CISCO-COPS-CLIENT-MIB Table View

A list of possible COPS servers that the COPS client will
try to connect to in order of ccopsServerConfigPriority.

ccopsServerConfigEntry row .1.3.6.1.4.1.9.9.140.1.1.4.1

A set of configuration information regarding a single COPS
server from the point of view of a COPS client. The entry
is created and deleted by using ccopsServerConfigStatus.

An entry may not exist in the a…

Indexes

ccopsServerConfigClientType ccopsServerConfigName

Column	Syntax	OID
ccopsServerConfigClientType The type of policies to be retrieved from this server.	CopsClientType Type Values: 1 rsvp 2 provisioning	.1.3.6.1.4.1.9.9.140.1.1.4.1.1
ccopsServerConfigName The IP address or the hostname of a COPS server. If a hostname is used, it will be resolved to an address prior to each attempt to setup a connection to a PDP. If the PEP cannot resolve the hostname, the connection atte…	OctetString Constraints: range: 1-64	.1.3.6.1.4.1.9.9.140.1.1.4.1.2
ccopsServerConfigPriority The priority of this entry relative to other entries. The COPS client will attempt to contact COPS servers for the appropriate Client-Type in the order of their priority values. COPS servers designated by the COPS prot…	Unsigned32r/w Constraints: range: 0-255	.1.3.6.1.4.1.9.9.140.1.1.4.1.3
ccopsServerConfigPort The destination port number to which COPS server messages should be sent. By default the COPS service will be provided on the well-known COPS protocol port number 3288.	Unsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.9.140.1.1.4.1.4
ccopsServerConfigStatus The status of COPS server configuration for a client type. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row becomes active, value in any oth…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.140.1.1.4.1.5

A list of COPS domains for each client type supported in
the device.

ccopsDomainEntry row .1.3.6.1.4.1.9.9.140.1.1.8.1

A set of domain configuration information regarding a
single COPS client type.

An entry will exist for each COPS client type which is
supported in the device.

For each COPS client type supporte…

Indexes

ccopsDomainClientType

Column	Syntax	OID
ccopsDomainClientType The type of COPS client.	CopsClientType Type Values: 1 rsvp 2 provisioning	.1.3.6.1.4.1.9.9.140.1.1.8.1.1
ccopsDomainName The COPS domain which this client type belongs to. This is so that a COPS server supporting multiple domains can push the correct set of domain policies to this device. Zero length name is default. COPS server have a d…	CopsDomainNamer/w Type Constraints: range: 0..31	.1.3.6.1.4.1.9.9.140.1.1.8.1.2

A list of roles.  The number of entries is
determined by ccopsMaxRole.

ccopsRoleEntry row .1.3.6.1.4.1.9.9.140.1.1.9.1

Entry containing COPS-PR role information. The entry is
created, deleted and modified by using ccopsRoleStatus.

There is a maximum on the number of roles which may be
configured per device. In order to ma…

Indexes

ccopsRoleName

Column	Syntax	OID
ccopsRoleName The name of the role. Only roles which were defined in COPS server should be used. COPS server will only supply the policies for those roles defined in its database.	CopsRole Type Constraints: range: 1..31	.1.3.6.1.4.1.9.9.140.1.1.9.1.1
ccopsRoleStatus This object is used to manage creation, deletion and modification of rows in this table. An entry may not exist in the active state unless all objects in the entry have an appropriate value. Once a row be…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.140.1.1.9.1.2

A list of interface entries.  An entry will exist for each
interface which supports COPS-PR feature.

ccopsIfEntry row .1.3.6.1.4.1.9.9.140.1.1.10.1

Entry containing COPS status for a particular interface.

By default each interface has no roles. It then has a role
combination that is the zero length string.

Roles in a role combination for …

Indexes

IF-MIBifIndex

Column	Syntax	OID
ccopsIfRoleCombination A display string, role combination, that is associated with an interface. This is the administratively-desired role combination which represents roles that are currently set by the administrator for a particular interf…	CopsRoleCombinationr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.140.1.1.10.1.1