Standard view Table view

CISCO-CIRCUIT-INTERFACE-MIB

        The MIB module to configure the circuit description
for an interface.
The circuit description can be used to describe and
identify circuits on interfaces like ATM,
frame-relay etc.

Source file: CISCO-CIRCUIT-INTERFACE-MIB
Last revised: 9 May 2000, 00:00 UTC
Identity: ciscoCircuitInterfaceMIB
Base OID: 1.3.6.1.4.1.9.9.160

Imported Objects

CISCO-SMI	ciscoMgmt
IF-MIB	ifIndex
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI	MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC	RowStatus

Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity

/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-CIRCUIT-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-CIRCUIT-INTERFACE-MIB::ciscoCircuitInterfaceMIB'

Walk the MIB subtree

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-CIRCUIT-INTERFACE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-CIRCUIT-INTERFACE-MIB::ciscoCircuitInterfaceMIB'

How SNMP, Net-SNMP, MIB paths, and variants work

Objects (10)

ciscoCircuitInterfaceMIB		`.1.3.6.1.4.1.9.9.160`
ciscoCircuitInterfaceMIBObjects		`.1.3.6.1.4.1.9.9.160.1`
cciDescription		`.1.3.6.1.4.1.9.9.160.1.1`
cciDescriptionTable		`.1.3.6.1.4.1.9.9.160.1.1.1`
cciDescriptionEntry	IF-MIBifIndex	`.1.3.6.1.4.1.9.9.160.1.1.1.1`
cciDescr r/w	OctetString	`.1.3.6.1.4.1.9.9.160.1.1.1.1.1`
cciStatus r/w	SNMPv2-TCRowStatus	`.1.3.6.1.4.1.9.9.160.1.1.1.1.2`
ciscoCircuitInterfaceMIBConformance		`.1.3.6.1.4.1.9.9.160.3`
ciscoCircuitInterfaceMIBCompliances		`.1.3.6.1.4.1.9.9.160.3.1`
ciscoCircuitInterfaceMIBGroups		`.1.3.6.1.4.1.9.9.160.3.2`

Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree

CISCO-CIRCUIT-INTERFACE-MIBciscoselected
- CISCO-SMIcisco1 symbol
  - SNMPv2-SMIrfcdefault fallback3 symbols
- IF-MIBrfcdefault fallback1 symbol
  - IANAifType-MIBrfc1 symbol
    - SNMPv2-SMIrfcshared2 symbols
    - SNMPv2-TCrfc1 symbol
      - SNMPv2-SMIrfcshared1 symbol
  - SNMPv2-CONFrfc3 symbols
    - SNMPv2-SMIrfcshared3 symbols
  - SNMPv2-MIBrfc1 symbol
    - SNMPv2-CONFrfcshared3 symbols
    - SNMPv2-SMIrfcshared7 symbols
    - SNMPv2-TCrfcshared3 symbols
  - SNMPv2-SMIrfcshared9 symbols
  - SNMPv2-TCrfcshared8 symbols
- SNMP-FRAMEWORK-MIBrfcdefault fallback1 symbol
  - SNMPv2-CONFrfcshared2 symbols
  - SNMPv2-SMIrfcshared4 symbols
  - SNMPv2-TCrfcshared1 symbol
- SNMPv2-CONFrfcdefault fallbackshared2 symbols
- SNMPv2-SMIrfcdefault fallbackshared2 symbols
- SNMPv2-TCrfcdefault fallbackshared1 symbol

Dependency-first compile order

SNMPv2-SMIrfc
CISCO-SMIcisco
SNMPv2-TCrfc
IANAifType-MIBrfc
SNMPv2-CONFrfc
SNMPv2-MIBrfc
IF-MIBrfc
SNMP-FRAMEWORK-MIBrfc
CISCO-CIRCUIT-INTERFACE-MIBciscoselected

Conformance Groups (1)

ciscoCircuitInterfaceGroup	cciDescr cciStatus The Cisco Circuit Interface MIB objects.	`.1.3.6.1.4.1.9.9.160.3.2.1`

Compliance Statements (1)

OID .1.3.6.1.4.1.9.9.160.3.1.1

The compliance statement for Cisco agents which
implement the Cisco Circuit Interface MIB.

Required groups

mandatory	ciscoCircuitInterfaceGroup