CISCO-DM-MIB Table View

This table contains Domain Manager related parameters
which can be configured and monitored. There is one
entry for each of the VSANs configured on this switch.
An entry will be created whenever a VSAN is created on
the switch. The entry will be removed when the
corresponding VSAN is deleted.

dmEntry row .1.3.6.1.4.1.9.9.302.1.1.1.1

An entry provides information on the domain manager
for a VSAN.

Indexes

CISCO-VSAN-MIBvsanIndex

Column	Syntax	OID
dmConfigDomainId The configured Domain ID of the local switch on this VSAN or zero if no Domain ID has been configured. The meaning of this object depends on dmConfigDomainIdType object. If dmConfigDomainIdType is 'prefer…	CISCO-ST-TCDomainIdOrZeror/w Type Constraints: range: 0..239	.1.3.6.1.4.1.9.9.302.1.1.1.1.1
dmConfigDomainIdType Type of configured Domain ID.	Enumerationr/w Enumerated Values: 1 static 2 preferred	.1.3.6.1.4.1.9.9.302.1.1.1.1.2
dmEnable Enables the Domain Manager on this VSAN. If enabled on an active VSAN, the switch will participate in principal switch selection. If disabled, the switch will participate in neither the principal switch s…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.1.1.3
dmAutoReconfigure This object determines how the switch responds to certain error conditions. The condition that can cause these errors is merging of two disjoint fabrics that have overlapping Domain ID list. …	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.1.1.4
dmContiguousAllocation Determines how the switch behaves when elected as the principal switch. If true, switch won't accept non-contiguous domain IDs in RDIs and will try to replace all the Domain IDs in the list with contiguous domain IDs if…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.1.1.5
dmPriority Priority of the switch to be used in principal switch selection process.	DomainPriorityr/w Type Constraints: range: 1..255	.1.3.6.1.4.1.9.9.302.1.1.1.1.6
dmRestart This object tells the Domain Manager to rebuild the Domain ID tree all over again. If this object is set to 'disruptive', then a RCF (ReConfigure Fabric) is generated in the VSAN in order for the fabric t…	Enumerationr/w Enumerated Values: 1 nonDisruptive 2 disruptive 3 noOp	.1.3.6.1.4.1.9.9.302.1.1.1.1.7
dmFabricName The WWN that is used for fabric logins on this VSAN. This object is used only if the value of dmEnable is false. If the value of dmEnable is true, then principal switch WWN is used. It is automatically set to the defaul…	CISCO-ST-TCFcNameIdOrZeror/w Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.302.1.1.1.1.8
dmPrincipalSwitchWwn The WWN of the Principal Switch on this VSAN, or zero-length string if the identity of the principal switch is unknown.	CISCO-ST-TCFcNameIdOrZero Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.302.1.1.1.1.9
dmLocalSwitchWwn The WWN of the local Switch on this VSAN.	CISCO-ST-TCFcNameIdOrZero Type Constraints: range: 0 range: 8 range: 16	.1.3.6.1.4.1.9.9.302.1.1.1.1.10
dmAssignedAreaIdList The list of Area IDs which have been assigned in this VSAN, formatted as an array of octets in ascending order. There could zero or more Area IDs assigned on this VSAN. Area ID is an 8-bit value. And ther…	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.9.9.302.1.1.1.1.11
dmFcIdsGranted The total number of FC IDs that are granted (for local use) by the Domain Manager on the local switch since the switch has been initialized. Note that all such FC IDs have the local switch's Domain ID.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.12
dmFcIdsRecovered The total number of FC IDs that are recovered by the Domain Manager on the local switch since the switch has been initialized. A recovered FC ID is one that is explicitly returned after previously being granted for loca…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.13
dmFreeFcIds The number of FC IDs that are unassigned on this VSAN.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.14
dmAssignedFcIds The number of FC IDs that are assigned on this VSAN.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.15
dmReservedFcIds The number of FC IDs that are reserved on this VSAN.	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.16
dmRunningPriority The running priority of the local switch on this VSAN.	DomainPriority Type Constraints: range: 1..255	.1.3.6.1.4.1.9.9.302.1.1.1.1.17
dmPrincSwRunningPriority The running priority of the principal switch on this VSAN.	DomainPriority Type Constraints: range: 1..255	.1.3.6.1.4.1.9.9.302.1.1.1.1.18
dmState The state of the Domain Manager on the local switch on this VSAN.	DmState Type Values: 1 starting 2 unconfigured 3 principalSwitchSelection 4 domainIdDistribution 5 buildFabricPhase 6 reconfigureFabricPhase 7 stable 8 stableWithNoEports 9 stableWithDomainConfigured 10 noDomains 11 disabled 12 suspended 13 unknown	.1.3.6.1.4.1.9.9.302.1.1.1.1.19
dmPrincipalSwitchSelections The number of principal switch selections on this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.20
dmBuildFabrics The number of 'BuildFabrics' (BFs) that have occurred on this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.21
dmFabricReconfigures The number of 'ReconfigureFabrics' (RCFs) that have occurred on this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.22
dmDomainId The Domain ID of the local switch on this VSAN or zero if no Domain ID has been assigned.	CISCO-ST-TCDomainIdOrZero Type Constraints: range: 0..239	.1.3.6.1.4.1.9.9.302.1.1.1.1.23
dmLocalPrincipalSwitchSelctns The number of times the local switch became the principal switch on this VSAN.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.302.1.1.1.1.24
dmFcIdPersistency Indicates if the FC IDs assigned on this VSAN are persistent or not. If this object is set to 'true', then all the FC ID assigned on this VSAN are made persistent on this VSAN. If this object is set to 'f…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.1.1.25
dmFcIdPurge This object tells the Domain Manager to purge the FC IDs on this VSAN in the FC ID persistency database. If the value of this object is 'enable', then the FC IDs which are dynamic and not currently used …	Enumerationr/w Enumerated Values: 1 noOp 2 enable	.1.3.6.1.4.1.9.9.302.1.1.1.1.26
dmOptimize Each 'bit' within the value of an object of this type, specifies a configured optimization type. The value of each 'bit' (set/reset) represents whether an optimization type is configured or not. …	OctetStringr/w Constraints: range: 0-8	.1.3.6.1.4.1.9.9.302.1.1.1.1.27

This table contains interface configuration of the
domain manager per VSAN.
          
An entry in this table is automatically created when
an E_port becomes non-isolated and there is a
entry in dmTable for that VSAN.
          
An entry is deleted automatically from this table if :
a) the correponding interface becomes non-existent, or
b) the correponding interface becomes a non-E_port
   and all the writable objects has default values.
                  or
c) the dmTable entry for the corresponding VSAN is
   deleted.
          
Entries in this table can be created via dmIfRowStatus
only as the means to specify non-default parameter values
for an interface at a time when that interface is either
down or is a non-E_port.
          
So an entry in this table exists when one or both of
these conditions holds:
- one or more configuration parameters have non-default
  values for an interface which is either down or a
  non-E_port and corresponding VSAN has an entry in the
  dmTable, and/or
- the interface is an E_port and it is up.
          
This has a number of consequences:
- an entry exists for a non-E_port or an E_port which is
  down whenever that interface has non-default parameters
  and the corresponding VSAN has an entry in the dmTable;
- an entry cannot be created (via dmIfRowStatus) for an
  interface with default parameters; instead, the agent
  creates/deletes an entry for an interface with default
  parameters according to whether the E_port is up or
  down.
- an entry can not be created via dmIfRowStatus unless
  non-default parameter values are (simultaneously)
  configured for an interface which is a non-E_port or a
  down interface, and the correspoding VSAN has an entry
  in the dmTable.
- deleting an entry via RowStatus when either the
  interface is down and configured with non-default
  values or the interface is up, is equivalent to
  resetting its parameters to their default values.
  If the interface is down and was configured with
  default- values, then the entry would be deleted.

dmIfEntry row .1.3.6.1.4.1.9.9.302.1.1.2.1

An entry gives information on interface
configuration on a particular VSAN.

Indexes

CISCO-VSAN-MIBvsanIndex IF-MIBifIndex

Column	Syntax	OID
dmIfRcfReject This object determines if the incoming ReConfigure Fabric (RCF) messages on this interface on this vsan is accepted or not. If this object is 'true', then the incoming RCF is rejected. If 'false', incoming RCF is accept…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.2.1.1
dmIfRole The role of this interface.	DomainInterfaceRole Type Values: 1 nonPrincipal 2 principalUpstream 3 principalDownsteam 4 isolated 5 down 6 unknown	.1.3.6.1.4.1.9.9.302.1.1.2.1.2
dmIfRowStatus The status of this row. This object can be used to create an entry only if the corresponding interface exists. If the interface does not exists, a create will fail.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.302.1.1.2.1.3

This table lists the FC IDs which are in the FC ID
persistency database.
          
The FC ID persistency is a feature which enables FC
devices to get same FC IDs even if they disappear and
appear back, if enabled.
          
The FC ID persistency database contains information
about the FC IDs which are assigned to FC devices
either statically (configured) or dynamically.
          
Entries are automatically created when a FC ID is
assigned and dmFcIdPersistency is 'true' on this VSAN.
          
The entries can also be created and deleted via
the dmFcIdPersistencyRowStatus object.
          
Entries are deleted when corresponding
dmFcIdPersistencyType is 'dynamic' and
dmFcIdPersistencyUsed is 'false' if the object
dmFcIdPurge is set to 'enable'.
          
An entry cannot be created if the dmFcIdPersistency
is 'false'.
          
If the dmDomainId is changed on a VSAN, then all the
entries on that VSAN in this table are deleted. Also,
if the dmConfigDomainId is not equal to dmDomainId on
a VSAN, then all the entries in that VSAN are deleted.

dmFcIdPersistencyEntry row .1.3.6.1.4.1.9.9.302.1.1.4.1

An entry provides information about a persistent FC ID.

Indexes

CISCO-VSAN-MIBvsanIndex dmFcIdPersistencyWwn

Column	Syntax	OID
dmFcIdPersistencyWwn This is either the port WWN of the FC device if the local port is a F_port or WWN of the local port if the local port is a FL_port. The local port is the port on the local device to which the FC device is attached.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.302.1.1.4.1.1
dmFcIdPersistencyFcId The FC ID assigned for this WWN on this VSAN. The third octet of this object must be '0x00' if value of dmFcIdPersistencyNum is 'area'. This object cannot be changed if either the value of …	CISCO-ST-TCFcAddressIdr/w Type Constraints: range: 3	.1.3.6.1.4.1.9.9.302.1.1.4.1.2
dmFcIdPersistencyNum The number of FC IDs starting from 'dmFcIdPersistencyFcId' which are assigned either statically or dynamically for this WWN on this VSAN. The value 'one' means just one FC ID is assigned. The value 'area…	Enumerationr/w Enumerated Values: 1 one 2 area	.1.3.6.1.4.1.9.9.302.1.1.4.1.3
dmFcIdPersistencyUsed This object indicates if this FC ID is used or not.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.302.1.1.4.1.4
dmFcIdPersistencyType The type of persistency of this FC ID.	Enumerationr/w Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.9.9.302.1.1.4.1.5
dmFcIdPersistencyRowStatus Status of this row. An entry cannot be created until following object is instantiated : - dmFcIdPersistencyFcId - dmFcIdPersistencyNum Note that an entry cannot be deleted if the corresponding dmFcIdPersi…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.302.1.1.4.1.6

This table contains list of allowed domain IDs in the
local VSANs. So in a VSAN, domain IDs can be assigned
only from the allowed list. All the domain IDs which
are not allowed are reserved.
Note that this is possible in a VSAN only if the local
device is the principal switch in that VSAN.

dmAllowedDomainIDListEntry row .1.3.6.1.4.1.9.9.302.1.1.5.1

An entry (conceptual row) in this table. Each entry
represents an domain ID list allowed in a VSAN.

Indexes

CISCO-VSAN-MIBvsanIndex dmAllowedDomainIDListId

Column	Syntax	OID
dmAllowedDomainIDListId The identifier of the domain ID list.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.9.302.1.1.5.1.1
dmAllowedDomainIDList This object provides the lists of domains that are allowed. Each octet within the value of the object specifies a set of domains. The first octet specifies domains 0 through 7. Similarly, the second octet specifies doma…	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.302.1.1.5.1.2
dmAllowedDomainIDListUser The name of the entity using this domain ID list on this vsan.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.302.1.1.5.1.3

This table contains area statistics on this domain
manager per VSAN. Each octet in the dmAssignedAreaList
can be used to index  this table to find information on
each area.

dmAreaEntry row .1.3.6.1.4.1.9.9.302.1.2.1.1

An entry gives information on the Area ID and all
Port IDs that were assigned for within an area for
a particular VSAN.

Indexes

CISCO-VSAN-MIBvsanIndex dmAreaAreaId

Column	Syntax	OID
dmAreaAreaId The Area ID of this area.	Unsigned32 Constraints: range: 0-255	.1.3.6.1.4.1.9.9.302.1.2.1.1.1
dmAreaAssignedPortIdList The list of Port IDs which have been assigned in this Area and VSAN, formatted as an array of octets in ascending order. There could be zero or more Port IDs assigned on this Area and VSAN. Port ID is an …	OctetString Constraints: range: 0-256	.1.3.6.1.4.1.9.9.302.1.2.1.1.2

This table contains all information known by the
local switch about all the domains which have been
assigned in each of the VSANs.

dmDatabaseEntry row .1.3.6.1.4.1.9.9.302.1.2.2.1

An entry (conceptual row) in the dmDatabaseTable
containing information about one Domain ID in one
VSAN.

Indexes

CISCO-VSAN-MIBvsanIndex dmDatabaseDomainId

Column	Syntax	OID
dmDatabaseDomainId The Domain ID for which this row contains information.	CISCO-ST-TCDomainId Type Constraints: range: 1..239	.1.3.6.1.4.1.9.9.302.1.2.2.1.1
dmDatabaseSwitchWwn The WWN of the switch to which the corresponding value of dmDatabaseDomainId is currently assigned for the particular VSAN.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.302.1.2.2.1.2

This table contains all the FC IDs that have recently
been released. So it lists all the FC IDs that have
valid WWN to FC ID  mappings and currently not assigned
to any ports. These FC ID were assigned to ports and now,
have been released. This cached FC ID contains only Area
ID and Port ID information. The FC ID cache is kept to
provide best effort re-assignment of same FC IDs. i.e,
an Nx_port would get the same FC ID when it asks for a FC
ID again, after releasing it.

dmFcIdCacheEntry row .1.3.6.1.4.1.9.9.302.1.2.4.1

An entry (conceptual row) in the dmFcIdCacheTable
containing information about one FC ID that was
released from a WWN, corresponding to a range of one or
more ports. An entry is created when a FC ID is
released by the l…

Indexes

CISCO-VSAN-MIBvsanIndex dmFcIdCacheWwn

Column	Syntax	OID
dmFcIdCacheWwn The WWN of the port associated this entry.	CISCO-ST-TCFcNameId Type Constraints: range: 8	.1.3.6.1.4.1.9.9.302.1.2.4.1.1
dmFcIdCacheAreaIdPortId The Area ID and Port ID of FC ID that was assigned and has since been released by this port on this VSAN. Note that this object is only 2 bytes and only contains the Area ID and Port ID.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.9.9.302.1.2.4.1.2
dmFcIdCachePortIds Number of port IDs assigned and/or released starting from Port ID contained in the second byte of dmFcIdCacheAreaIdPortId for the Area ID contained in the first byte of object dmFcIdCacheAreaIdPortId.	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.302.1.2.4.1.3