CISCO-CIPCMPC-MIB Table View

This table contains configuration information used to 
define subchannels for the Cisco Multi-Path Channel 
(CMPC) feature on the CMCC card.
          
Each instance of this table is created when a CMPC
sub-channel is configured on the router. When the 
CMPC sub-channel configuration statement is deleted
from the router, the instance represented by this
table is removed.

cipCmpcSubChannelAdminEntry row .1.3.6.1.4.1.9.9.72.1.1.1.1

A list of CMPC configuration values.

Indexes

CISCO-CHANNEL-MIBcipCardEntryIndex CISCO-CHANNEL-MIBcipCardDtrBrdIndex CISCO-CHANNEL-MIBcipCardSubChannelIndex

Column	Syntax	OID
cipCmpcSubChannelAdminPath Channel path for this CMPC instance.	CISCO-CIPCSNA-MIBChannelPathr/w Type Constraints: range: 0..2	.1.3.6.1.4.1.9.9.72.1.1.1.1.1
cipCmpcSubChannelAdminDevice Device address of the subchannel the attached host will use to communicate with this CMPC instance.	CISCO-CIPCSNA-MIBChannelDevicer/w Type Constraints: range: 0..2	.1.3.6.1.4.1.9.9.72.1.1.1.1.2
cipCmpcSubChannelAdminTgName This is the name of the CMPC transmission group. Each CMPC subchannel in the same connection transmission group must have the same TG name	CISCO-CIPTG-MIBChannelTgNamer/w Type Constraints: range: 8	.1.3.6.1.4.1.9.9.72.1.1.1.1.3
cipCmpcSubChannelAdminDirection Specifies whether the CMPC subchannel is for host reads or host writes.	Enumerationr/w Enumerated Values: 1 read 2 write 3 readOrWrite	.1.3.6.1.4.1.9.9.72.1.1.1.1.4
cipCmpcSubChannelAdminTgTransport This object specifies the Transmission Group transport type OID for which this CMPC Sub-Channel instance if configured. When the Transmission Group for this CMPC Sub-Channel instance is not configured,…	SNMPv2-TCTDomain Description: Denotes a kind of transport service. Some possible values, such as snmpUDPDomain, are defined in the SNMPv2-TM MIB module. Other possible values are defined in other MIB modules.	.1.3.6.1.4.1.9.9.72.1.1.1.1.5
cipCmpcSubChannelAdminRowStatus This object is used by a Management Station to create or delete the row entry in the cipCmpcSubChannelAdminTable following the the RowStatus textual convention. Upon successful creation of the row, an Ag…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.72.1.1.1.1.6

This table contains operational information 
for the Cisco Multi-Path Channel (CMPC) 
feature on the CMCC card.

cipCmpcSubChannelOperEntry row .1.3.6.1.4.1.9.9.72.1.1.2.1

A list of CMPC operational and status values. The
entries are created by the Agent. They have
read-only access.

Indexes

No indexes recorded

Column	Syntax	OID
cipCmpcSubChannelOperState Activation state of the CMPC subchannel. shutdown - CMCC interface with this CMPC subchannel configured is shutdown. inactive - CMCC physical channel up, CMPC subchannel has not starte…	Enumeration Enumerated Values: 1 shutdown 2 inactive 3 xid2Pending 4 active 5 activePlus	.1.3.6.1.4.1.9.9.72.1.1.2.1.1
cipCmpcSubChannelOperMaxbfru Maximum number of 4096 byte buffers allowed per channel block I/O on this CMPC subchannel. For host write subchannels, this is the maximum number of 4096 byte buffers the host can write to the CMCC for each channel b…	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.72.1.1.2.1.2

This table contains Operational information 
for each instance of a CMPC Transmission 
Group (TG).
          
Each instance of this table is created for every
CMPC TG with a unique tg-name configured on a 
CMCC card.

cipCmpcTgOperEntry row .1.3.6.1.4.1.9.9.72.1.2.1.1

A list of CMPC TG Operational objects.

Indexes

RFC1213-MIBifIndex cipCmpcTgOperName

Column	Syntax	OID
cipCmpcTgOperName This is the name for this instance of a CMPC transmission group (TG).	CISCO-CIPTG-MIBChannelTgName Type Constraints: range: 8	.1.3.6.1.4.1.9.9.72.1.2.1.1.1
cipCmpcTgOperLastSeqNumFailureCause The last CMPC TG sequence number failure cause. none - No sequence number errors have been detected. blockSeqError - Sequence number received in a …	Enumeration Enumerated Values: 1 none 2 blockSeqError 3 sweepSeqError	.1.3.6.1.4.1.9.9.72.1.2.1.1.2
cipCmpcTgOperLastSeqNumFailureTime This object describes the value of sysUpTime when this CMPC TG last detected a sequence number error. If the CMPC TG has not failed, then this value shall be zero.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.72.1.2.1.1.3
cipCmpcTgOperExpectedReceiveSeqNum This is the sequence number expected from the host by this CMPC TG.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.72.1.2.1.1.4
cipCmpcTgOperLastSeqNumReceived This is the last sequence number received from the host by this CMPC TG.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.72.1.2.1.1.5
cipCmpcTgOperLastSeqNumSent This is the last sequence number sent to the host by this CMPC TG.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.9.72.1.2.1.1.6

This table contains statistical information 
for each instance of a CMPC Transmission 
Group (TG).
          
Each instance of this table is created for every CMPC
TG with a unique tg-name configured on a CMCC card.

cipCmpcTgStatsEntry row .1.3.6.1.4.1.9.9.72.1.2.2.1

A list of CMPC TG statistical objects.

Indexes

No indexes recorded

Column	Syntax	OID
cipCmpcTgStatsConnectReqs Number of connect requests received from the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.1
cipCmpcTgStatsConnectInds Number of connect indications sent to the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.2
cipCmpcTgStatsConnectRsps Number of connect responses received from the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.3
cipCmpcTgStatsConnectCnfms Number of connect confirms sent to the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.4
cipCmpcTgStatsDiscReqs Number of disconnect requests received from the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.5
cipCmpcTgStatsDiscInds Number of disconnect Indications sent to the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.6
cipCmpcTgStatsSweepReqsIn Number of sweep requests received from from the host by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.7
cipCmpcTgStatsSweepReqsOut Number of CMPC sweep requests sent by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.8
cipCmpcTgStatsSweepRspsIn Number of CMPC sweep responses received from VTAM by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.9
cipCmpcTgStatsSweepRspsOut Number of CMPC sweep responses sent by this CMPC TG.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.10
cipCmpcTgStatsWraps Number of times the CMPC sequence number for this TG has wrapped.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.72.1.2.2.1.11