Standard view Table view

CISCO-COPS-CLIENT-MIB

        This MIB module is for configuration & statistic query
of Common Open Policy Service(COPS) client feature on the Cisco
device.  COPS is a simple client/server model for supporting
policy control over QoS Signaling Protocols and provisioned QoS
resource management.
        
COPS is a simple query and response protocol that can be used to
exchange policy information between a policy server (Policy
Decision Point or PDP) and its clients (Policy Enforcement Points
or PEPs).
Source file
CISCO-COPS-CLIENT-MIB
Last revised
Identity
ciscoCopsClientMIB
Base OID
1.3.6.1.4.1.9.9.140
Imported Objects
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
SNMPv2-CONF MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI MODULE-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC DisplayString RowStatus TEXTUAL-CONVENTION TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-COPS-CLIENT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-COPS-CLIENT-MIB::ciscoCopsClientMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-COPS-CLIENT-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-COPS-CLIENT-MIB::ciscoCopsClientMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (32)
ciscoCopsClientMIB
.1.3.6.1.4.1.9.9.140
ccopsMIBObjects
.1.3.6.1.4.1.9.9.140.1
ccopsGlobalObjects
.1.3.6.1.4.1.9.9.140.1.1
ccopsServerMax
serversUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.1
ccopsIfTable
.1.3.6.1.4.1.9.9.140.1.1.10
ccopsIfEntry
IF-MIBifIndex
 .1.3.6.1.4.1.9.9.140.1.1.10.1
ccopsIfRoleCombination r/w
CopsRoleCombination
 .1.3.6.1.4.1.9.9.140.1.1.10.1.1
ccopsRoleConfigSupported
SNMPv2-TCTruthValue
 .1.3.6.1.4.1.9.9.140.1.1.11
ccopsMaxRole
rolesSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.2
ccopsMaxRoleCombination
role-combinationsSNMPv2-SMIUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.3
ccopsServerConfigTable
.1.3.6.1.4.1.9.9.140.1.1.4
ccopsServerConfigEntry
ccopsServerConfigClientTypeccopsServerConfigName
 .1.3.6.1.4.1.9.9.140.1.1.4.1
ccopsServerConfigClientType
CopsClientType
 .1.3.6.1.4.1.9.9.140.1.1.4.1.1
ccopsServerConfigName
OctetString
 .1.3.6.1.4.1.9.9.140.1.1.4.1.2
ccopsServerConfigPriority r/w
Unsigned32
 .1.3.6.1.4.1.9.9.140.1.1.4.1.3
ccopsServerConfigPort r/w
Unsigned32
 .1.3.6.1.4.1.9.9.140.1.1.4.1.4
ccopsServerConfigStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.140.1.1.4.1.5
ccopsInitialTimeout r/w
secondsUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.5
ccopsTimeoutIncrement r/w
secondsUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.6
ccopsTimeoutMax r/w
secondsUnsigned32
 .1.3.6.1.4.1.9.9.140.1.1.7
ccopsDomainTable
.1.3.6.1.4.1.9.9.140.1.1.8
ccopsDomainEntry
ccopsDomainClientType
 .1.3.6.1.4.1.9.9.140.1.1.8.1
ccopsDomainClientType
CopsClientType
 .1.3.6.1.4.1.9.9.140.1.1.8.1.1
ccopsDomainName r/w
CopsDomainName
 .1.3.6.1.4.1.9.9.140.1.1.8.1.2
ccopsRoleTable
.1.3.6.1.4.1.9.9.140.1.1.9
ccopsRoleEntry
ccopsRoleName
 .1.3.6.1.4.1.9.9.140.1.1.9.1
ccopsRoleName
CopsRole
 .1.3.6.1.4.1.9.9.140.1.1.9.1.1
ccopsRoleStatus r/w
SNMPv2-TCRowStatus
 .1.3.6.1.4.1.9.9.140.1.1.9.1.2
ccopsMIBNotifications
.1.3.6.1.4.1.9.9.140.2
ccopsMIBConformance
.1.3.6.1.4.1.9.9.140.3
ccopsMIBCompliances
.1.3.6.1.4.1.9.9.140.3.1
ccopsMIBGroups
.1.3.6.1.4.1.9.9.140.3.2
Dependencies (7) 5 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CISCO-SMIcisco
  3. SNMPv2-TCrfc
  4. IANAifType-MIBrfc
  5. SNMPv2-CONFrfc
  6. SNMPv2-MIBrfc
  7. IF-MIBrfc
  8. CISCO-COPS-CLIENT-MIBciscoselected
Type Definitions (4)
CopsClientType
Enumeration
rsvp(1)
provisioning(2)
CopsDomainName
OctetString range: 0..31
CopsRole
OctetString range: 1..31
CopsRoleCombination
OctetString range: 0..255
Conformance Groups (3)
ccopsGlobalGroup deprecated
ccopsServerMax ccopsServerConfigPriority ccopsServerConfigPort ccopsServerConfigStatus ccopsInitialTimeout ccopsTimeoutIncrement ccopsTimeoutMax ccopsDomainName ccopsMaxRole ccopsMaxRoleCombination ccopsRoleStatus ccopsIfRoleCombination
A collection of objects providing the COPS ability on the
device. Devices implementing the COPS client feature should
support this group.
 .1.3.6.1.4.1.9.9.140.3.2.1
ccopsGlobalGroupRev2
ccopsServerMax ccopsServerConfigPriority ccopsServerConfigPort ccopsServerConfigStatus ccopsInitialTimeout ccopsTimeoutIncrement ccopsTimeoutMax ccopsDomainName ccopsMaxRoleCombination ccopsIfRoleCombination ccopsRoleConfigSupported
A collection of objects providing the COPS ability on the
device.
 .1.3.6.1.4.1.9.9.140.3.2.2
ccopsRoleGroup
ccopsMaxRole ccopsRoleStatus
A collection of objects which allow an agent to require
a limited set of allowed roles be specified, and to reject
any role-combination containing any other role.
 .1.3.6.1.4.1.9.9.140.3.2.3
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.140.3.1.1
The compliance statement for the CISCO-COPS-CLIENT-MIB.
Required groups
mandatory ccopsGlobalGroup

OID .1.3.6.1.4.1.9.9.140.3.1.2
The compliance statement for the CISCO-COPS-CLIENT-MIB.
Required groups
mandatory ccopsGlobalGroupRev2
optional ccopsRoleGroup This group is mandatory in agents for which the value of
ccopsRoleConfigSupported is 'true'.