CISCO-CNO-SWITCH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
12
.1.3.6.1.4.1.9.10.43.1.3.1 · 1 row entry · 10 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnosPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CNO-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CNO-SWITCH-MIB::cnosPortTable'
A list of configuration entries for individually
switched ports. There in one entry created
automatically for each switch port (ifType of
		 ethernetCsmacd) on the device.
cnosPortEntry row .1.3.6.1.4.1.9.10.43.1.3.1.1
Configuration parameters for an individually
switched port.
Column Syntax OID
Returns the revision number of the port controller.
Integer32
Constraints:
range: 0-2147483647
.1.3.6.1.4.1.9.10.43.1.3.1.1.1
A descriptive string of up to 80 characters used by
the network administrator to name a port.
OctetStringr/w
Constraints:
range: 0-80
.1.3.6.1.4.1.9.10.43.1.3.1.1.2
Set to fullDuplex(1) to operate in full duplex mode:
port will allow simultaneous transmit and receive
which can double its bandwidth. Set to halfDuplex(2)
to operate in normal mode. Set to autoNegotiate(3) to
allow the…
Enumerationr/w
Enumerated Values:
1fullDuplex
2halfDuplex
3autoNegotiate
.1.3.6.1.4.1.9.10.43.1.3.1.1.3
The operating duplex mode of the switched port.
Enumeration
Enumerated Values:
1fullDuplex
2halfDuplex
.1.3.6.1.4.1.9.10.43.1.3.1.1.4
Set to tenMbps(1) to operate in 10Mbps speed mode.
Set to oneHundredMbps(2) to operate in 100Mbps speed
mode. Set to autoNegotiate(3) to allow the switch
to negotiate with the other end of the connection.
Enumerationr/w
Enumerated Values:
1tenMbps
2oneHundredMbps
3autoNegotiate
.1.3.6.1.4.1.9.10.43.1.3.1.1.5
The operating speed of the switched port.
Enumeration
Enumerated Values:
1tenMbps
2oneHundredMbps
.1.3.6.1.4.1.9.10.43.1.3.1.1.6
Set to enabled(1) to forward receive and transmit
frames on this port to the port identified by
cnosSysConfigMonitorPort. Set to disabled(2)
to not monitor frame traffic on this port.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.9.10.43.1.3.1.1.7
The current port link status.
Enumeration
Enumerated Values:
1link
2noLink
.1.3.6.1.4.1.9.10.43.1.3.1.1.8
This object configures the port into the Spanning
Tree port-fast mode. When enabled(1), the STP can
transition the port's state directly from blocking
to forwarding, and vice versa, without going through
the intermediat…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.9.10.43.1.3.1.1.9
Set the port to be a member of a specified VLAN.
Set the port to all(5) to be shared among
all VLANs.
Enumerationr/w
Enumerated Values:
1vlan1
2vlan2
3vlan3
4vlan4
5all
.1.3.6.1.4.1.9.10.43.1.3.1.1.10
.1.3.6.1.4.1.9.10.43.1.4.1 · 1 row entry · 2 columns
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk cnosVlanTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CNO-SWITCH-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CNO-SWITCH-MIB::cnosVlanTable'
Table containing a list of VLANs.
cnosVlanEntry row .1.3.6.1.4.1.9.10.43.1.4.1.1
Information pertaining to a VLAN.
Indexes
Column Syntax OID
Identification of a VLAN entry.
Integer32
Constraints:
range: 1-4
.1.3.6.1.4.1.9.10.43.1.4.1.1.1
The switch implements the 802.1d Spanning Tree
Algorithm & Protocol (STP) on all its port to detect
loops in the bridge topology. The user may, for
any reason, elect to disable the execution of STP,
by setting this obj…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
.1.3.6.1.4.1.9.10.43.1.4.1.1.2