CISCO-DSL-PROVISION-MIB Table View

This table reflects the IP addresses of each NRP
in the system.

cdslNrpIpAddressEntry row .1.3.6.1.4.1.9.10.30.1.1.3.1

These entries are used to store the IP Addresses of
NRP cards that are inserted in the indexed slot.
The IP addresses are used to access these cards.

Indexes

cdslNrpSlotIndex

Column	Syntax	OID
cdslNrpSlotIndex The object specifies the identifier of a slot containing a NRP.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.30.1.1.3.1.1
cdslNrpIpAddress The object specifies the IP addresses associated with the NRP contained in the slot identified by cdslNrpSlotIndex.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.30.1.1.3.1.2

This table reflects the number of virtual template
that are presently set up in each NRP.
          
A virtual template interface is a logical entity 
a configuration for a serial-interface but not tied to a 
physical interface - thatcan be applied dynamically as needed.

cdslVirtualTemplateNumberEntry row .1.3.6.1.4.1.9.10.30.1.2.1.1

Entries are read only.

Indexes

cdslNrpSlotIndex

Column	Syntax	OID
cdslMaxVirtualTemplates The object specifies the maximum number of virtual templates allowed in one single NRP.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.2.1.1.1
cdslVirtualTemplates This object indicates the number of virtual templates presently set up in each NRP identified by cdslNrpSlotIndex.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.2.1.1.2

This table includes the virtual templates in the NRP
identified by cNrpSlotIndex.
          
Though a virtual template is often called a virtual 
template interface, it is not reflected in the ifTable.

cdslVirtualTemplateEntry row .1.3.6.1.4.1.9.10.30.1.2.2.1

User may create a new entry or delete an existing
entry.

Entries may be created without explicitly setting
cdslVTRowStatus.

While the row status is 'active', objects having
read-create access…

Indexes

cdslNrpSlotIndex cdslVTIndex

Column	Syntax	OID
cdslVTIndex This object represents an arbitrary index used to identify the virtual template entry.	Integer32 Constraints: range: 1-2147483647	.1.3.6.1.4.1.9.10.30.1.2.2.1.1
cdslVTIpAddressMethod This object indicates how an IP address is obtained to be associated with this virtual template. The actual parameters of these methods are indicated by the objects defined after. none -- means n…	Enumerationr/w Enumerated Values: 0 none 1 ipAddress 2 interfaceIp 3 negotiate	.1.3.6.1.4.1.9.10.30.1.2.2.1.2
cdslVTIpAddress This object specifies the IP address associated with this virtual template entry. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be se…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.10.30.1.2.2.1.3
cdslVTIpAddressMask This object specifies the IP address mask. This object is only valid when cdslVTIpAddressMethod is 'ipAddress'. To set the value correctly, this object shall be set in the same packet as cdslVTIpAddress…	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.10.30.1.2.2.1.4
cdslVTIpIfIndex This object specifies the ifIndex of the interface, whose IP address will be used for the virtual template entry. Any interface with an IP address in the routing processor can be selected. This object i…	IF-MIBInterfaceIndexOrZeror/w Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.10.30.1.2.2.1.5
cdslVTPeerIpAddressMethod This object indicates how an IP address is obtained when a peer requesting one. The actual parameters of these methods are indicated by the objects defined after. none -- means no IP address associa…	Enumerationr/w Enumerated Values: 0 none 1 negotiate 2 ipAddressPool	.1.3.6.1.4.1.9.10.30.1.2.2.1.6
cdslVTPeerIpAddrPool This object is used to specify peer default local IP address pool name. This object is only valid when cdslVTPeerIpAddressMethod is 'ipAddressPool'. To set the value correctly, this object shall be set i…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.2.2.1.7
cdslVTPppAuthChap This object is used to specify to use Challenge Handshake Authentication Protocol (CHAP) authentication method and the order it is used. The value zero indicates that CHAP is not used. See…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.30.1.2.2.1.8
cdslVTPppAuthMSChap This object is used to specify the use of Microsoft's CHAP (MSCHAP) authentication method and the order it is used. The value zero indicates that MSCHAP is not used. See the description of …	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.30.1.2.2.1.9
cdslVTPppAuthPap This object is used to specify whether to use Password Authentication Protocol (PAP) authentication method and the order it is used. This object is one of multiple objects used to specify authentication…	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.30.1.2.2.1.10
cdslVTPppChapHost This object is used to specify the PPP CHAP host name.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.2.2.1.11
cdslVTPppChapPassword This object is used to specify the PPP CHAP password.	OctetStringr/w Constraints: range: 0-25	.1.3.6.1.4.1.9.10.30.1.2.2.1.12
cdslVTPppChapEncrypType This object is used to specify whether to encrypt the PPP CHAP password. Only effective when cdslVTPppChapPassword is non-empty.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.2.2.1.13
cdslVTPppChapRefuse The object is used to refuse CHAP authentication from peers requesting it. To disable this function set the value to no. RefuseCallinOnly indicating the system to refuse to answer CHAP …	Enumerationr/w Enumerated Values: 1 no 2 refuse 3 refuseCallinOnly	.1.3.6.1.4.1.9.10.30.1.2.2.1.14
cdslVTPppChapWaitPeer This object is used to specify that the system will not authenticate to a peer requesting CHAP authentication until after the peer has authenticated to this system. To disable this function, set this obj…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.2.2.1.15
cdslVTPppPapUserName This object is used to specify the PPP PAP user name that will be sent to a peer device. Please refer to the description of cdslVTPppPassword to see the interaction.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.2.2.1.16
cdslVTPppPapPassword This object is used to specify the PPP PAP authentication password. The system only utilizes the user name and password when both cdslVTPppUserName and cdslVTPppPassword are non-empty strings. To enfo…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.2.2.1.17
cdslVTPppPapEncrypType This object is used to specify whether to encrypt the PAP password. Only effective when cdslVTPppPapPassword is non-empty.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.2.2.1.18
cdslVTPppUseTacacs This object is used to specify whether to enable TACACS for PPP authentication. SingleLine means yes and plus to accept username and password in the username field that is in single line.	Enumerationr/w Enumerated Values: 1 no 2 yes 3 singleLine	.1.3.6.1.4.1.9.10.30.1.2.2.1.19
cdslVTRowStatus This object is used to create a new row or modify or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.30.1.2.2.1.20

This table indicates the number of IP address pools
that are presently set up in each NRP.

cdslLocalIpAddrPoolNumberEntry row .1.3.6.1.4.1.9.10.30.1.3.1.1

Entries are read only.

Indexes

cdslNrpSlotIndex

Column	Syntax	OID
cdslMaxLocalIpAddrPools Maximum number of local IP address pools allowed in a NRP.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.3.1.1.1
cdslLocalIpAddrPools The number of local IP address pools presently set up.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.3.1.1.2

This table defines the IP local address pool.
          
An IP address pool may have a single entry in 
the table. The ranges of a pool are represented
in the cdslLocalIPAddrRangeTable.

cdslLocalIpAddrPoolEntry row .1.3.6.1.4.1.9.10.30.1.3.2.1

This list contains IP pool entry.

The entry is read-only. The creation or the deletion
of an entry will be a by-product of the entry in the
cdslLocalIPAddrRangeTable. When an entry is created
and activate…

Indexes

cdslNrpSlotIndex cdslLocalIpAddrPoolName

Column	Syntax	OID
cdslLocalIpAddrPoolName A unique and non-empty string for the pool. The name can not be modified once created.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.10.30.1.3.2.1.1
cdslLocalIpAddrPoolFreeAddresses The number of IP addresses still available for use in the pool. Please notice that the number is for the whole pool, not for the individual range.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.3.2.1.2
cdslLocalIpAddrPoolInUseAddresses The number of addresses currently in use in the pool. Please notice that the number is for the whole pool, not for the individual range.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.3.2.1.3

This table defines the IP local address pool ranges.
          
An IP address pool may have a single entry or multiple 
entries in the table, since an IP address pool can have 
multiple dis-continuous ranges. Each range will have 
a separate entry in the table.

cdslLocalIpAddrRangeEntry row .1.3.6.1.4.1.9.10.30.1.3.3.1

This list contains IP pool range entry.

User may create a new entry or delete an existing entry.

When creating an entry, after its activation, an entry
in the cdslLocalIpAddrPoolTable will ex…

Indexes

cdslNrpSlotIndex cdslLocalIpAddrRangeLowAddr cdslLocalIpAddrRangeHighAddr cdslLocalIpAddrPoolName

Column	Syntax	OID
cdslLocalIpAddrRangeLowAddr The low range of this IP address pool range. This must be lower than the pool's high range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.30.1.3.3.1.1
cdslLocalIpAddrRangeHighAddr The high range of this IP address pool range. This must be higher than the pool's low range.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.9.10.30.1.3.3.1.2
cdslLocalIpAddrRangeRowStatus This object is used to create a new row or delete an existing row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.30.1.3.3.1.3

This table reflects the number of PVCs of PPP
encapsulation presently set up in each NRP.

cdslPppOverAtmPvcNumberEntry row .1.3.6.1.4.1.9.10.30.1.4.1.1

Each entry represents the responding NRP.

Indexes

cdslNrpSlotIndex

Column	Syntax	OID
cdslPppOverAtmPvcs The number of atm pvcs that are presently set up with PPP encapsulation. The number of all atm PVCs and the maximum number of PVCs are provided by AToM Mib.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.4.1.1.1

This table includes configuration parameters
for ATM PVCs with PPP encapsulation. 
          
The vc-mode ATM PVC management approach is used as 
the PVC creating method, which greatly simplifies 
configuration by using of vc-class.
          
The PVCs which were created using atm pvc cli commands 
can only be read or deleted from snmp. In case of reading,
only the values of vpi, vci, sub-interface number, 
encapsulation, virtual template number and row status 
are meaningful. When trying to set any object of these PVCs, 
a GEN_ERROR returns except for the row status object. 
To indicate a PVC is created with old pvc syntax, 
the value of cdslAtmPvcClass will be set into '!'.

cdslAtmPvcEntry row .1.3.6.1.4.1.9.10.30.1.4.2.1

The IfIndex by which the table is indexed, is the ATM
interface index in which the PVC is created.

The only object that is allowed to change the value
while the row status is 'active' is cdslAtmPvcClass.
…

Indexes

cdslNrpSlotIndex IF-MIBifIndex cdslAtmPvcVpi cdslAtmPvcVci

Column	Syntax	OID
cdslAtmPvcVpi The virtual path identifier of the PVC. Please note that it is routing processor's VPI number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.30.1.4.2.1.1
cdslAtmPvcVci The virtual channel identifier of the PVC. Please note that it is routing processor's VCI number.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.30.1.4.2.1.2
cdslAtmPvcName This object can be used to identify the PVC. Unique name for each PVC is desired if assigned.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.4.2.1.3
cdslAtmPvcSubIfNumber This object indicates the ios sub-interface number if this PVC belongs to an atm sub-interface. Once the pvc exists, the value can not be modified. If the PVC is created under the ATM int…	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.30.1.4.2.1.4
cdslAtmPvcClass This object indicates the vc-class to inherit when the named vc-class exists. If the object is to set into an empty string, the default value 'default-vc-class' will be used. If the 'default-vc-class' …	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.10.30.1.4.2.1.5
cdslAtmPvcQosType Quality of Service type of this PVC.	Enumeration Enumerated Values: 0 ubrDefault 1 cbr 2 ubr 3 ubrPlus 4 vbrRt 5 vbrNrt 6 abr 7 max	.1.3.6.1.4.1.9.10.30.1.4.2.1.6
cdslAtmPvcAbrPCR Availabe bit rate (Abr) peak cell rate(PCR) of this PVC.	kbpsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.4.2.1.7
cdslAtmPvcAbrMCR Abr Minimum Guaranteed Cell Rate(MCR) of this PVC.	kbpsUnsigned32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.30.1.4.2.1.8
cdslAtmPvcAbrIORIF Abr inverse of rate increase factor (1/rif) of this PVC.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.4.2.1.9
cdslAtmPvcAbrIORDF Abr inverse of rate decrease factor (1/rdf) of this PVC.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.4.2.1.10
cdslAtmPvcBroadcast This object indicates whether to allow broadcast or not.	Enumeration Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.4.2.1.11
cdslAtmPvcEncapsulation This object indicates encapsulation method of this PVC.	Enumeration Enumerated Values: 0 default 1 aal5snap 2 aal5mux 3 aal5nlpid 4 aal34smds 5 aal5ilmi 6 aal5qsaal 7 aal5ciscoppp	.1.3.6.1.4.1.9.10.30.1.4.2.1.12
cdslAtmPvcMuxLinkType This object can be used to This object is used to specify the link type if the encapsulation is aal5mux. 1 -- ip and 2 -- ppp.	Enumerationr/w Enumerated Values: 1 ip 2 ppp	.1.3.6.1.4.1.9.10.30.1.4.2.1.13
cdslAtmPvcVirtualTemplate The virtual template number configured for the PVC.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.30.1.4.2.1.14
cdslAtmPvcILMIManage This object indicates whether to ilmi manage or not.	Enumeration Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.4.2.1.15
cdslAtmPvcInarp This object indicates the InARP Frequency in minutes (Only meaningful in aal5snap encapsulation).	Unsigned32 Constraints: range: 1-60	.1.3.6.1.4.1.9.10.30.1.4.2.1.16
cdslAtmPvcOamRetryUpCount This object indicates the OAM retry count before declaring a VC is up.	Unsigned32 Constraints: range: 1-600	.1.3.6.1.4.1.9.10.30.1.4.2.1.17
cdslAtmPvcOamRetryDownCount This object indicates the OAM retry count before declaring a VC is down.	Unsigned32 Constraints: range: 1-600	.1.3.6.1.4.1.9.10.30.1.4.2.1.18
cdslAtmPvcOamPvcManaged This object indicates whether to enable VC management on OAM in this PVC.	Enumeration Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.4.2.1.19
cdslAtmPvcOamPvcLF This object indicates the OAM loopback frequency(seconds) for this PVC.	Unsigned32 Constraints: range: 0-600	.1.3.6.1.4.1.9.10.30.1.4.2.1.20
cdslAtmPvcProtocolIpBC Pseudo-broadcast on the protocol IP inarp connections or not (Only meaningful in aal5snap encapsulation).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.4.2.1.21
cdslAtmPvcProtocolIpxBC This object indicates whether to allow Pseudo-broadcast on the protocol IPX inarp connections or not (Only meaningful in aal5snap encapsulation).	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.4.2.1.22
cdslAtmPvcUbrPCR This object indicates the Ubr Peak Cell Rate.	kbpsUnsigned32 Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.4.2.1.23
cdslAtmPvcUbrPlusPCR This object indicates the Ubr+ Peak Cell Rate.	kbpsUnsigned32 Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.4.2.1.24
cdslAtmPvcUbrPlusMCR This object indicates the Ubr+ Minimum Guaranteed Cell Rate.	kbpsUnsigned32 Constraints: range: 0-1	.1.3.6.1.4.1.9.10.30.1.4.2.1.25
cdslAtmPvcVbrNrtPCR This object indicates the Vbr-Nrt Peak Cell Rate.	kbpsUnsigned32 Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.4.2.1.26
cdslAtmPvcVbrNrtSCR This object indicates the Vbr-Nrt Sustainable Cell Rate.	kbpsUnsigned32 Constraints: range: 1-1	.1.3.6.1.4.1.9.10.30.1.4.2.1.27
cdslAtmPvcRowStatus This object is used to create a new row or modify or delete an existing row in this table. When the row is created, but the minimun set of parameters is not all set, the status is 'notReady'. There is no…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.30.1.4.2.1.28

This table reflects the number of VC classes
that are presently set up in each NRP.

cdslVcClassNumberEntry row .1.3.6.1.4.1.9.10.30.1.5.1.1

Entries are read only.

Indexes

cdslNrpSlotIndex

Column	Syntax	OID
cdslMaxVcClasses This object indicates the maximum number of VC classes allowed.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.5.1.1.1
cdslVcClasses This object indicates the number of VC classes presently set in each NRP identified by cdslNrpSlotIndex.	Unsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.30.1.5.1.1.2

The entries in this table are vc-classes with at least
one parameter configured. In other words, empty classes 
(with name only) will not be present in this table.

cdslVcClassEntry row .1.3.6.1.4.1.9.10.30.1.5.2.1

The VC Class entry is read-create.
Each entry represents a VC class.

Indexes

cdslNrpSlotIndex cdslVcClassName

Column	Syntax	OID
cdslVcClassName This object is used to identify the vc class.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.9.10.30.1.5.2.1.1
cdslVcClassType This object indicates the type of the vc class. Atm is for Asynchronous transfer mode and funi for frame user network interface.	Enumeration Enumerated Values: 1 atm 2 funi	.1.3.6.1.4.1.9.10.30.1.5.2.1.2
cdslVcClassQosType This object specifies the QOS type of the vc class.	Enumerationr/w Enumerated Values: 0 ubrDefault 1 cbr 2 ubr 3 ubrPlus 4 vbrRt 5 vbrNrt 6 abr 7 max	.1.3.6.1.4.1.9.10.30.1.5.2.1.3
cdslVcClassAbrPCR This object specifies Abr Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 56-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.4
cdslVcClassAbrMcr This object specifies Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassAbrPCR.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.5
cdslVcClassAbrIORIF This object specifies Abr inverse of rate increase factor (1/rif) to the power of two. Note that the actual value in the system is the power of two of this object. That is, for example, a value 5 of th…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.9.10.30.1.5.2.1.6
cdslVcClassAbrIORDF Abr inverse of rate decrease factor (1/rdf) to the power of two. Note that the actual value is the power of two of this object. For example, value 5 of this object means 2**5 = 32. Range …	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.9.10.30.1.5.2.1.7
cdslVcClassBroadcast This object indicates whether to allow broadcast or not. When set the value, do not use unknown.	Enumerationr/w Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.5.2.1.8
cdslVcClassEncapsulation This object specifies encapsulation method.	Enumerationr/w Enumerated Values: 0 default 1 aal5snap 2 aal5mux 3 aal5nlpid 4 aal34smds 5 aal5ilmi 6 aal5qsaal 7 aal5ciscoppp	.1.3.6.1.4.1.9.10.30.1.5.2.1.9
cdslVcClassMuxLinkType This object is used to specify the link type if the encapsulation is aal5mux. 1 for IP and 2 for PPP.	Enumerationr/w Enumerated Values: 1 ip 2 ppp	.1.3.6.1.4.1.9.10.30.1.5.2.1.10
cdslVcClassVirtualTemplate The virtual template number. Value zero means not configured.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.30.1.5.2.1.11
cdslVcClassIdleTimeout This object specifies idle timeout.	Integer32r/w Constraints: range: 0-2000000	.1.3.6.1.4.1.9.10.30.1.5.2.1.12
cdslVcClassIdleMTR This object specifies the minimum traffic rate to keep the connection.	kbpsInteger32r/w Constraints: range: 0-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.13
cdslVcClassILMIManage This object specifies whether to allow ilmi manage or not. When set the value, do not use unknown.	Enumerationr/w Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.5.2.1.14
cdslVcClassInarp This object specifies InARP Frequency in minutes.	Integer32r/w Constraints: range: 1-60	.1.3.6.1.4.1.9.10.30.1.5.2.1.15
cdslVcClassOamRetryUpCount OAM retry count before declaring a VC is up	Integer32r/w Constraints: range: 1-600	.1.3.6.1.4.1.9.10.30.1.5.2.1.16
cdslVcClassOamRetryDownCount OAM retry count before declaring a VC is down	Integer32r/w Constraints: range: 1-600	.1.3.6.1.4.1.9.10.30.1.5.2.1.17
cdslVcClassOamPvcManaged This object specifies whether to enable VC management on OAM in a PVC. When set the value, do not use unknown.	Enumerationr/w Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.5.2.1.18
cdslVcClassOamPvcLF This object specifies the OAM loopback frequency.	secondsInteger32r/w Constraints: range: 0-600	.1.3.6.1.4.1.9.10.30.1.5.2.1.19
cdslVcClassOamSvcManaged This object specifies whether to enable VC management on OAM on SVC SVC. When set the value, do not use unknown.	Enumerationr/w Enumerated Values: 0 false 1 true 2 unknown	.1.3.6.1.4.1.9.10.30.1.5.2.1.20
cdslVcClassOamSvcLF This object specifies the OAM loopback frequency for SVC	secondsInteger32r/w Constraints: range: 0-600	.1.3.6.1.4.1.9.10.30.1.5.2.1.21
cdslVcClassProtocolIpBC This object specifies whether to allow the pseudo-broadcast on the protocol IP inarp connections or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.5.2.1.22
cdslVcClassProtocolIpxBC This object specifies whether to allow the pseudo-broadcast on the protocol IPX inarp connections or not.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.30.1.5.2.1.23
cdslVcClassTransmitPriority This object specifies the transmit priority.	Integer32r/w Constraints: range: 0-2147483647	.1.3.6.1.4.1.9.10.30.1.5.2.1.24
cdslVcClassUbrPCR This object specifies the Ubr Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.25
cdslVcClassUbrInputPCR This object specifies the Ubr Input Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.26
cdslVcClassUbrPlusPCR This object specifies the Ubr+ Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.27
cdslVcClassUbrPlusMCR This object specifies the Ubr+ Minimum Guaranteed Cell Rate. It shall be smaller than cdslVcClassUbrPlusPCR.	kbpsInteger32r/w Constraints: range: 0-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.28
cdslVcClassUbrPlusInputPCR This object specifies the Ubr+ Input Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.29
cdslVcClassUbrPlusInputMCR This object specifies the Ubr+ Input Minimum Cell Rate. It shall be smaller than cdslVcClassUbrPlusInputPCR.	kbpsInteger32r/w Constraints: range: 0-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.30
cdslVcClassVbrNrtPCR This object specifies the Vbr-Nrt Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.31
cdslVcClassVbrNrtSCR This object specifies the Vbr-Nrt Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtPCR.	kbpsInteger32r/w Constraints: range: 1-1	.1.3.6.1.4.1.9.10.30.1.5.2.1.32
cdslVcClassVbrNrtInputBP This object specifies the Vbr-Nrt Input Burst Parameter: rounded on AIP to the nearest 32, used as is on NPM.	Integer32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.9.10.30.1.5.2.1.33
cdslVcClassVbrNrtInputPCR This object specifies the Vbr-Nrt Input Peak Cell Rate.	kbpsInteger32r/w Constraints: range: 1-155000	.1.3.6.1.4.1.9.10.30.1.5.2.1.34
cdslVcClassVbrNrtInputSCR This object specifies the Vbr-Nrt Input Sustainable Cell Rate. It shall be smaller than cdslVcClassVbrNrtInputPCR.	kbpsInteger32r/w Constraints: range: 1-1	.1.3.6.1.4.1.9.10.30.1.5.2.1.35
cdslVcClassVbrNrtInputMBS This object specifies the Input Maximum Burst Size.	cellsInteger32r/w Constraints: range: 1-65536	.1.3.6.1.4.1.9.10.30.1.5.2.1.36
cdslVcClassRowStatus This object is used to create a new row or modify or delete an existing row in this table. The return value of this object is always 'active', if the row exists. To del…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.10.30.1.5.2.1.37