CISCO-ENTITY-ALARM-MIB Table View

For each type of entity (represented entPhysicalVendorType
OID), this table contains a mapping between a unique 
ceAlarmDescrIndex and entPhysicalvendorType OID.

ceAlarmDescrMapEntry row .1.3.6.1.4.1.9.9.138.1.1.1.1

A mapping between an alarm description and a vendor type.

Indexes

ceAlarmDescrIndex

Column	Syntax	OID
ceAlarmDescrIndex This object uniquely identifies an alarm description.	CISCO-TCUnsigned32	.1.3.6.1.4.1.9.9.138.1.1.1.1.1
ceAlarmDescrVendorType This object specifies an object identifier (typically an enterprise-specific OID) that uniquely identifies the vendor type of those physical entities that this alarm description applies to.	SNMPv2-TCAutonomousType Description: Represents an independently extensible type identification value. It may, for example, indicate a particular sub-tree with further MIB definitions, or define a particular type of protocol or hardware.	.1.3.6.1.4.1.9.9.138.1.1.1.1.2

This table contains a description for each alarm type
defined by each vendor type employed by the system.
Observe that this table is sparse in nature, as it is
rarely the case that a physical entity type needs to 
define every alarm in its alarm space.

ceAlarmDescrEntry row .1.3.6.1.4.1.9.9.138.1.1.2.1

A collection of attributes that describe an alarm type.

Indexes

ceAlarmDescrIndex ceAlarmDescrAlarmType

Column	Syntax	OID
ceAlarmDescrAlarmType This object specifies the alarm type being described.	AlarmType Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.138.1.1.2.1.1
ceAlarmDescrSeverity This object specifies the severity associated with the alarm type. An implementation may chose to not allow dynamic severity assignment, in which case it would restrict access to this object to be read-on…	AlarmSeverityOrZeror/w Type Constraints: range: 0..4	.1.3.6.1.4.1.9.9.138.1.1.2.1.2
ceAlarmDescrText This object specifies a human-readable message describing the alarm.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.138.1.1.2.1.3

This table specifies alarm control and status information
related to each physical entity contained by the system,
including the alarms currently being asserted by each physical
entity capable of generating alarms.

ceAlarmEntry row .1.3.6.1.4.1.9.9.138.1.2.5.1

Alarm control and status information related to the
corresponding physical entity, including a list of those
alarms currently being asserted by that physical entity.

Indexes

ENTITY-MIBentPhysicalIndex

Column	Syntax	OID
ceAlarmFilterProfile This object specifies the alarm filter profile associated with the corresponding physical entity. An alarm filter profile controls which alarm types the agent will monitor and signal for the corresponding physical enti…	AlarmFilterProfileTyper/w	.1.3.6.1.4.1.9.9.138.1.2.5.1.1
ceAlarmSeverity This object specifies the highest severity alarm currently being asserted by the corresponding physical entity. A value of '0' indicates that there the corresponding physical entity currently is not asserting any alarm…	AlarmSeverityOrZero Type Constraints: range: 0..4	.1.3.6.1.4.1.9.9.138.1.2.5.1.2
ceAlarmList This object specifies those alarms currently being asserted by the corresponding physical entity. Note, an alarm indicates a condition, not an event. An alarm has two states: 'asserted' Indicates t…	AlarmList Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.138.1.2.5.1.3

This table contains a history of ceAlarmIndicate and
ceAlarmClear traps generated by the agent.

ceAlarmHistEntry row .1.3.6.1.4.1.9.9.138.1.3.3.1

The information conveyed by a ceAlarmIndicate or
ceAlarmClear trap.

Indexes

ceAlarmHistIndex

Column	Syntax	OID
ceAlarmHistIndex An integer value uniquely identifying the entry in the table. The value of this object starts at '1' and monotonically increases for each alarm condition transition monitored by the agent. If the value of this object i…	CISCO-TCUnsigned32	.1.3.6.1.4.1.9.9.138.1.3.3.1.1
ceAlarmHistType This object specifies whether the agent created the entry as the result of an alarm being asserted or cleared.	Enumeration Enumerated Values: 1 asserted 2 cleared	.1.3.6.1.4.1.9.9.138.1.3.3.1.2
ceAlarmHistEntPhysicalIndex This object specifies the physical entity that generated the alarm.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.4.1.9.9.138.1.3.3.1.3
ceAlarmHistAlarmType This object specifies the type of alarm generated.	AlarmType Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.138.1.3.3.1.4
ceAlarmHistSeverity This object specifies the severity of the alarm generated.	AlarmSeverity Type Values: 1 critical 2 major 3 minor 4 info	.1.3.6.1.4.1.9.9.138.1.3.3.1.5
ceAlarmHistTimeStamp This object specifies the value of the sysUpTime object at the time the alarm was generated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.138.1.3.3.1.6

This table contains a list of alarm filter profiles.

ceAlarmFilterProfileEntry row .1.3.6.1.4.1.9.9.138.1.4.4.1

When a physical entity asserts/clears an alarm AND the
ceAlarmFilterProfile object is not '0', the agent applies
the specified alarm filter profile in processing the alarm.
The agent uses the following procedure in proc…

Indexes

ceAlarmFilterIndex

Column	Syntax	OID
ceAlarmFilterIndex This object uniquely identifies the alarm filter profile.	AlarmFilterProfileType	.1.3.6.1.4.1.9.9.138.1.4.4.1.1
ceAlarmFilterStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table. A management client can create a conceptual row in this table by setting this object to 'createAndWait' …	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.138.1.4.4.1.2
ceAlarmFilterAlias This object specifies an arbitrary name associated with the alarm filter profile by the management client, and provides a non-volatile 'handle' for the alarm filter profile. On the first instantiation of …	SNMPv2-TCDisplayStringr/w Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.9.9.138.1.4.4.1.3
ceAlarmFilterAlarmsEnabled This object specifies a list of alarms that are enabled.	AlarmListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.138.1.4.4.1.4
ceAlarmFilterNotifiesEnabled This object specifies a list of alarms for which notification generation is enabled.	AlarmListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.138.1.4.4.1.5
ceAlarmFilterSyslogEnabled This object specifies a list of alarms for which syslog message generation is enabled.	AlarmListr/w Type Constraints: range: 0..32	.1.3.6.1.4.1.9.9.138.1.4.4.1.6