CISCO-DS0-CROSS-CONNECT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
5

cds0CrossConnectConfigTable

table
.1.3.6.1.4.1.9.9.9999.1.1.1 · 1 row entry · 5 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cds0CrossConnectConfigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DS0-CROSS-CONNECT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DS0-CROSS-CONNECT-MIB::cds0CrossConnectConfigTable' 
This table is used to establish a DS0 cross connection.
A DS0 cross connect is established by binding a unique
DS0 group containing one or more DS0s of a single Ds1 
interface to another unique DS0 group containing one or 
more DS0s of a single DS1 interface.
cds0CrossConnectConfigEntry row .1.3.6.1.4.1.9.9.9999.1.1.1.1
An entry in cds0CrossConnectConfigTable table represents a DS0
cross connection. The two end point of the connection are:
end point 1: cds0Endpt1Ds1 cds0Endpt1Ds0Group
end point 2: cds0Endpt2Ds1 cds0Endpt2Ds0Grou…
Indexes
Column Syntax OID
cds0Endpt1Ds1
The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the first end point of the
Ds0 connection.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.9.9.9999.1.1.1.1.1
cds0Endpt1Ds0Group
The value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt1Ds1'.
This Ds0 group is used as the first end point of the
Ds0 connection.
Unsigned32
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.9999.1.1.1.1.2
cds0Endpt2Ds1
The value of this object equals to the 'ifIndex' of a
Ds1 interface.
This Ds1 interface is used as the second end point of the
Ds0 connection.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.9.9.9999.1.1.1.1.3
cds0Endpt2Ds0Group
The value of this object identifies a Ds0 group which contains
one of more Ds0(s) within the Ds1 interface represented by
'cDs0Endpt2Ds1'.
This Ds0 group is used as the second end point of the
Ds0 connection.
Unsigned32r/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.9.9.9999.1.1.1.1.4
cds0ConnRowStatus
This object is used to create or delete an entry.

The mandatory objects for creating an entry in this table:
'cds0Endpt2Ds1'
'cds0Endpt2Ds0Group'

The following objects are not allowed t…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.9999.1.1.1.1.5