CISCO-DIAL-CONTROL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
22

cCallHistoryTable

table
.1.3.6.1.4.1.9.10.25.1.4.3 · 1 row entry · 20 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cCallHistoryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAL-CONTROL-MIB::cCallHistoryTable' 
A table containing information about specific
calls to a specific destination.
cCallHistoryEntry row .1.3.6.1.4.1.9.10.25.1.4.3.1
The information regarding a single Connection.
Indexes
Column Syntax OID
cCallHistoryIndex
A monotonically increasing integer for the sole purpose of
indexing call disconnection events. When it reaches the
maximum value, an extremely unlikely event, the agent wraps
the value back to 1 and may flush existin…
Unsigned32
Constraints:
range: 1-4294967295
 .1.3.6.1.4.1.9.10.25.1.4.3.1.1
cCallHistorySetupTime
The value of sysUpTime when the call setup was started.
This will be useful for an NMS to sort the call history
entry with call setup time. Also, this object
can be useful in finding large delays between the time the
ca…
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.2
cCallHistoryPeerAddress
The number this call was connected to. If the number is
not available, then it will have a length of zero.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.3
cCallHistoryPeerSubAddress
The subaddress this call was connected to. If the subaddress
is undefined or not available, this will be a zero length
string.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.4
cCallHistoryPeerId
This is the Id value of the peer table entry
to which this call was made. If a peer table entry
for this call does not exist, the value of this object
will be zero.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.25.1.4.3.1.5
cCallHistoryPeerIfIndex
This is the ifIndex value of the peer table entry
to which this call was made. If a peer table entry
for this call does not exist, the value of this object
will be zero.
Integer32
Constraints:
range: 0-2147483647
 .1.3.6.1.4.1.9.10.25.1.4.3.1.6
cCallHistoryLogicalIfIndex
This is the ifIndex value of the logical interface through
which this call was made. For ISDN media, this would be
the ifIndex of the B channel which was used for this call.
If the ifIndex value is unknown, the value of…
IF-MIBInterfaceIndexOrZero
Type Constraints:
range: 0..2147483647
Description:
This textual convention is an extension of the
InterfaceIndex convention. The latter defines a greater
than zero value used to identify an interface or interface
sub-layer in the managed system. This extension permits…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.7
cCallHistoryDisconnectCause
The encoded network cause value associated with this call.

The value of this object will depend on the interface type
as well as on the protocol and protocol version being
used on this interface. Some ref…
OctetString
Constraints:
range: 0-4
 .1.3.6.1.4.1.9.10.25.1.4.3.1.8
cCallHistoryDisconnectText
ASCII text describing the reason for call termination.

This object exists because it would be impossible for
a management station to store all possible cause values
for all types of interfaces. It should …
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.9
cCallHistoryConnectTime
The value of sysUpTime when the call was connected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.10
cCallHistoryDisconnectTime
The value of sysUpTime when the call was disconnected.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.10.25.1.4.3.1.11
cCallHistoryCallOrigin
The call origin.
Enumeration
Enumerated Values:
1originate
2answer
3callback
 .1.3.6.1.4.1.9.10.25.1.4.3.1.12
cCallHistoryChargedUnits
The number of charged units for this connection.
For incoming calls or if charging information is
not supplied by the switch, the value of this object
will be zero.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.25.1.4.3.1.13
cCallHistoryInfoType
The information type for this call.
Enumeration
Enumerated Values:
1other
2speech
3unrestrictedDigital
4unrestrictedDigital56
5restrictedDigital
6audio31
7audio7
8video
9packetSwitched
10fax
 .1.3.6.1.4.1.9.10.25.1.4.3.1.14
cCallHistoryTransmitPackets
The number of packets which were transmitted while this
call was active.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.25.1.4.3.1.15
cCallHistoryTransmitBytes
The number of bytes which were transmitted while this
call was active.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.25.1.4.3.1.16
cCallHistoryReceivePackets
The number of packets which were received while this
call was active.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.25.1.4.3.1.17
cCallHistoryReceiveBytes
The number of bytes which were received while this
call was active.
DIAL-CONTROL-MIBAbsoluteCounter32 .1.3.6.1.4.1.9.10.25.1.4.3.1.18
cCallHistoryReleaseSourcedeprecated
Originator of the call release.
Enumeration
Enumerated Values:
1callingPartyInPstn
2callingPartyInVoip
3calledPartyInPstn
4calledPartyInVoip
5internalRelease
6internalCallControlApp
7consoleCommand
8externalRadiusServer
9externalNmsApp
10externalCallControlAgent
 .1.3.6.1.4.1.9.10.25.1.4.3.1.19
cCallHistoryReleaseSrc
Originator of the call release. Indicates the source of
the call release as follows :
1) callingPartyInPstn : Calling party in PSTN.
2) callingPartyInVoip : Calling party in VoIP.
3) calledPartyInPstn : Called party i…
Enumeration
Enumerated Values:
1callingPartyInPstn
2callingPartyInVoip
3calledPartyInPstn
4calledPartyInVoip
5internalReleaseInPotsLeg
6internalReleaseInVoipLeg
7internalCallControlApp
8internalReleaseInVoipAAA
9consoleCommand
10externalRadiusServer
11externalNmsApp
12externalCallControlAgent
13gatekeeper
14externalGKTMPServer
 .1.3.6.1.4.1.9.10.25.1.4.3.1.20

cCallHistoryIecTable

table
.1.3.6.1.4.1.9.10.25.1.4.4 · 1 row entry · 2 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cCallHistoryIecTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-DIAL-CONTROL-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-DIAL-CONTROL-MIB::cCallHistoryIecTable' 
This table contains information about Internal Error
Code(s) (IEC) which caused the call to fail.
cCallHistoryIecEntry row .1.3.6.1.4.1.9.10.25.1.4.4.1
The IEC information regarding a single call.
Indexes
Column Syntax OID
cCallHistoryIecIndex
This object is used to index one or more IECs in the
context of a single call. In most cases there will
only be one IEC when a call fails. However, it is
possible for the software processing the call to
generate mult…
Unsigned32
Constraints:
range: 1-1024
 .1.3.6.1.4.1.9.10.25.1.4.4.1.1
cCallHistoryIec
This object reflects the Internal Error Code.
The format is a string of dotted decimal numbers
composed of the following components:

Version.Entity.Category.Subsystem.Errorcode.Diagnostic

E…
SNMP-FRAMEWORK-MIBSnmpAdminString
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.10.25.1.4.4.1.2