CISCO-DLC-SWITCH-MIB Table View

This table contains mapping information 
for each SDLC Link Station in a FRAS-BNN
to SDLC connection. All entries are derived
entirely from the router configuration.

frasBnnSdlcConEntry row .1.3.6.1.4.1.9.9.76.1.1.1.1

This table contains the entries defined
for a specific SDLC Link Station in a
BNN-SDLC configuration.

Indexes

RFC1213-MIBifIndex bnnSdlcConAddress

Column	Syntax	OID
bnnSdlcConAddress This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.	SdlcAddress Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.1.1.1.1
bnnSdlcConState Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - …	Enumeration Enumerated Values: 1 reset 2 testSent 3 xidexchg 4 connrqsent 5 sigstnwait 6 connrspwait 7 connrspsent 8 contacted 9 discwait	.1.3.6.1.4.1.9.9.76.1.1.1.1.2
bnnSdlcConDlci The Data Link Connection Identifier used for this particular connection.	Integer32 Constraints: range: 16-1022	.1.3.6.1.4.1.9.9.76.1.1.1.1.3
bnnSdlcConFRInterface This is the Frame-Relay interface which the SDLC Link Station is using to connect to the Host.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.76.1.1.1.1.4
bnnSdlcConLocalSap The Local SAP for this SDLC station's corresponding LLC session to the host.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.1.1.1.5
bnnSdlcConRemoteSap The Remote SAP for this SDLC station's corresponding LLC session to the host.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.1.1.1.6

This table contains information for
each End Station in a FRAS-BNN to 
	LLC connection. The entries are derived
	entirely from the router configuration.

frasBnnLlcConEntry row .1.3.6.1.4.1.9.9.76.1.2.1.1

This table contains information for
a specific End Station's connection
state in a BNN-LLC connection.

Indexes

RFC1213-MIBifIndex bnnLlcConDeviceMacAddress bnnLlcConLanLocalSap bnnLlcConLanRemoteSap

Column	Syntax	OID
bnnLlcConDeviceMacAddress This value is the End Station's Local Mac-Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.2.1.1.1
bnnLlcConLanLocalSap The End Station's Local SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.2.1.1.2
bnnLlcConLanRemoteSap The End Station's Remote SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.2.1.1.3
bnnLlcConLanInterface This is the physical interace which the End Station is attached to.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.76.1.2.1.1.4
bnnLlcConDlci The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.	Integer32 Constraints: range: 16-1022	.1.3.6.1.4.1.9.9.76.1.2.1.1.5
bnnLlcConState Contains the FRAS state of the Link Station. reset - no activity testSent - TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Con…	Enumeration Enumerated Values: 1 reset 2 testSent 3 xidexchg 4 connrqsent 5 sigstnwait 6 connrspwait 7 connrspsent 8 contacted 9 discwait	.1.3.6.1.4.1.9.9.76.1.2.1.1.6
bnnLlcConLocalMacAddress The Mac-Address configured as the End Station's target or Remote address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.2.1.1.7
bnnLlcConFrLocalSap The FRAS router's Local SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.2.1.1.8
bnnLlcConFrRemoteSap The FRAS router's Remote SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.2.1.1.9

This table contains information for
each SDLC Link Station in a FRAS-BAN
to SDLC connection. The entries are
	derived entirely from the router 
	configuration.

frasBanSdlcConEntry row .1.3.6.1.4.1.9.9.76.1.3.1.1

This table contains information for
a specific SDLC Link Station in a
configured for a BAN connection.

Indexes

RFC1213-MIBifIndex banSdlcConAddress banSdlcConBanDlciMac

Column	Syntax	OID
banSdlcConLocalInterface This is the physical interface the SDLC Link Stations are connected to.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.76.1.3.1.1.1
banSdlcConAddress This value is the poll address of the secondary link station for this SDLC link. It uniquely identifies the SDLC link station within a single SDLC port.	SdlcAddress Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.3.1.1.2
banSdlcConBanDlciMac The End Station's target or Remote mac-address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.3.1.1.3
banSdlcConDlci The Data Link Connection Identifier for the corresponding LLC2 session over Frame-Relay to the host.	Integer32 Constraints: range: 16-1022	.1.3.6.1.4.1.9.9.76.1.3.1.1.4
banSdlcConState Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Con…	Enumeration Enumerated Values: 1 reset 2 testSent 3 xidexchg 4 connrqsent 5 sigstnwait 6 connrspwait 7 connrspsent 8 contacted 9 discwait	.1.3.6.1.4.1.9.9.76.1.3.1.1.5
banSdlcConVmac The End Station's virtual Mac-Address which is comprised of a TR formatted template and the SDLC Link Station address appended on the last nibble.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.3.1.1.6
banSdlcConBniAddress BNI is Boundary Node Identifier which is the FRAS-BAN connection's Remote address in TR-format. It is by default 4fff.0000.0000	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.3.1.1.7
banSdlcConFrLocalSap The FRAS router's Local SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.3.1.1.8
banSdlcConFrRemoteSap The FRAS router's Remote SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.3.1.1.9

This table contains information for each
LAN attached End Station in a FRAS-BAN
to LAN connection. The entries are from
	endstations which have their destination
	mac-addresses as the BAN-DLCI-MAC address.

frasBanLlcConEntry row .1.3.6.1.4.1.9.9.76.1.4.1.1

This table contains information for a
specific LAN attached End Station.

Indexes

banLlcEndstnLocalMac banLlcConLocalSap banLlcConRemoteSap banLlcBanDlciMac

Column	Syntax	OID
banLlcEndstnLocalMac This value is the End Station's Local Mac-Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.4.1.1.1
banLlcBanDlciMac This value is the End Station's Remote Mac-Address. It is also the FRAS-BAN connection's Local Mac-Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.4.1.1.2
banLlcConLocalSap The endstation's Local SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.4.1.1.3
banLlcConRemoteSap The endstation's Remote SAP.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.4.1.1.4
banLlcConDlci The Data Link Connection Identifier associated with the corresponding LLC2 session over Frame-Relay to the host.	Integer32 Constraints: range: 16-1022	.1.3.6.1.4.1.9.9.76.1.4.1.1.5
banLlcConState Contains the FRAS state of the Link Station. reset - no activity testSent- TEST Frames sent xidexchg - XID exchange in progress connrqsent - Connect request sent sigstnwait - Signal station wait state connrspwait - Con…	Enumeration Enumerated Values: 1 reset 2 testSent 3 xidexchg 4 connrqsent 5 sigstnwait 6 connrspwait 7 connrspsent 8 contacted 9 discwait	.1.3.6.1.4.1.9.9.76.1.4.1.1.6
banLlcConFrInterface This is the Frame-Relay interface for this particular session.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.76.1.4.1.1.7
banLlcBniAddress This value is the FRAS-BAN connection's Target Mac-Address. It is by default 4fff.0000.0000	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.9.9.76.1.4.1.1.8
banLlcConFrLocalSap The Local SAP of the corresponding LLC2 session over Frame-Relay to the host.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.4.1.1.9
banLlcConFrRemoteSap The Remote SAP of the corresponding LLC2 session over Frame-Relay to the host.	SAP Type Constraints: range: 1	.1.3.6.1.4.1.9.9.76.1.4.1.1.10