CISCO-DOT11-LBS-MIB Table View

This table contains the set of attributes for 
configuration of connection to remote LBS positioning
servers and tracking methods supported on the servers.
A positioning server may support LBS application at 
multiple UDP ports.  This wireless station serves as
a LBS agent to track the wireless client device.  It
receives multicast wireless packet sending by the 
client devices on specific multicast addresses and 
forward the information to the positioning server.

cdot11LbsProfileEntry row .1.3.6.1.4.1.9.9.454.1.1.1.1

Each entry contains parameters to configure
a LBS positioning server profile for this wireless
station.

Indexes

cdot11LbsProfileName

Column	Syntax	OID
cdot11LbsProfileName This is the name of LBS profile for configuration of a connection to a LBS positioning server at a specific address and UDP port.	OctetString Constraints: range: 1-16	.1.3.6.1.4.1.9.9.454.1.1.1.1.1
cdot11LbsServerAddressType This is the address type of the cdot11LbsServerAddress.	INET-ADDRESS-MIBInetAddressTyper/w Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.4.1.9.9.454.1.1.1.1.2
cdot11LbsServerAddress This is the address of the LBS positioning server. The cdot11LbsServerAddressType specifies the type of this address.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.454.1.1.1.1.3
cdot11LbsServerUdpPort This is the UDP port of the LBS positioning server used to receive LBS packets from this wireless station.	INET-ADDRESS-MIBInetPortNumberr/w Type Constraints: range: 0..65535	.1.3.6.1.4.1.9.9.454.1.1.1.1.4
cdot11LbsTrackMethod This specifies the method used to detect the location of the wireless client relative to the position of this wireless station. RSSI method uses the strength of the received signals from the wireless client devices to …	Cdot11LbsTrackMethodTyper/w Type Values: 0 rssi	.1.3.6.1.4.1.9.9.454.1.1.1.1.5
cdot11LbsPsPacketType This specifies the type of LBS packets sent to the LBS position server from this wireless station.	Cdot11LbsPsPacketTyper/w Type Values: 1 extended 2 short	.1.3.6.1.4.1.9.9.454.1.1.1.1.6
cdot11LbsTrackMulticast This is the multicast MAC destination address of the LBS frames sending from the wireless clients to this wireless station.	SNMPv2-TCMacAddressr/w Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.454.1.1.1.1.7
cdot11LbsMatchChannel This object determines if this wireless station will include LBS frames received in channels other than the sender's channel in the RSSI measurement. If the value is 'true', this station will include only LBS frames m…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.454.1.1.1.1.8
cdot11LbsProfileRowStatus This configures a new LBS positioning server for this wireless station and modifies or deletes an existing positioning server configuration. Creation of rows must be done via 'createAndGo' and with the c…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.454.1.1.1.1.9

This table configures the Location Based Services
settings on the IEEE 802.11 radio interfaces of 
this device.                  
          
This table has an expansion dependent relationship
on the cdot11LbsProfileTable.  This table uses the
ifIndex of interfaces of ifType ieee80211(71) as 
the expansion index.

cdot11LbsProfInterfaceEntry row .1.3.6.1.4.1.9.9.454.1.1.2.1

Each entry indicates if the LBS client location
tracking by a particular location positioning server
profile is enabled on an IEEE 802.11 interface.

Indexes

cdot11LbsProfileName IF-MIBifIndex

Column	Syntax	OID
cdot11LbsProfInterfaceRowStatus This configures and attaches a LBS profile to an IEEE 802.11 wireless LAN network interface or remove a configured interface from the profile. Creation of rows must be done via 'createAndGo' and specifyi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.454.1.1.2.1.1