CISCO-DLC-SWITCH-MIB

        This is the MIB module for objects used to
manage FRAS sessions to the endstation. 
	These objects are specific to downstream or 
	enduster sessions only. It does not contain 
	objects supported by the FRAS-HOST MIB which 
	are specific to upstream or host-end sessions.
    
Source file
CISCO-DLC-SWITCH-MIB
Last revised
Identity
ciscoDlcSwitchMIB
Base OID
1.3.6.1.4.1.9.9.76
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB InterfaceIndexOrZero
RFC1213-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC MacAddress TEXTUAL-CONVENTION (no object page)
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-DLC-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-DLC-SWITCH-MIB::ciscoDlcSwitchMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DLC-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DLC-SWITCH-MIB::ciscoDlcSwitchMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (51)
.1.3.6.1.4.1.9.9.76
.1.3.6.1.4.1.9.9.76.1
.1.3.6.1.4.1.9.9.76.1.1
.1.3.6.1.4.1.9.9.76.1.1.1
.1.3.6.1.4.1.9.9.76.1.1.1.1
.1.3.6.1.4.1.9.9.76.1.1.1.1.1
Enumeration
.1.3.6.1.4.1.9.9.76.1.1.1.1.2
Integer32
.1.3.6.1.4.1.9.9.76.1.1.1.1.3
.1.3.6.1.4.1.9.9.76.1.1.1.1.4
.1.3.6.1.4.1.9.9.76.1.1.1.1.5
.1.3.6.1.4.1.9.9.76.1.1.1.1.6
.1.3.6.1.4.1.9.9.76.1.2
.1.3.6.1.4.1.9.9.76.1.2.1
.1.3.6.1.4.1.9.9.76.1.2.1.1
.1.3.6.1.4.1.9.9.76.1.2.1.1.1
.1.3.6.1.4.1.9.9.76.1.2.1.1.2
.1.3.6.1.4.1.9.9.76.1.2.1.1.3
.1.3.6.1.4.1.9.9.76.1.2.1.1.4
Integer32
.1.3.6.1.4.1.9.9.76.1.2.1.1.5
Enumeration
.1.3.6.1.4.1.9.9.76.1.2.1.1.6
.1.3.6.1.4.1.9.9.76.1.2.1.1.7
.1.3.6.1.4.1.9.9.76.1.2.1.1.8
.1.3.6.1.4.1.9.9.76.1.2.1.1.9
.1.3.6.1.4.1.9.9.76.1.3
.1.3.6.1.4.1.9.9.76.1.3.1
.1.3.6.1.4.1.9.9.76.1.3.1.1
.1.3.6.1.4.1.9.9.76.1.3.1.1.1
.1.3.6.1.4.1.9.9.76.1.3.1.1.2
.1.3.6.1.4.1.9.9.76.1.3.1.1.3
Integer32
.1.3.6.1.4.1.9.9.76.1.3.1.1.4
Enumeration
.1.3.6.1.4.1.9.9.76.1.3.1.1.5
.1.3.6.1.4.1.9.9.76.1.3.1.1.6
.1.3.6.1.4.1.9.9.76.1.3.1.1.7
.1.3.6.1.4.1.9.9.76.1.3.1.1.8
.1.3.6.1.4.1.9.9.76.1.3.1.1.9
.1.3.6.1.4.1.9.9.76.1.4
.1.3.6.1.4.1.9.9.76.1.4.1
.1.3.6.1.4.1.9.9.76.1.4.1.1
.1.3.6.1.4.1.9.9.76.1.4.1.1.1
.1.3.6.1.4.1.9.9.76.1.4.1.1.10
.1.3.6.1.4.1.9.9.76.1.4.1.1.2
.1.3.6.1.4.1.9.9.76.1.4.1.1.3
.1.3.6.1.4.1.9.9.76.1.4.1.1.4
Integer32
.1.3.6.1.4.1.9.9.76.1.4.1.1.5
Enumeration
.1.3.6.1.4.1.9.9.76.1.4.1.1.6
.1.3.6.1.4.1.9.9.76.1.4.1.1.7
.1.3.6.1.4.1.9.9.76.1.4.1.1.8
.1.3.6.1.4.1.9.9.76.1.4.1.1.9
.1.3.6.1.4.1.9.9.76.2
.1.3.6.1.4.1.9.9.76.2.1
.1.3.6.1.4.1.9.9.76.2.2
Dependencies (10) 6 direct · 4 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (2)
SAP
OctetString range: 1
OctetString range: 1
Conformance Groups (4)
The frasBnnSdlcGroup defines objects
which are common to the BNN SDLC of all
compliant connections.
.1.3.6.1.4.1.9.9.76.2.2.1
The frasBnnLlcGroup defines objects
which are common to the BNN LLC of all
compliant connections.
.1.3.6.1.4.1.9.9.76.2.2.2
The frasBanSdlcGroup defines objects
which are common to the BAN SDLC of all
compliant connections.
.1.3.6.1.4.1.9.9.76.2.2.3
The frasBanLlcGroup defines objects
which are common to the BAN LLC of all
compliant connections.
.1.3.6.1.4.1.9.9.76.2.2.4
Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.76.2.1.1
The core compliance statement for all FRAS connections.
Required groups