CISCO-DS3-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
9
Rows
9
Columns
107

cds3ConfigTable

table
.1.3.6.1.4.1.9.9.132.1.1.1 · 1 row entry · 10 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3ConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3ConfigTable' 
The DS3 Configuration table. 
The table has objects for configuring a T3/E3 line.
cds3ConfigEntry row .1.3.6.1.4.1.9.9.132.1.1.1.1
An entry in the table. There is an entry for each available
T3/E3 line, with an ifType value of 'ds3'(30).
By default, lines are disabled. 'ifAdmin' from ifTable must be
used to up the line. The objects in this table ca…
Indexes
Column Syntax OID
cds3LineType
This variable indicates the variety of DS3 C-bit
or E3 application implementing this interface.
The type of interface affects the interpretation
of the usage and error statistics. The rate of DS3
is 44.736 Mbps and E3 i…
Enumerationr/w
Enumerated Values:
1ds3cbitadm
2ds3cbitplcp
3e3g832adm
4e3g751adm
5e3g751plcp
6ds3m23adm
7ds3m23plcp
8other
9dsx3M23
10dsx3SYNTRAN
11dsx3CbitParity
12dsx3ClearChannel
13e3Framed
14e3Plcp
15ds3cbitfrmronly
16ds3m23frmronly
17e3g832frmronly
18e3g751frmronly
 .1.3.6.1.4.1.9.9.132.1.1.1.1.1
cds3LineAIScBitsCheck
When check(1) is set, then Alarm Indication Signal (AIS)
is declared when '1010...'b is found and C-Bits are all zero.
When ignore(2) is set, an AIS condition is declared when the
'1010...'b is detected irrespectiv…
Enumerationr/w
Enumerated Values:
1check
2ignore
3notApplicable
 .1.3.6.1.4.1.9.9.132.1.1.1.1.2
cds3LineRcvFEACValidation
This entry specifies the FEAC (Far End Alarm and Control) code
validation criteria. If 'fEACCodes4Of5' is specified, then a valid
FEAC code is declared if 4 of 5 codes match. When 'fEACCodes8Of10'
is specified, then a…
Enumerationr/w
Enumerated Values:
1fEACCodes4Of5
2fEACCodes8Of10
3disable
 .1.3.6.1.4.1.9.9.132.1.1.1.1.3
cds3LineOOFCriteria
This entry specifies the out of frame(OOF) decision criteria.
If 'bits3Of8' is specified then an OOF condition is declared if
at least 3 of 8 framing bits are in error. When 'bits3Of16' is
specified then OOF is declared…
Enumerationr/w
Enumerated Values:
1bits3Of8
2bits3Of16
3notApplicable
 .1.3.6.1.4.1.9.9.132.1.1.1.1.4
cds3TraceToTransmit
Transmitted G.832 Trail Trace string.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.9.132.1.1.1.1.5
cds3TraceToExpect
G.832 Trail Trace string that is expected to be received from
the other end.
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.9.9.132.1.1.1.1.6
cds3TraceAlarm
The value of this object is set to traceFailure(2) when
DS3 line receives a trace does not match the
'cds3TraceToExpect'.
Enumeration
Enumerated Values:
1noAlarm
2traceFailure
 .1.3.6.1.4.1.9.9.132.1.1.1.1.7
cds3InternalEqualizer
This variable indicates whether the internal equalizer is being
used or bypassed. Set this value depending on the line equipment
to which the receiver is attached.
Possible values are :

use(1) : Use…
Enumerationr/w
Enumerated Values:
1use
2byPass
 .1.3.6.1.4.1.9.9.132.1.1.1.1.8
cds3NearEndLineLoopbackStatus
Indicates the loopback status of the near end DS1 on this
DS3 when loopback request is indicated.

Following table lists the mapping of Bit position to
DS1 or DS3 lines and the value.

Bit P…
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.1.1.1.9
cds3FarEndLineLoopbackStatus
Indicates the loopback status of the far end DS3,DS1
when remote DS1 loopback request is initiated.
The remote DS1 loopback is initiated by setting dsx3SendCode
object to dsx3SendDS1LoopCode(5).
For unchannelized DS3 …
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.1.1.1.10

cds3AlarmConfigTable

table
.1.3.6.1.4.1.9.9.132.1.2.1.1 · 1 row entry · 30 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3AlarmConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3AlarmConfigTable' 
The DS3 interface alarm configuration table. This table contains
the parameters associated with detecting and declaring alarms for
the interface. The parameters include severity of alarm, alarm
integration parameters and 15 minute and 24 hour thresholds.
cds3AlarmConfigEntry row .1.3.6.1.4.1.9.9.132.1.2.1.1.1
An entry in the T3/E3 Alarm Configuration Table.
The entries are automatically created for an ifType value of
'ds3'(30), with default values for objects. Thresholds may be
configured for:
Line Code Violations(LCV)…
Indexes
Column Syntax OID
cds3NEAlarmUpCount
This parameter specifies the increment to the Near End alarm
integration counters. The local alarms are LOS and LOF. The
Default value is 6 and the integration counter is incremented by
this value every 10 ms while the …
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.1
cds3NEAlarmDownCount
This parameter specifies the decrement to the Near End alarm
integration counters. The alarms are LOS and LOF. The
Default value is 1 and the integration counter is decremented by
this value every 10 ms while no alarm …
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.2
cds3NEAlarmThreshold
The value set in this object determines the value that
the alarm integration counter must reach for an near end
alarm to be declared. If the up count is 6, and the threshold 150,
an Alarm is integrated in 2.5 seconds. I…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.3
cds3FEAlarmUpCount
This parameter specifies the increment to the Far End alarm
integration counters. The alarms are Remote Alarm Indication
(RAI) and Alarm Indication Signal(AIS). The integration counter is
incremented by this value ever…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.4
cds3FEAlarmDownCount
This parameter specifies the decrement to the Far End alarm
integration counters. The alarms are Alarm Indication Signal
(AIS) and Remote Alarm Indication (RAI). The integration counter
is decremented by this val…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.5
cds3FEAlarmThreshold
The value set in this object determines the value that
the alarm integration counter must reach for an far end
Alarm to be declared. If the up count is 6, the down count
is 1 and the threshold 150, an Alarm is integrate…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.6
cds3StatisticalAlarmSeverity
This variable is used to setup the severity of any of the
Statistical alarms. So when a Statistical Counter exceeds its
specified threshold the system will send the alarm with
appropriate severity. A value of none(3) i…
Enumerationr/w
Enumerated Values:
1minor
2major
3none
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.7
cds3LCV15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.8
cds3LCV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.9
cds3LES15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.10
cds3LES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.11
cds3PCV15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be
declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.12
cds3PCV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.13
cds3PES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.14
cds3PES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.15
cds3PSES15MinThreshold
The value set in this object determines the value
which when exceeded in a 15 minute window causes
a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.16
cds3PSES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.17
cds3SEFS15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.18
cds3SEFS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.19
cds3UAS15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to
be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.20
cds3UAS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.21
cds3CCV15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.22
cds3CCV24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared.
The threshold is checked every 15 minutes for the preceding 24 hour
interval.…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.23
cds3CES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.24
cds3CES24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.25
cds3CSES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.26
cds3CSES24HrThreshold
The value set in this object determines the value which when
exceeded in a sliding 24 hour window causes a statistical
alarm to be declared. Not for E3.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.27
cds3LSES15MinThreshold
Used to set the 15 minute threshold for LSES(Line Severely Errored
Seconds).

The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be
d…
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.28
cds3LSES24HrThreshold
The value set in this object determines the value which when
exceeded in a sliding 24 hour window causes a statistical alarm
to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.29
cds3LineStatisticalAlarmState
This is a bitmap of the DS3 Line Statistical alarms. It is
represented as a sum where value 2^(N-1) is added to the
sum if threshold corresponding to bit N is exceeded. Zero
indicates no alarms.

Itemize…
Unsigned32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.1.1.30

cds3AlarmConfigPlcpTable

table
.1.3.6.1.4.1.9.9.132.1.2.1.2 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3AlarmConfigPlcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3AlarmConfigPlcpTable' 
The ATM interface PLCP alarm configuration table. PLCP is a sublayer
over the DS3 interface, that carries ATM cells.
cds3AlarmConfigPlcpEntry row .1.3.6.1.4.1.9.9.132.1.2.1.2.1
An entry in the DS3 PLCP Alarm Configuration table. The entries
contain parameters to configure DS3 PLCP error statistics
thresholds, so that an alarm is raised whenever any threshold
is exceeded. The entries are autom…
Indexes
Column Syntax OID
cds3PlcpStatisticalAlarmSeverity
This variable sets up the severity of PLCP Statistical
alarm. So when PLCP Statistical alarm is detected the
module will send the alarm with appropriate severity.
A value of none(3) indicates that no alarm will be raise…
Enumerationr/w
Enumerated Values:
1minor
2major
3none
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.1
cds3PlcpBip8CV15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.2
cds3PlcpBip8CV24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.3
cds3PlcpBip8ES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.4
cds3PlcpBip8ES24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.5
cds3PlcpBip8SES15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.6
cds3PlcpBip8SES24HrThreshold
The value set in this object determines the value which when exceeded
in a sliding 24 hour window causes a statistical alarm to be declared.
The threshold is checked every 15 minutes for the preceding 24 hour
interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.7
cds3PlcpSEFS15MinThreshold
The value set in this object determines the value which when exceeded
in a 15 minute window causes a statistical alarm to be declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.8
cds3PlcpSEFS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.9
cds3PlcpUAS15MinThreshold
The value set in this object determines the value which when
exceeded in a 15 minute window causes a statistical alarm to be
declared.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.10
cds3PlcpUAS24HrThreshold
The value set in this object determines the value
which when exceeded in a sliding 24 hour window causes
a statistical alarm to be declared. The threshold is
checked every 15 minutes for the preceding 24 hour interval.
Unsigned32r/w
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.9.132.1.2.1.2.1.11

cds3AlarmPlcpTable

table
.1.3.6.1.4.1.9.9.132.1.2.2 · 1 row entry · 12 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3AlarmPlcpTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3AlarmPlcpTable' 
The Plcp interface alarm table. This table maintains the
CV,ES,SES, SEFS and UAS for DS3 line with Plcp framing selected.
Please refer to RFC2496 for description of these various error
statistics.
cds3AlarmPlcpEntry row .1.3.6.1.4.1.9.9.132.1.2.2.1
An entry in the DS3 Plcp Alarm table. Bucket statistics(15 minute
and 24 hour interval statistics) are gathered for each existing DS3
line with PLCP frame format selected. An entry is created
automatically and is indexe…
Indexes
Column Syntax OID
cds3PlcpLineAlarmState
This variable is a bitmap of the DS3 Line ALarms.
It is represented as sum where value 2^(N-1) is added to the
sum if alarm corresponding to bit N is exceeded.
A value of zero for this object indicates no alarms.
…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.1
cds3PlcpLineStatisticalAlarmState
This variable is a bitmap of the DS3 Plcp Line Statictical
Alarms. It is represented as a sum, where value 2^(N-1) is added
to the sum if threshold corresponding to bit N is exceeded.
A value of zero for this object ind…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.2
cds3PlcpBip8CVCurrent
The number of BIP-8 code violations (CV) encountered by
the line in the current 15 minute period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.3
cds3PlcpBip8CV24HrBucket
The number of BIP-8 CVs encountered by the line in the last 24
hours.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.4
cds3PlcpBip8ESCurrent
The number of BIP-8 Errored Seconds(ES) encountered by the line
in the current 15 minute period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.5
cds3PlcpBip8ES24HrBucket
The number of BIP-8 ES encountered by the line in the last 24 hour.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.6
cds3PlcpBip8SESCurrent
The number of BIP-8 Severely Errored Seconds(ES) encountered by the
line in the current 15 minute period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.7
cds3PlcpBip8SES24HrBucket
The number of BIP-8 SES encountered by the line in the last 24 hour.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.8
cds3PlcpSEFSCurrent
The number of BIP-8 Severely Errored Framing Seconds(SEFS)
encountered by the line in the current 15-minute period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.9
cds3PlcpSEFS24HrBucket
The number of BIP-8 SEFS encountered by the line in the last 24 hour.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.10
cds3PlcpUASCurrent
The number of Unavailable Seconds(UAS) encountered by the line
in the current 15-minute period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.11
cds3PlcpUAS24HrBucket
The number of BIP-8 UAS encountered by the line in the last 24 hour.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.2.2.1.12

cds3StatsTable

table
.1.3.6.1.4.1.9.9.132.1.3.1 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3StatsTable' 
T3/E3 Statistics table.  This table maintains the number of times the 
line encountered Loss of Signal(LOS), out of frame(LOF), Alarm
Indication signals(AIS), Remote alarm indications(RAI), C-bit coding
violations(CCV), Framing Errors(FE), from the time it is up. Line
fails and goes down as a result of failures. When the line is brought 
back up again by the user the error statistics are cleared.
cds3StatsEntry row .1.3.6.1.4.1.9.9.132.1.3.1.1
An entry in the T3/E3 Statistics table. Statistics
are gathered for each existing T3/E3 line. An entry is created
automatically for each T3/E3 line that is activated.
Indexes
Column Syntax OID
cds3RcvLOSCount
The number of times Loss of Signal was detected
with or without integrating to LOS alarm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.1
cds3RcvOOFCount
The number of times Out of Frame was detected with or without
integrating to OOF alarm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.2
cds3RAICount
The number of timesRemote Alarm Indication was detected with
or without integrating to RAI alarm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.3
cds3CCVCount
The counter associated with the number of C-Bit Coding
Violations encountered by a T3/E3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.4
cds3FECount
The number of Framing Errors encountered by a T3/E3 interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.5
cds3EXZSCount
The number of Excessive Zeros(EXZ) by a T3/E3 interface.
An EXZ is the occurrence of any string of zeros having length
equal to or greater than 3 for B3ZS, or any string of zeros
having length greater than 4 for HDB3.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.6
cds3LCVCount
The count of both BPVs(Bipolar Violations) and EXZs(Excessive
Zeros) encountered by a T3/E3 interface.An EXZ increments
the LCV by one regardless of the length of the zero string.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.7
cds3PCVCount
This is the count of P-bit Coding Violation(PCV) error event
encountered by DS3 interface. For all DS3 applications, a
coding violation error event is a P-bit Parity Error(PERR) event.
The parity errors occur when the…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.8
cds3CPECount
The number of C-bit parity errors(CPERR) on a DS3 interface.
This value is calculated over noninformation bits in the
DS3 frame.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.9
cds3FEBECount
The number of Far End Block Errors(FEBE) encountered by
a T3/E3 interface.These include frame alignment errors,
multiframe alignment errors, and C-bit parity errors.
These errors are generated by the transmitter at the …
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.10
cds3RcvAISCount
The number of times Alarm Indication Signals(AIS) were detected.
The AIS indicates that an upstream failure has been detected by
the far end.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.1.1.11

cds3PlcpStatsTable

table
.1.3.6.1.4.1.9.9.132.1.3.2 · 1 row entry · 9 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3PlcpStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3PlcpStatsTable' 
T3 Plcp Statistics table. This table maintains the errors 
encountered by the T3 line with  Plcp frame format selected, 
from the time the line is up.Line fails and goes down as a 
result of failures. When the line is brought  back up again 
by the user after eliminating the error conditions, the 
statistics are cleared.
cds3PlcpStatsEntry row .1.3.6.1.4.1.9.9.132.1.3.2.1
An entry in the T3 Plcp Stats table. Statistics are gathered for
each existing T3 line with PLCP frame format selected. An entry is
created automatically and is indexed by the T3 line number.
Indexes
Column Syntax OID
cds3PlcpRcvBip8Count
The number of of BIP-8 errors encountered by the line.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.1
cds3PlcpRcvOOFCount
The number of times Out of Frame(OOF) was detected
with or without integrating to OOF alarm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.2
cds3PlcpRcvRAICount
The number of times Remote Alarm Indication(RAI) was detected
with or without integrating to RAI alarm.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.3
cds3PlcpFECount
The number of Framing Errors detected.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.4
cds3PlcpFESecCount
The number of Framing Error errored seconds.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.5
cds3PlcpSEFSecCount
The number of Severely errored Framing error seconds.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.6
cds3PlcpFEBECount
The count of Far End Block Errors (FEBE) detected.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.7
cds3PlcpFEBESecCount
The number of FEBE errored seconds.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.8
cds3PlcpSEFEBESecCount
The number of Severely errored FEBE seconds.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.2.1.9

cds3IntervalTable

table
.1.3.6.1.4.1.9.9.132.1.3.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3IntervalTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3IntervalTable' 
The DS3 interface interval table.
cds3IntervalEntry row .1.3.6.1.4.1.9.9.132.1.3.4.1
An entry in the T3/E3 current interval table.
Indexes
Column Syntax OID
cds3IntervalNumber
A number between 0 and 96, where 1 is the most
recently completed 15 minute interval and 96 is
the 15 minute interval completed 23 hours and 45
minutes prior to interval number 1. Interval number
0 refers to the current…
Integer32
Constraints:
range: 0-96
 .1.3.6.1.4.1.9.9.132.1.3.4.1.1
cds3IntervalLSESs
The number of LSESs encountered by the line
in 15 minute interval.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.4.1.2

cds3Current24HrTable

table
.1.3.6.1.4.1.9.9.132.1.3.5 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3Current24HrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3Current24HrTable' 
The DS3 interface current 24 hour table. This table contains
counters for current 24 hour interval. Threshold on this counters
are configured through cds3AlarmConfigTable table. 24 hour 
interval is aligned to wall clock.
cds3Current24HrEntry row .1.3.6.1.4.1.9.9.132.1.3.5.1
An entry in the T3/E3 current 24 hour counter table.
The entries are automatically created for an ifType value of
'ds3'(30), when interface is made active.
Indexes
Column Syntax OID
cds3LCVCurrent24Hr
The number of LCVs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.1
cds3LESCurrent24Hr
The number LESs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.2
cds3PCVCurrent24Hr
The number PCVs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.3
cds3PESCurrent24Hr
The number of PESs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.4
cds3PSESCurrent24Hr
The number of PSESs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.5
cds3SEFSCurrent24Hr
The number of SEFSs encountered by the line since
the start of the current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.6
cds3UASCurrent24Hr
The number of UASs encountered by the line since
the start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.7
cds3CCVCurrent24Hr
The number CCVs encounterd by the line since the start
of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.8
cds3CESCurrent24Hr
The number of CESs encountered by the line since the
start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.9
cds3CSESCurrent24Hr
The number of CSESs encountered by the line since th
start of current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.10
cds3LSESCurrent24Hr
The number of LSESs (Line severedly errored seconds)
encountered by the line since the start of current
24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.5.1.11

cds3Previous24HrTable

table
.1.3.6.1.4.1.9.9.132.1.3.6 · 1 row entry · 11 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds3Previous24HrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS3-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS3-MIB::cds3Previous24HrTable' 
The DS3 interface previous 24 hour table. This table contains
counters for previous 24 hour interval. Implementation of
this table is optional.
cds3Previous24HrEntry row .1.3.6.1.4.1.9.9.132.1.3.6.1
An entry in the T3/E3 current 24 hour counter table.
The entries are automatically created for an ifType value of
ds3(30), when interface is made active.
Indexes
Column Syntax OID
cds3LCVPrevious24Hr
The number of LCVs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.1
cds3LESPrevious24Hr
The number LESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.2
cds3PCVPrevious24Hr
The number PCVs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.3
cds3PESPrevious24Hr
The number of PESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.4
cds3PSESPrevious24Hr
The number of PSESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.5
cds3SEFSPrevious24Hr
The number of SEFSs encountered by the line in
the start of the current 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.6
cds3UASPrevious24Hr
The number of UASs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.7
cds3CCVPrevious24Hr
The number CCVs encounterd by the line in the
previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.8
cds3CESPrevious24Hr
The number of CESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.9
cds3CSESPrevious24Hr
The number of CSESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.10
cds3LSESPrevious24Hr
The number of LSESs encountered by the line in
the previous 24 hour period.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.132.1.3.6.1.11