnostic events.
The actual search is started by when the value of
ceDiagEventQueryStatus is set to 'active'.

Indexes

ceDiagEventQueryIndex

Column	Syntax	OID
ceDiagEventQueryIndex An arbitrary integer in the range of 1 to ceDiagEventMaxQueries to identify this control query.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.8.4.1.1
ceDiagEventQueryPhysicalIndex This object specifies the physical entity for the event log buffer query. A value of zero indicates that the query will return events of all physical entities.	CISCO-TCEntPhysicalIndexOrZeror/w Type Constraints: range: 0..2147483647	.1.3.6.1.4.1.9.9.350.1.8.4.1.2
ceDiagEventQuerySeverity This object specifies the severity of the event log buffer query. A value of 'all' indicates that the search will return events of all severities.	Enumerationr/w Enumerated Values: 0 all 1 info 2 warning 3 error	.1.3.6.1.4.1.9.9.350.1.8.4.1.3
ceDiagEventQueryOwner The manager entity that configured this entry and is therefore using the resources assigned to it. It is used to model an administratively assigned name of the owner of a resource. It is recommended that this object ha…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.8.4.1.4
ceDiagEventQueryResultingRows The result status of the query. Possible values are: -1 - Either the query has not been initiated or the agent is busy processing this query instance. Time to c…	Integer32 Constraints: range: -1-2147483647	.1.3.6.1.4.1.9.9.350.1.8.4.1.5
ceDiagEventQueryStatus The status object used to manage rows in this table. When set to 'active', the query to search for diagnostic events is initiated. Once a row becomes active, values within the row cannot be modified, except by deleting…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.350.1.8.4.1.6

A table containing event log information corresponding
to all the completed queries set up in ceDiagEventQueryTable.
The query result will not become available until the current
search is completed.

ceDiagEventResultEntry row .1.3.6.1.4.1.9.9.350.1.8.5.1

A conceptual row in ceDiagEventResultTable, containing
information about an event that matches the search criteria
set in the corresponding row of ceDiagEventQueryTable.

Indexes

ceDiagEventQueryIndex ceDiagEventResultIndex

Column	Syntax	OID
ceDiagEventResultIndex A positive integer which uniquely identifies a result entry matching a particular query.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.350.1.8.5.1.1
ceDiagEventResultPhysicalIndex This object specifies the physical entity corresponding to this event.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.350.1.8.5.1.2
ceDiagEventResultPhysicalDescr This object specifies a textual description of physical entity corresponding to this event.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.8.5.1.3
ceDiagEventResultTime This object specifies the time at which this event occurred.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.9.9.350.1.8.5.1.4
ceDiagEventResultSeverity This object indicates the severity of this event.	Enumeration Enumerated Values: 1 info 2 warning 3 error	.1.3.6.1.4.1.9.9.350.1.8.5.1.5
ceDiagEventResultLogText The text message of this event.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.350.1.8.5.1.6