CISCO-CABLE-ADMISSION-CTRL-MIB Table View

This table abstracts a sparse matrix of system 
resource utilization thresholds to be monitored
by Cable Admission Control.
          
The entPhysicalIndex uniquely identifies the physical 
entity with a set of system resource utilization
thresholds being associated.
          
The ccacSysRscConfigResourceType identifies the system
resource to be monitored.
          
The physical entities, for example, processors
or linecards, are being expanded upon, and the
expansion entails zero or more sets of system
resource utilization thresholds.
          
The agent creates/destroys/modifies an entry whenever
the local console affects this configuration.
          
The management application may create/destroy/modify
an entry.
          
When an entry is created and ccacSysRscConfigStatus is 
equal to 'active', CMTS monitors the system
resources based on the configurable thresholds, minor,
major and critical for different monitoring system
resources type and the main processor or a linecard.

ccacSysRscConfigEntry row .1.3.6.1.4.1.9.9.450.1.2.1.1

Each entry defines a set of configurable thresholds,
for each monitoring system resources type and the main
processor or a linecard.

Indexes

ENTITY-MIBentPhysicalIndex ccacSysRscConfigResourceType

Column	Syntax	OID
ccacSysRscConfigResourceType This object specifies the type of system resource being monitored.	CcacSysRscMonitoredType Type Values: 1 cpu5Sec 2 cpu1Min 3 procMem 4 ioMem 5 totalMem	.1.3.6.1.4.1.9.9.450.1.2.1.1.1
ccacSysRscConfigStatus This object facilitates the creation, modification, and destruction of a conceptual row in this table.	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.450.1.2.1.1.2
ccacSysRscConfigMinorThreshold This object specifies minor threshold related to the utilization of the resource being monitored.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.1.1.3
ccacSysRscConfigMajorThreshold This object specifies major threshold related to the utilization of the resource being monitored. The major threshold must be greater than minor threshold.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.1.1.4
ccacSysRscConfigCritThreshold This object specifies critical threshold related to the utilization of the resource being monitored. The critical threshold must be greater than major threshold. The CMTS will reject reque…	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.1.1.5

This table abstracts a sparse matrix of upstream
channel utilization thresholds to be monitored
by Cable Admission Control.
          
The ifIndex uniquely identifies all upstream channels,
upstream channels associated with an interface or
an upstream channel with a set of upstream channel 
utilization thresholds being associated.
          
The ccacUsConfigRevAppBucketIndex identifies the application
bucket number being configured.
          
The agent creates/destroys/modifies an entry whenever
the local console affects this configuration.
          
The management application may create/destroy/modify
an entry.
          
When an entry is created and ccacUsConfigRevStatus is equal
to 'active', CMTS monitors the upstream channel bandwidth
utilization based on the configurable thresholds, minor,
major and exclusive percentage, for different scheduling
type or service class for an upstream channel.

ccacUsConfigRevEntry row .1.3.6.1.4.1.9.9.450.1.2.4.1

Each entry defines a set of configurable thresholds
and parameters for each monitored scheduling service
for an upstream channel.

A set of thresholds applied by cable admission control
in the process of mon…

Indexes

ccacUsConfigRevIfIndex ccacUsConfigRevAppBucketIndex

Column	Syntax	OID
ccacUsConfigRevIfIndex The object identities the interface to which the upstream channel thresholds applies: 1. If '0', then the policy applies to all upstream channels being monitored. 2. If the correspondin…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.450.1.2.4.1.1
ccacUsConfigRevAppBucketIndex This object identifies the application bucket number in defining the parameters for bandwidth management.	CcacApplicationBucketType Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.450.1.2.4.1.2
ccacUsConfigRevAppBucketName This object specifies the application bucket name. Application name can be used to label each application bucket and give descriptive information on the type of application. Application buc…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.450.1.2.4.1.3
ccacUsConfigRevMinorThreshold This object specifies the minor threshold related to the utilization of upstream bandwidth.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.4.1.4
ccacUsConfigRevMajorThreshold This object specifies the major threshold related to the utilization of upstream bandwidth. The major threshold must be greater than minor threshold.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.4.1.5
ccacUsConfigRevExclusivePercent This object specifies the reserved bandwidth exclusively related to the utilization of upstream bandwidth. The exclusive percent must be greater than major threshold. The sum of exclusive p…	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.4.1.6
ccacUsConfigRevNonExclusivePercent This object specifies the percentage of bandwidth, over and above the exclusive share, which can be used by scheduling service after the exclusive bandwidth has been used up. Since the bandwidth is non-…	Percentr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.450.1.2.4.1.7
ccacUsConfigRevStorageType The storage type for this conceptual row. If the value of this object is 'volatile', then this entry only exists in RAM and the this row would be lost on system reload. If the value of this…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.450.1.2.4.1.8
ccacUsConfigRevStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table. For row creation, ccacUsConfigRevMinorThreshold, ccacUsConfigRevMajorThreshold, ccacUsConfigRevExclusiveP…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.450.1.2.4.1.9

This table abstracts a sparse matrix of downstream
channel utilization thresholds to be monitored
by Cable Admission Control.
          
The ifIndex uniquely identifies all downstream channels,
or a downstream channel with a set of upstream channel 
utilization thresholds being associated.
          
The ccacDsConfigRevAppBucketIndex identifies the application
bucket number being configured.
          
The agent creates/destroys/modifies an entry whenever
the local console affects this configuration.
          
The management application may create/destroy/modify
an entry.
          
When an entry is created and ccacDsConfigRevStatus is equal
to 'active', CMTS monitors the downstream bandwidth
utilization based on the configurable thresholds, minor,
major and exclusive percentage, for different traffic
type for a downstream.

ccacDsConfigRevEntry row .1.3.6.1.4.1.9.9.450.1.2.5.1

Each entry defines a set of configurable thresholds
and parameters for each monitoring traffic type for a
downstream.

A set of thresholds applied by cable admission control
in the process of monitoring down…

Indexes

ccacDsConfigRevIfIndex ccacDsConfigRevAppBucketIndex

Column	Syntax	OID
ccacDsConfigRevIfIndex The object identities the interface to which the downstream thresholds applies: 1. If '0', then the policy applies to all downstream channels being monitored. 2. If the corresponding if…	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.9.9.450.1.2.5.1.1
ccacDsConfigRevAppBucketIndex This object identifies the application bucket number in defining the parameters for policy applies.	CcacApplicationBucketType Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.450.1.2.5.1.2
ccacDsConfigRevAppBucketName This object identifies the application bucket name corresponding to the application bucket number. Application bucket name can be used to label each application bucket and give descriptive information on …	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.9.9.450.1.2.5.1.3
ccacDsConfigRevMinorThreshold This object specifies the minor threshold related to the utilization of downstream bandwidth.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.5.1.4
ccacDsConfigRevMajorThreshold This object specifies the major threshold related to the utilization of downstream bandwidth. The major threshold must be greater than minor threshold.	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.5.1.5
ccacDsConfigRevExclusivePercent This object specifies the reserved bandwidth exclusively related to the utilization of downstream bandwidth. The exclusive percent must be greater than major threshold. The sum of exclusive…	NonZeroPercentr/w Type Constraints: range: 1..100	.1.3.6.1.4.1.9.9.450.1.2.5.1.6
ccacDsConfigRevNonExclusivePercent This object specifies the percentage of bandwidth, over and above the exclusive share, which can be used by this traffic type after the exclusive bandwidth has been used up. Since the bandwidth is non-e…	Percentr/w Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.450.1.2.5.1.7
ccacDsConfigRevStorageType The storage type for this conceptual row. If the value of this object is 'volatile', then this entry only exists in RAM and the this row would be lost on system reload. If the value of this…	SNMPv2-TCStorageTyper/w Type Values: 1 other 2 volatile 3 nonVolatile 4 permanent 5 readOnly Description: Describes the memory realization of a conceptual row. A row which is volatile(2) is lost upon reboot. A row which is either nonVolatile(3), permanent(4) or readOnly(5), is backed up by stable storage. A row which is …	.1.3.6.1.4.1.9.9.450.1.2.5.1.8
ccacDsConfigRevStatus This object facilitates the creation, modification, or deletion of a conceptual row in this table. For row creation, ccacUsConfigRevMinorThreshold, ccacUsConfigRevMajorThreshold, ccacUsConfigRevExclusiveP…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.9.9.450.1.2.5.1.9

This table contains statistical data relating to
system resource utilization for all configured physical
entities and resource types.

ccacSysRscEntry row .1.3.6.1.4.1.9.9.450.1.3.1.1

Each entry contains objects that support
monitoring of statistical data based on
system resources utilization for a physical entity.

Indexes

ENTITY-MIBentPhysicalIndex ccacSysRscType

Column	Syntax	OID
ccacSysRscType This object indicates the type of system resource being monitored.	CcacSysRscMonitoredType Type Values: 1 cpu5Sec 2 cpu1Min 3 procMem 4 ioMem 5 totalMem	.1.3.6.1.4.1.9.9.450.1.3.1.1.1
ccacSysRscUtilization This object indicates the utilization of the system resource on the physical entity.	Percent Type Constraints: range: 0..100	.1.3.6.1.4.1.9.9.450.1.3.1.1.2
ccacSysRscMinorCrosses This object indicates the number of times system resource utilization on the physical entity has crossed minor threshold specified by ccacSysRscConfigMinorThreshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.1.1.3
ccacSysRscMajorCrosses This object indicates the number of times system resource utilization on the physical entity has crossed major threshold specified by ccacSysRscConfigMajorThreshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.1.1.4
ccacSysRscCriticalCrosses This object indicates the number of times system resource utilization on the physical entity has crossed critical threshold specified by ccacSysRscConfigCritThreshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.1.1.5
ccacSysRscCountersDscTime The value of sysUpTime on the most recent occasion at which all counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsyst…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.450.1.3.1.1.6

This table contains statistical data related to 
upstream channel bandwidth utilization for every 
monitored upstream channel and application bucket.
          
For every upstream channel that is being monitored,
if an application bucket has been configured in
ccacUsConfigRevTable for that upstream channel, there
will be one entry in this table.

ccacUsRevEntry row .1.3.6.1.4.1.9.9.450.1.3.4.1

Each entry contains statistical data on the
bandwidth utilization of a upstream channel with a
specific application bucket number.

Indexes

IF-MIBifIndex ccacUsRevAppBucketIndex

Column	Syntax	OID
ccacUsRevAppBucketIndex This object identifies the application bucket number that is being monitored.	CcacApplicationBucketType Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.450.1.3.4.1.1
ccacUsRevUtilization This object indicates the upstream channel bandwidth utilized by the scheduling service.	TenthPercent Type Constraints: range: 0..1000	.1.3.6.1.4.1.9.9.450.1.3.4.1.2
ccacUsRevMinorCrosses This object indicates the number of times upstream channel bandwidth utilization has crossed minor threshold specified by ccacUsConfigRevMinorThreshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.4.1.3
ccacUsRevMajorCrosses This object indicates the number of times upstream channel bandwidth utilization has crossed major threshold specified by ccacUsConfigRevMajorThreshold.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.4.1.4
ccacUsRevExclusiveCrosses This object indicates the number of times upstream channel bandwidth utilization has crossed exclusive percentage specified by ccacUsConfigRevExclusivePercent.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.4.1.5
ccacUsRevCountersDscTime The value of sysUpTime on the most recent occasion at which all counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsyst…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.450.1.3.4.1.6

This table contains the statistical data related to
downstream bandwidth utilization for every monitored
downstream channel and application bucket. 
          
For every downstream channel that is being monitored,
if an application bucket has been configured in
ccacDsConfigRevTable for that downstream channel,
there will be one entry in this table.

ccacDsRevEntry row .1.3.6.1.4.1.9.9.450.1.3.5.1

Each entry contains statistical data on the
bandwidth utilization of a downstream channel with a
specific application bucket number.

Indexes

IF-MIBifIndex ccacDsRevAppBucketIndex

Column	Syntax	OID
ccacDsRevAppBucketIndex This object identifies the application bucket number that is being monitored.	CcacApplicationBucketType Type Constraints: range: 1..64	.1.3.6.1.4.1.9.9.450.1.3.5.1.1
ccacDsRevUtilization This object indicates the downstream bandwidth utilization.	TenthPercent Type Constraints: range: 0..1000	.1.3.6.1.4.1.9.9.450.1.3.5.1.2
ccacDsRevMinorCrosses This object indicates the number of times the minor downstream bandwidth threshold, ccacDsConfigRevMinorThreshold, is crossed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.5.1.3
ccacDsRevMajorCrosses This object indicates the number of times the major downstream bandwidth threshold, ccacDsConfigRevMajorThreshold, is crossed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.5.1.4
ccacDsRevExclusiveCrosses This object indicates the number of times the exclusive percentage, ccacDsConfigRevExclusivePercent, is crossed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.3.5.1.5
ccacDsRevCountersDscTime The value of sysUpTime on the most recent occasion at which all counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsyst…	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.450.1.3.5.1.6

This table contains a history of the monitored
event in which the configured threshold is crossed.
          
The number of most recent notifications will be
saved based on the table size.

ccacEventHistoryEntry row .1.3.6.1.4.1.9.9.450.1.4.3.1

The data corresponding to a monitored
event in which the configured threshold
is crossed.

Indexes

ccacEventHistoryIndex

Column	Syntax	OID
ccacEventHistoryIndex An integer value uniquely identifying the entry in the table. The value of this object starts at '1' and monotonically increases for each condition transition monitored by the agent. If the value of this…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.4.3.1.1
ccacEventThreshObjectInstance The object specifies the instance identifier of a threshold object which was crossed.	SNMPv2-TCVariablePointer Description: A pointer to a specific object instance. For example, sysContact.0 or ifInOctets.3.	.1.3.6.1.4.1.9.9.450.1.4.3.1.2
ccacEventTypeChecked The object specifies the monitored event type when the threshold was crossed.	CcacMonitoredEvent Type Values: 0 dynamicSvcFlow 1 cmRegistration	.1.3.6.1.4.1.9.9.450.1.4.3.1.3
ccacEventResourceUtilization This object specifies the resource utilization when the threshold was crossed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.4.3.1.4
ccacEventThreshCrosses This object specifies the number of times that the threshold was crossed.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.9.450.1.4.3.1.5
ccacEventTimeStamp This object specifies the value of the sysUpTime object at the time the notification was generated.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.9.9.450.1.4.3.1.6