CISCO-CAS-IF-MIB Table View

The CAS/DS0 General Configuration Table for T1/E1.  It
contains the CAS/DS0 related standard configuration 
information for T1/E1.

ccasDs1IfCfgEntry row .1.3.6.1.4.1.9.9.85.1.1.1.1

An entry in the configuration table for each T1/E1.
The entry is created when a T1/E1 hardware is detected.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ccasDs1IfCfgDs0ChannelsConfigurable This object contains the bit map of the available DS0 channel in the DS1. The MSB (most significant bit) is DS0 channel number 1. The missing bytes is default to a value of 0. A 1-bit indicates the channel is available…	OctetString Constraints: range: 0-4	.1.3.6.1.4.1.9.9.85.1.1.1.1.1

The CAS/DS0 Group Standard Configuration Table.  It
contains the general configuration information for the
CAS/DS0 group of T1/E1 interfaces.

ccasGrpCfgEntry row .1.3.6.1.4.1.9.9.85.1.2.1.1.1

A CAS/DS0 group entry. Each entry consists of the CAS
group type and the CAS/DS0 group associated DS0
channels in a T1/E1.
The value of ccasGrpCfgDs0Channels must be specified
with at least one available DS0 channel in …

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasGrpCfgIndex An arbitrary index that uniquely identifies a DS0 group in a T1/E1.	Integer32 Constraints: range: 0-30	.1.3.6.1.4.1.9.9.85.1.2.1.1.1.1
ccasGrpCfgType The Signaling type of the DS0 group. emWinkStart - CAS E&M Wink Start. emWinkStartFgd - CAS E&M Wink Start with Feature group D. emImmedStart - CAS E&M Immediate Start. emDe…	Enumerationr/w Enumerated Values: 1 emWinkStart 2 emWinkStartFgd 3 emImmedStart 4 emDelayDial 5 fxsLoopStart 6 fxsGroundStart 7 sasLoopStart 8 sasGroundStart 9 r2Analog 10 r2Digital 11 r2Pulse 12 p7 13 fxoLoopStart 14 fxoGroundStart 15 fgdOS 16 nullSignaling 17 r1Itu 18 r1Modified 19 r1Turkey 20 fgdEANA 21 emMelImmedStart 22 emMelWink 23 emMelDelayDial 24 fxsMelcas 25 fxoMelcas 26 extsig 27 emLmr	.1.3.6.1.4.1.9.9.85.1.2.1.1.1.2
ccasGrpCfgDs0Channels This object contains the bit map of the selected DS0 channels to be added into this group. The MSB (most significant bit) is DS0 channel number 1. For T1, only higher 24 bits are used to specify the the CAS channels fo…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.9.9.85.1.2.1.1.1.3
ccasGrpCfgRowStatus This object is used to create a new row or modify or delete an existing row in this table. The corresponding instance of ccasGrpCfgType can not be modified while this object has the value 'active'.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.85.1.2.1.1.1.4
ccasGrpCfgServiceType Specify the Service type of the CAS/DS0 group. none - no service type casServSw56 - sw56 service for CAS casServModme - modem service for CAS casServAuto - auto service for CAS sgcp - Simple Gateway Control Protoco…	Enumerationr/w Enumerated Values: 1 none 2 casServSw56 3 casServModem 4 casServAuto 5 sgcp 6 mgcp 7 other 8 trunkingService 9 h248 10 ds0xconn 11 xgcp	.1.3.6.1.4.1.9.9.85.1.2.1.1.1.5

The CAS Group E&M Standard Configuration Table. It
contains the CAS E&M group standard configuration
information of T1/E1.

ccasGrpEMCfgEntry row .1.3.6.1.4.1.9.9.85.1.2.2.1.1

An entry in the configuration table for each CAS E&M
Group in the T1/E1.
The entry is created when the ccasGrpCfgType is
configured as 'em' on a T1/E1 via configuration
command.
The entry is deleted when the CAS Group i…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasGrpEMCfgDialType Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. mf - Multi-Frequency (MF) digit. The default value of this object is dtmf(1).	Enumerationr/w Enumerated Values: 1 dtmf 2 pulse 3 mf	.1.3.6.1.4.1.9.9.85.1.2.2.1.1.1
ccasGrpEMCfgDnisAni Specify the type of Destination Number Identification Service (DNIS) and Automatic Number Identification (ANI) support. MF tone supports both ANI and DNIS services. The DTMF tone only supports both incoming and outgoing…	Bitsr/w Enumerated Values: 0 incomingDnis 1 incomingAni 2 outgoingDnis 3 outgoingAni	.1.3.6.1.4.1.9.9.85.1.2.2.1.1.2
ccasGrpEMCfgLmrMCap The M lead behavior of E&M LMR interface. inact - The m-lead status should be ignored. audio - The m-lead status is used to control generating voice packet. dial - The first m-lead off to on status indicates …	Enumerationr/w Enumerated Values: 1 inact 2 audio 3 dial	.1.3.6.1.4.1.9.9.85.1.2.2.1.1.3
ccasGrpEMCfgLmrECap The E lead behavior of E&M LMR interface. seize - The e-lead used as seize signal. voice - The e-lead status is used to indicate voice packet received or not. inactive -- e-lead is inactive.	Enumerationr/w Enumerated Values: 4 seize 5 voice 6 inactive	.1.3.6.1.4.1.9.9.85.1.2.2.1.1.4
ccasGrpEMCfgAutoGainControl This object is used to enabling or disabling automatic gain control on this interface. AGC allows dsp to adjust the input voice volume and avoid rapid voice volume change.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.2.2.1.1.5

The E&M interface Timing Parameters table. It 
contains the configuration of the various E&M signaling
protocol timing parameters.

ccasGrpEMTmEntry row .1.3.6.1.4.1.9.9.85.1.2.2.2.1

An entry in the E&M Timing Parameters Table for
each E&M interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpEMTmClearWaitDuration Time of Inactive incoming seizure signal to declare call cleared. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this…	millisecondsInteger32r/w Constraints: range: 200-2000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.1
ccasGrpEMTmMaxWinkWaitDuration Maximum wink wait duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this…	millisecondsInteger32r/w Constraints: range: 100-5000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.2
ccasGrpEMTmMaxWinkDuration Maximum wink duration for sending out wink start signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emWinkStart(1) or emWinkStartFgd(2). The default value of this obje…	millisecondsInteger32r/w Constraints: range: 100-3000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.3
ccasGrpEMTmDelayStart Timing of generation of outgoing delayed start signal from detection of incoming seizure. This object is relevant to the interfaces of the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of …	millisecondsInteger32r/w Constraints: range: 20-2000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.4
ccasGrpEMTmMaxDelayDuration Maximum delay signal duration for sending out delay dial signaling. This object is relevant to the interfaces in the CAS group if the ccasGrpCfgType object is emDelayDial(4). The default value of this object is 2000 mi…	millisecondsInteger32r/w Constraints: range: 100-5000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.5
ccasGrpEMTmMinDelayPulseWidth Minimum delay-dial pulse duration for incoming call. If the value of this object is 0, then no delay-dial is sent to the far end for the incoming call. This object is relevant to the interfaces in the CAS group if the c…	millisecondsInteger32r/w Constraints: range: 0-0 range: 140-5000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.6
ccasGrpEMTmDigitDuration Outgoing DTMF/MF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object is 100 …	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.7
ccasGrpEMTmInterDigitDuration Outgoing DTMF/MF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpCfgDialType is dtmf or R2 tone. The default value of this object i…	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.8
ccasGrpEMTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 10 pps.	pulses per secondInteger32r/w Constraints: range: 10-20	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.9
ccasGrpEMTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpCfgDialType is pulse. The default value of this object is 500…	millisecondsInteger32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.10
ccasGrpEMTmVoiceHangover The hangover time used to determine there is no more voice packet arrived. The default value of this object is 250 milliseconds.	millisecondsInteger32r/w Constraints: range: 0-10000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.11
ccasGrpEMTmLmrTeardown LMR port tear down timeout. This object is relevant to the waiting time of teardown call on LMR port. If the value of this object is '-1', then the timeout is disable.	secondsInteger32r/w Constraints: range: -1--1 range: 5-60000	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.12
ccasGrpEMTmPttXmt This object signifies LMR port maximum transmit time. This object is relevant to how long LMR port can continue transmit voice packet without pause.	minutesInteger32r/w Constraints: range: 0-30	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.13
ccasGrpEMTmPttRcv This object signifies LMR port maximum receive time. This object is relevant to how long LMR port can continue receive voice packet without pause.	minutesInteger32r/w Constraints: range: 0-30	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.14
ccasGrpEMTmDelayVoice This object is relevant to how long LMR will delay sending the voice packet to the LMR port.	millisecondsInteger32 Constraints: range: 0-1500	.1.3.6.1.4.1.9.9.85.1.2.2.2.1.15

The CAS Group FXS/SAS Standard Configuration Table.  It
contains the CAS FXS/SAS group standard configuration
information of T1/E1.

ccasGrpLineCfgEntry row .1.3.6.1.4.1.9.9.85.1.2.3.1.1

An entry in the configuration table for each CAS
FXS/SAS Group in the T1/E1.
The entry is created when the ccasGrpCfgType is
configured as 'fxs' or 'sas' on a T1/E1 via
configuration command. The entry is deleted when t…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasGrpLineCfgNumberRings The number of rings detected before closing loop. If the value of this object is 0, then the managed system answers immediately after the interface detects a incoming seizure if the ccasGrpCfgType is 'fxsGroundStart' or…	ringsInteger32r/w Constraints: range: 0-10	.1.3.6.1.4.1.9.9.85.1.2.3.1.1.1
ccasGrpLineCfgSupDisconnect Specifies whether a supervisory disconnect signal will be presented to the interface when the connected party at the interface hangs up. this object is only relevant to the ccasGrpCfgType is fxsLoopStart or sasLoopStar…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.2.3.1.1.2
ccasGrpLineCfgDialType Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1).	Enumerationr/w Enumerated Values: 1 dtmf 2 pulse	.1.3.6.1.4.1.9.9.85.1.2.3.1.1.3

The FXS/SAS interface Timing Parameters table. It
contains the configuration of the various FXS/SAS
signaling protocol timing parameters.

ccasGrpLineTmEntry row .1.3.6.1.4.1.9.9.85.1.2.3.2.1

An entry in the FXS/SAS Timing Parameters Table for
each FXS/SAS interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpLineTmDigitDuration Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 millisecon…	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.3.2.1.1
ccasGrpLineTmInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpLineCfgDialType is dtmf. The default value of this object is 100 mill…	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.3.2.1.2
ccasGrpLineTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 …	pulses per secondInteger32r/w Constraints: range: 10-20	.1.3.6.1.4.1.9.9.85.1.2.3.2.1.3
ccasGrpLineTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is …	millisecondsInteger32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.9.9.85.1.2.3.2.1.4

The FXO/SAO standard configuration table. It contains
FXO/SAO configuration parameters, one entry per FXO/SAO
interface.
The configuration information of this table is set by 
its default setting when the CAS group is created by 
the configuration commands.

ccasGrpStaCfgEntry row .1.3.6.1.4.1.9.9.85.1.2.4.1.1

An entry in the standard configuration table for
each FXO/SAO Group.
The entry is created when the ccasGrpCfgType is
configured as 'fxo' or 'sao' on a T1/E1 via
configuration command. The entry is deleted when the
CAS G…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasGrpStaCfgNumberRings The number of rings sent before sending reorder to the originator and releasing resources. If the value of this object is 0, then sending reorder to the originator is disabled. The default value of this object is 20 ri…	ringsInteger32r/w Constraints: range: 0-1000	.1.3.6.1.4.1.9.9.85.1.2.4.1.1.1
ccasGrpStaCfgDialType Specify the addressing type of the CAS group. dtmf - Dual Tone Multi-Frequency (DTMF) digit. pulse - dial pulse. The default value of this object is dtmf(1).	Enumerationr/w Enumerated Values: 1 dtmf 2 pulse	.1.3.6.1.4.1.9.9.85.1.2.4.1.1.2

The FXO/SAO interface Timing Parameters table. It 
contains the configuration of the various FXO/SAO
signaling protocol timing parameters.

ccasGrpStaTmEntry row .1.3.6.1.4.1.9.9.85.1.2.4.2.1

An entry in the FXO/SAO Timing Parameters Table for
each FXO/SAO interface.

Indexes

No indexes recorded

Column	Syntax	OID
ccasGrpStaTmDigitDuration Outgoing DTMF digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 millisecond…	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.4.2.1.1
ccasGrpStaTmInterDigitDuration Outgoing DTMF inter-digit duration in milliseconds. This object is not relevant to the addressing timing of the interfaces in the CAS group if ccasGrpStaCfgDialType is dtmf. The default value of this object is 100 milli…	millisecondsInteger32r/w Constraints: range: 50-500	.1.3.6.1.4.1.9.9.85.1.2.4.2.1.2
ccasGrpStaTmPulseRate Outgoing Pulse dialing rate in pulses per second (pps). This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is 10 …	pulses per secondInteger32r/w Constraints: range: 10-20	.1.3.6.1.4.1.9.9.85.1.2.4.2.1.3
ccasGrpStaTmPulseInterDigitDuration Outgoing Pulse dialing inter-digit timing in milliseconds. This object is relevant to the addressing timing of the interfaces in the CAS group only if ccasGrpStaCfgDialType is pulse. The default value of this object is …	millisecondsInteger32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.9.9.85.1.2.4.2.1.4

The CAS group custom ABCD bits configuration table for
E1. It contains A/B/C/D bits handling objects, one
entry per CAS group on an E1 interface.

ccasGrpABCDCfgEntry row .1.3.6.1.4.1.9.9.85.1.2.5.1.1

An entry in the custom ABCD configuration table for
each CAS Group on an E1 interface.
The entry is created when a CAS group is configured
on a E1. The entry is deleted when the CAS Group is
de-configured from E1.

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasGrpABCDCfgInvertBits Specify the A/B/C/D bit mask to invert the A/B/C/D bits value before the A/B/C/D bits are sent or after the A/B/C/D bits are received. 1-bit - enable bit inversion. 0-bit - disable bit inversion. The default value of…	Bitsr/w Enumerated Values: 0 dBit 1 cBit 2 bBit 3 aBit	.1.3.6.1.4.1.9.9.85.1.2.5.1.1.1
ccasGrpABCDCfgUnusedBits Specify the Unused A/B/C/D bit values to transmit. If any A/B/C/D bit is unused, the bit values in this object will be used to transmit for the unused A/B/C/D bits. The default value of this object is '00'H	Bitsr/w Enumerated Values: 0 dBit 1 cBit 2 bBit 3 aBit	.1.3.6.1.4.1.9.9.85.1.2.5.1.1.2

The CAS channel Standard Configuration Table.  It
contains the standard configuration information of CAS
channel of T1/E1.

ccasChannelCfgEntry row .1.3.6.1.4.1.9.9.85.1.3.1.1

An entry in the configuration table for each CAS
channel. The entry is created when a CAS channel is
configured on a T1/E1 via configuration command. The
entry is deleted when the CAS channel is de-configured
from T1/E1.

Indexes

IF-MIBifIndex

Column	Syntax	OID
ccasChannelCfgDS1IfIndex the ifIndex of this CAS channel associated T1/E1.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.9.9.85.1.3.1.1.1
ccasChannelCfgGroup The CAS channel associated CAS group number.	Integer32 Constraints: range: 0-30	.1.3.6.1.4.1.9.9.85.1.3.1.1.2
ccasChannelCfgTimeSlot The CAS channel associated T1/E1 timeslot.	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.9.9.85.1.3.1.1.3
ccasChannelCfgBusyOut The CAS channel busyout configuration. true - the CAS channel is busied out. false - the CAS is normal. The default value for this object is 'false'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.3.1.1.4

The CAS channel Status Table.  It contains general 
information about the status of CAS channel.

ccasChannelStatusEntry row .1.3.6.1.4.1.9.9.85.1.3.2.1

An entry in the status table for each CAS channel.

Indexes

No indexes recorded

Column	Syntax	OID
ccasChannelStatusRecvSignalBits The receive ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling bit in the 18th frame dBit - the signaling bit in the 24…	Bits Enumerated Values: 0 dBit 1 cBit 2 bBit 3 aBit	.1.3.6.1.4.1.9.9.85.1.3.2.1.1
ccasChannelStatusBusyOut The CAS channel busyout state. true - the CAS channel is busied out. false - the CAS is normal.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.3.2.1.2
ccasChannelStatusInfoType The Information Transfer Capability for the current or last call. unknown - If since system startup there has been no call on this interface, this object has a value of unknown(1). …	Enumeration Enumerated Values: 1 unknown 2 speech 3 data56 4 audio31 5 audio7 6 video 7 fax 8 modem	.1.3.6.1.4.1.9.9.85.1.3.2.1.3
ccasChannelStatusXmitSignalBits The transmit ABCD signaling bits for the CAS channel. aBit - the signaling bit in the 6th frame bBit - the signaling bit in the 12th frame cBit - the signaling bit in the 18th frame dBit - the signaling bit in the 2…	Bits Enumerated Values: 0 dBit 1 cBit 2 bBit 3 aBit	.1.3.6.1.4.1.9.9.85.1.3.2.1.4

The voice specific configuration Table. It contains
information about the voice related configuration
parameters for a CAS group.

ccasVoiceCfgEntry row .1.3.6.1.4.1.9.9.85.1.4.1.1

An entry in the voice specific configuration table for each
CAS/DS0 group of a DS1.
The entry is created if the associated CAS/DS0 group is
created and the voice hardware is detected to support the
voice capability for…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasVoiceCfgNoiseRegEnable The object indicates whether or not the background noise should be played to fill silence gaps if VAD is activated. The default value of this object is 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.4.1.1.1
ccasVoiceCfgNonLinearProcEnable The object indicates whether or not the Nonlinear Processing is enabled for the interface. The default value of this object is 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.4.1.1.2
ccasVoiceCfgMusicOnHoldThreshold The object specifies the Music On Hold Threshold for the interface. The default value of this object is -38 dBm.	dBmInteger32r/w Constraints: range: -70--30	.1.3.6.1.4.1.9.9.85.1.4.1.1.3
ccasVoiceCfgInGain This object contains the amount of gain inserted at the receiver side of the interface. The input gain settings only define a gain/loss relative to the 0 dB setting. The absolute loss at the 0 dB setting could be implem…	dBInteger32r/w Constraints: range: -6-14	.1.3.6.1.4.1.9.9.85.1.4.1.1.4
ccasVoiceCfgOutAttn This object contains the amount of attenuation inserted at the transmit side of the interface. The output attenuation settings only define a loss relative to the 0 dB setting. The absolute loss at the 0 dB setting cou…	dBInteger32r/w Constraints: range: 0-14	.1.3.6.1.4.1.9.9.85.1.4.1.1.5
ccasVoiceCfgEchoCancelEnable The object specifies whether or not the Echo Cancellation is enabled for the interface. The default value of this object is 'true'.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.9.85.1.4.1.1.6
ccasVoiceCfgEchoCancelCoverage The object specifies the Echo Canceller coverage for the interface. This object is valid if the ccasVoiceCfgEchoCancelEnable object is 'true'. echoCanceller8ms - 8 milliseconds echo canceller coverage. echoCanceller16…	Enumerationr/w Enumerated Values: 1 echoCanceller8ms 2 echoCanceller16ms 3 echoCanceller24ms 4 echoCanceller32ms 5 echoCanceller64ms 6 echoCanceller128ms	.1.3.6.1.4.1.9.9.85.1.4.1.1.7
ccasVoiceCfgConnectionMode The object indicates the connection mode of the interface. normal - the interface acts normally to handle incoming and outgoing call. trunk - the interface acts in trunking mode. trunking mode causes …	Enumerationr/w Enumerated Values: 1 normal 2 trunk 3 plar	.1.3.6.1.4.1.9.9.85.1.4.1.1.8
ccasVoiceCfgConnectionNumber This is the E.164 phone number that is used to establish connection with trunking mode or PLAR mode. If the ccasVoiceCfgConnectionMode is 'normal', then this object will be a zero length string.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.9.85.1.4.1.1.9
ccasVoiceCfgInitialDigitTimeOut This is the initial digit timeout that indicates the amount of time the managed system waits for an initial input digit from the caller. The timer is activated when the call is accepted and is deactivated upon digit inp…	secondsInteger32r/w Constraints: range: 0-120	.1.3.6.1.4.1.9.9.85.1.4.1.1.10
ccasVoiceCfgInterDigitTimeOut This is the inter-digit timeout that indicates the amount of time the managed system waits for a subsequent input digit from the caller. The timer is started upon receipt of an input digit and restarted as each digit is…	secondsInteger32r/w Constraints: range: 0-120	.1.3.6.1.4.1.9.9.85.1.4.1.1.11
ccasVoiceCfgRegionalTone This object contains the current regional setting for the call progress tone to be used by this CAS group.	CISCO-TCCountryCoder/w Type Constraints: range: 0 range: 2	.1.3.6.1.4.1.9.9.85.1.4.1.1.12

The XGCP configuration Table contains
information about DS0 usage by XGCP(SGCP/MGCP).  
          
XGCP is meant to represent both Simple Gateway Control
Protocol (SGCP) and Media Gateway Control Protocol (MGCP).

ccasXgcpCfgEntry row .1.3.6.1.4.1.9.9.85.1.5.1.1

An entry in the configuration table for each
DS0 group of a DS1.

The entry is created if the DS0 group is configured as
null-signaling and ccasGrpCfgServiceType is configured
as either sgcp or mgcp.
…

Indexes

IF-MIBifIndex ccasGrpCfgIndex

Column	Syntax	OID
ccasXgcpCfgCotToneCo1 This object specifies the continuity test tone frequencies for co1. Co1 is the COT tone frequency from the terminating switch in transponder mode and is from the originating switch in loopback mode.	hertzInteger32r/w Constraints: range: 280-3800	.1.3.6.1.4.1.9.9.85.1.5.1.1.1
ccasXgcpCfgCotToneCo2 This object specifies the continuity test tone frequencies for co2. Co2 is the COT tone frequency from the originating switch only in transponder mode.	hertzInteger32r/w Constraints: range: 280-3800	.1.3.6.1.4.1.9.9.85.1.5.1.1.2