CISCO-C8500-REDUNDANCY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
6

ccrCpuTable

table
.1.3.6.1.4.1.9.9.105.1.1.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccrCpuTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-C8500-REDUNDANCY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-C8500-REDUNDANCY-MIB::ccrCpuTable' 
There is an entry in this table for each slot that
can hold a CPU card.
ccrCpuEntry row .1.3.6.1.4.1.9.9.105.1.1.1.1
Redundancy information for a CPU card.
Indexes
Column Syntax OID
ccrCpuSlotIndex
Identifies a chassis slot.
RedundancySlotIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.9.9.105.1.1.1.1.1
ccrCpuMode
The redundancy mode of this CPU card.
RedundancyModer/w
Type Values:
1active
2standby
3unused
4notPresent
 .1.3.6.1.4.1.9.9.105.1.1.1.1.2
ccrCpuStatus
The operational status of this CPU card.
RedundancyStatus
Type Values:
1notPresent
2ok
3fault
 .1.3.6.1.4.1.9.9.105.1.1.1.1.3

ccrSwitchTable

table
.1.3.6.1.4.1.9.9.105.1.2.1 · 1 row entry · 3 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk ccrSwitchTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-C8500-REDUNDANCY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-C8500-REDUNDANCY-MIB::ccrSwitchTable' 
There is an entry in this table for each slot that
can hold a switch card. A 'switch card' is a card that
contains the ATM switch fabric.
ccrSwitchEntry row .1.3.6.1.4.1.9.9.105.1.2.1.1
Redundancy information for a switch card.
Indexes
Column Syntax OID
ccrSwitchSlotIndex
Identifies a chassis slot.
RedundancySlotIndex
Type Constraints:
range: 1..65535
 .1.3.6.1.4.1.9.9.105.1.2.1.1.1
ccrSwitchMode
The redundancy mode of this switch card.
RedundancyModer/w
Type Values:
1active
2standby
3unused
4notPresent
 .1.3.6.1.4.1.9.9.105.1.2.1.1.2
ccrSwitchStatus
The operational status of this switch card.
RedundancyStatus
Type Values:
1notPresent
2ok
3fault
 .1.3.6.1.4.1.9.9.105.1.2.1.1.3