CISCO-ATM-TRUNK-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
6
Rows
6
Columns
72

catmtCidTable

table
.1.3.6.1.4.1.9.9.351.1.1.1 · 1 row entry · 16 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtCidTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtCidTable' 
This table is used to establish the mapping of one or more 
DS0 channels from a single DS1 interface to an AAL2 connection 
identified by a Channel IDentification number(CID). 
          
This table is created and used for ATM AAL2 trunking 
applications including both voice and data.
catmtCidEntry row .1.3.6.1.4.1.9.9.351.1.1.1.1
An entry in the catmtCidTable.
Each entry represents an AAL2 trunking connection which
is uniquely identified by the PVC index and the CID number.

An AAL2 trunking connection is established by binding
one…
Indexes
Column Syntax OID
catmtCidVpi
This object is the VPI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.351.1.1.1.1.1
catmtCidVci
This object is the VCI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.351.1.1.1.1.2
catmtCid
This object is the CID of an ATM AAL2 connection,
it is unique within a PVC or SVC connection.

The CID number at both sides of an AAL2 connection
must be the same.

Value of 0 is not used, …
Integer32
Constraints:
range: 8-255
 .1.3.6.1.4.1.9.9.351.1.1.1.1.3
catmtCidDs1
The value of this object equals to the 'ifIndex' of the
DS1 interface.

This object is mandatory when adding a CID entry. Once a
CID entry is added, this object can not be modified.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.9.9.351.1.1.1.1.4
catmtCidDs0GroupIndex
An arbitrary index that uniquely identifies a DS0 group
which contains one or more DS0(s) within a DS1 interface
specified by 'catmtCidDs1'.

This object is mandatory when adding a CID entry. Once a
CID…
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.9.351.1.1.1.1.5
catmtCidProfileType
This object specifies the type of the AAL2 CODEC profile.
The combination of the profile type and profile number
specified by 'catmtCidProfileNumber' defines an AAL2
CODEC profile.

This parameter is man…
CISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileTyper/w
Type Values:
1itu
2custom
 .1.3.6.1.4.1.9.9.351.1.1.1.1.6
catmtCidProfileNumber
This object specifies the AAL2 CODEC profile number.
The combination of profile type and profile number defines
an AAL2 CODEC profile.

A profile contains one or more entries, with each entry
specifying…
CISCO-VOICE-AALX-PROFILE-MIBCiscoAal2ProfileNumberr/w
Type Values:
1profileITU1
2profileITU2
3profileITU3
7profileITU7
8profileITU8
12profileITU12
100profileCustom100
101profileCustom101
110profileCustom110
200profileCustom200
210profileCustom210
 .1.3.6.1.4.1.9.9.351.1.1.1.1.7
catmtCidVoiceCodec
This object specifies the CODEC type used for the AAL2
trunking connection.

The following table lists the CODEC types specified
in each profile table by ITU I.366.2 standard.

------------…
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcSpeechCoderRater/w
Type Values:
1g729r8000
2g729Ar8000
3g726r16000
4g726r24000
5g726r32000
6g711ulawr64000
7g711Alawr64000
8g728r16000
9g723r6300
10g723r5300
11gsmr13200
12g729Br8000
13g729ABr8000
14g723Ar6300
15g723Ar5300
16g729IETFr8000
17gsmeEr12200
18clearChannel
19g726r40000
20llcc
21gsmAmrNb
22iLBC
23iLBCr15200
24iLBCr13330
25g722r4800
26g722r5600
27g722r6400
28iSAC
29aaclc
30aacld
 .1.3.6.1.4.1.9.9.351.1.1.1.1.8
catmtCidVBDCodec
This object specifies the CODEC type to be used for Voice
Band Data (VBD) upspeed.

Upspeed is to change the transmission rate of a voice
interface to a higher rate of CODEC type for fax/modem
transportati…
CISCO-VOICE-COMMON-DIAL-CONTROL-MIBCvcCoderTypeRater/w
Type Values:
1other
2fax2400
3fax4800
4fax7200
5fax9600
6fax14400
7fax12000
10g729r8000
11g729Ar8000
12g726r16000
13g726r24000
14g726r32000
15g711ulawr64000
16g711Alawr64000
17g728r16000
18g723r6300
19g723r5300
20gsmr13200
21g729Br8000
22g729ABr8000
23g723Ar6300
24g723Ar5300
25ietfg729r8000
26gsmeEr12200
27clearChannel
28g726r40000
29llcc
30gsmAmrNb
31g722
32iLBC
33iLBCr15200
34iLBCr13330
35g722r4800
36g722r5600
37g722r6400
38iSAC
39aaclc
40aacld
 .1.3.6.1.4.1.9.9.351.1.1.1.1.9
catmtCidNx64Enable
This object specifies whether a CID entry is in the Nx64
packet stream mode.

When this object is set to 'false', the CID connection is
for voice trunking applications only; when it is set to
'true', th…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.351.1.1.1.1.10
catmtCidNx64Profile
This object specifies the Nx64 data profile for an AAL2
data trunking connection.

The value of this object is a valid index of the
cdapNx64ProfileTable in the CISCO-DATA-AALX-PROFILE-MIB.
…
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.351.1.1.1.1.11
catmtCidStateBitMap
This object is used to indicate the state of the CID.

All bits setting to 0 which means status 'okay'.
Bits
Enumerated Values:
0pvcAdminDown
1pvcFailure
2extAIS
3extRAI
4aal2ConnAIS
5aal2ConnRDI
6lineAlarm
 .1.3.6.1.4.1.9.9.351.1.1.1.1.12
catmtCidRepetition
This object is used to repeatedly apply the writable objects
of catmtCidTable specified in the same SNMP PDU starting
from the row defined by the index object for the number of
rows specified by this object.
…
CISCO-TCConfigIteratorr/w
Type Constraints:
range: 1..4294967295
 .1.3.6.1.4.1.9.9.351.1.1.1.1.13
catmtCidRepetitionOwner
This object is used for error reporting of the bulk
provisioning operation specified by catmtCidRepetition.

The value of this object is set by the SNMP manager with its
own identifier at the time of set…
RMON-MIBOwnerStringr/w
Type Constraints:
range: 0..127
 .1.3.6.1.4.1.9.9.351.1.1.1.1.14
catmtCidRepetitionResult
This object indicates the result of the bulk provisioning
specified in catmtCidRepetition.

The format might look at (but not limited to):
'COMPLETION=<number of rows completed before any error
occu…
CISCO-TCBulkConfigResult
Type Constraints:
range: 0..255
 .1.3.6.1.4.1.9.9.351.1.1.1.1.15
catmtCidRowStatus
This object is used for adding/deleting the entries from the
catmtCidTable.

In order to create a CID entry, the following parameters are
mandatory and must be provided:

For voice trunkin…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.351.1.1.1.1.16

catmtCidStatsTable

table
.1.3.6.1.4.1.9.9.351.1.2.1 · 1 row entry · 22 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtCidStatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtCidStatsTable' 
This table contains the statistical information 
on a per CID connection basis for AAL2 Trunking
applications.
catmtCidStatsEntry row .1.3.6.1.4.1.9.9.351.1.2.1.1
This table contains statistical information for an AAL2
connection. Each entry in this table corresponds to an AAL2
bearer connection that has been setup by mapping one or
more DS1/DS0s to an AAL2 connection identif…
Indexes
Column Syntax OID
catmtCidSentPackets
This object indicates the number of packets sent towards
network side since the connection setup.
packetsCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.1
catmtCidRcvdPackets
This object indicates the count of packets received
from network side since the connection setup.
packetsCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.2
catmtCidSentOctets
This object indicates the count of bytes sent towards
network side since connection setup.
bytesCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.3
catmtCidRcvdOctets
This object indicates the count of bytes received from
network since connection setup.
bytesCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.4
catmtCidLostPackets
This object indicates the count of packets lost in
the egress direction (from the network).

This number is computed based on the expected number
of packets and the actual number of packets arrived
fro…
packetsCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.5
catmtCidJitter
This object indicates the jitter (a.k.a interarrival jitter).
This value is determined by the gateway DSP and obtained by
the processor running on gateway upon querying the DSP
periodically.
millisecondsUnsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.351.1.2.1.1.6
catmtCidExtAISCnts
This object contains the number of external AIS AAL2 Type3
packets received.

External AIS : alarm indication signal associated with
a maintenance alarm detected on a defective maintenance
span, th…
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.7
catmtCidExtRAICnts
This object contains the number of external RAI AAL2 Type3
packets received.

External RAI is transmitted upstream from an entity that
has detected defects persisting long enough to constitute
a receive…
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.8
catmtCidConnAISCnts
This object contains the number of external connection AIS
AAL2 packets received.

External Conn AIS is a Alarm Indicating Signal transmitted
in the downstream direction from the AAL2 connecting point
t…
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.9
catmtCidConnRDICnts
This object contains the number of external connection
RDI AAL2 packets received.

External Connection RDI - is a signal transmitted in the
upstream direction by an AAL2 endpoint that is in alarm
state…
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.10
catmtCidNx64FramesTxToTDM
This object contains the number of frames transmitted
to the TDM interface.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.11
catmtCidNx64FramesRxFromTDM
This object contains the number of frames received from
the TDM interface.

This object is only applicable when catmtCidNx64Mode is
set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.12
catmtCidNx64EncBytesTxToTDM
This object contains the number of encoded bytes
transmitted to the TDM interface.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.13
catmtCidNx64EncBytesRxFromTDM
This object contains the number of encoded bytes
received from the TDM interface.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.14
catmtCidNx64InvalidFCSFrames
This object contains the number of invalid frames
received with invalid Frame Check Sequence (FCS) error.

This object is only applicable when catmtCidNx64Mode is
set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.15
catmtCidNx64AbortSeqFrames
This object contains the number of invalid frames
received with invalid frame abort sequence error.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.16
catmtCidNx64InvalidShortFrames
This object contains the number of invalid short
frames (length less than minimum length) received.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.17
catmtCidNx64InvalidLongFrames
This object contains the number of invalid long
frames (length greater than maximum length) received.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.18
catmtCidNx64NoByteAlignErrorFrames
This object contains the number of invalid frames
received with no byte alignment.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.19
catmtCidNx64RASTimeOutFrames
This object contains the number of frames received
with RAS timer timeout.

This object is only applicable when catmtCidNx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.2.1.1.20
catmtCidLastResetTime
This object contains the value of sysUpTime when the
last counter reset occurred.

If no counter reset has occurred since the last time
connection is established, this object will contain
value of zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.351.1.2.1.1.21
catmtCidCounterClear
When this object is set to value of true(1), all statistics
counters with type of Counter32SinceReset in the table
catmtCidStatsTable will be reset to zero.

Setting this object to a value of false(2) has…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.351.1.2.1.1.22

catmtAal1Table

table
.1.3.6.1.4.1.9.9.351.1.3.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtAal1Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtAal1Table' 
This table is used to establish the mapping of a 
DS0 to an AAL1 ATM connection.
          
This table is created and used for ATM AAL1 trunking 
applications only.
catmtAal1Entry row .1.3.6.1.4.1.9.9.351.1.3.1.1
An entry in the catmtAal1Table.

Each entry represents an AAL1 trunking connection which
is uniquely identified by the PVC index.

An AAL1 trunking connection is established by binding
one or m…
Indexes
Column Syntax OID
catmtAal1Vpi
This object is the VPI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.351.1.3.1.1.1
catmtAal1Vci
This object is the VCI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.351.1.3.1.1.2
catmtAal1Ds1
The value of this object is equivalent to the 'ifIndex'
of the DS1 interface.

This object is mandatory when adding an AAL1 entry.
Once an AAL1 entry is added, this object can not be
modified.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.9.9.351.1.3.1.1.3
catmtAal1Ds0GroupIndex
An arbitrary index that uniquely identifies one or a group
of DS0s to be connected to an AAL1 trunking connection.

When catmtAal1Nx64Enable is set to 'false', the AAL1
trunking connection can only be a …
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.9.351.1.3.1.1.4
catmtAal1Nx64Profile
This object specifies the Nx64 AAL1 data profile for an AAL1
trunking connection.

The value of this object is a valid index of
cdapNx64Aal1ProfileTable in CISCO-DATA-AALX-PROFILE-MIB.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.351.1.3.1.1.5
catmtAal1RowStatus
This object is used for adding/deleting the entries from
the catmtAal1Table.

In order to create an AAL1 trunking entry, the following
parameters are mandatory and must be provided:
catmtAal1Ds…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.351.1.3.1.1.6

catmtAal1StatsTable

table
.1.3.6.1.4.1.9.9.351.1.4.1 · 1 row entry · 7 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtAal1StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtAal1StatsTable' 
This table contains the statistics information 
on a per AAL1 connection basis for ATM AAL1 
Trunking applications.
catmtAal1StatsEntry row .1.3.6.1.4.1.9.9.351.1.4.1.1
This table contains statistics information for an AAL1
trunking connection.

Each entry in this table corresponds to an AAL1 connection
that has been setup by binding an DS0 to an AAL1 connection
identif…
Indexes
Column Syntax OID
catmtAal1TxCells
This object contains the number of ATM AAL1 cells
transmitted from gateway to ATM network.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.4.1.1.1
catmtAal1RxCells
This object contains the number of ATM AAL1 cells
gateway has received from ATM network.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.4.1.1.2
catmtAal1TxPayloadBytes
This object contains the number of payload bytes
transmitted from gateway to ATM network.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.4.1.1.3
catmtAal1RxPayloadBytes
This object contains the number of payload bytes
gateway has received from ATM network.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.4.1.1.4
catmtAal1Jitter
This object indicates the jitter (a.k.a interarrival jitter).

The value of this object is determined by the gateway DSP
and obtained by the processor running on gateway upon querying
the DSP periodicall…
SNMPv2-SMIGauge32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.9.9.351.1.4.1.1.5
catmtAal1LastResetTime
This object contains the value of sysUpTime when the
last counter reset occurred.

If no counter reset has occurred since the last time
system is up, this object will contain value of zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.351.1.4.1.1.6
catmtAal1CounterClear
When this object is set to value of true(1), all statistics
counters with type of Counter32SinceReset in the table
catmtAal1StatsTable will be reset to zero.

Setting this object to value of false(2) has…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.351.1.4.1.1.7

catmtAal5Table

table
.1.3.6.1.4.1.9.9.351.1.5.1 · 1 row entry · 6 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtAal5Table
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtAal5Table' 
This table is used to establish the mapping of a 
DS0 to an AAL5 ATM connection.
          
This table is created and used for ATM AAL5 
trunking applications only.
catmtAal5Entry row .1.3.6.1.4.1.9.9.351.1.5.1.1
An entry in the catmtAal5Table.

Each entry represents an AAL5 trunking connection which
is uniquely identified by the PVC index.

An AAL5 trunking connection is established by binding
a DS0 gr…
Indexes
Column Syntax OID
catmtAal5Vpi
This object is the VPI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-4095
 .1.3.6.1.4.1.9.9.351.1.5.1.1.1
catmtAal5Vci
This object is the VCI value of an ATM PVC connection.
Unsigned32
Constraints:
range: 0-65535
 .1.3.6.1.4.1.9.9.351.1.5.1.1.2
catmtAal5Ds1
The value of this object equals to the 'ifIndex' of
the DS1 interface.

This object is mandatory when adding an AAL5 entry.
Once an AAL5 entry is added, this object can not be
modified.
IF-MIBInterfaceIndexr/w
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
 .1.3.6.1.4.1.9.9.351.1.5.1.1.3
catmtAal5Ds0GroupIndex
An arbitrary index that uniquely identifies a DS0 group
containing one or more DS0 that connect to an AAL5
trunking connection.

This object is mandatory when adding an AAL5 entry. Once
an AAL5 entry is …
Integer32r/w
Constraints:
range: 0-30
 .1.3.6.1.4.1.9.9.351.1.5.1.1.4
catmtAal5Nx64Profile
This object specifies the Nx64 data profile for an AAL5
trunking connection.

The value of this object is a valid index of the
cdapNx64ProfileTable in CISCO-DATA-AALX-PROFILE-MIB.
Integer32r/w
Constraints:
range: 1-65535
 .1.3.6.1.4.1.9.9.351.1.5.1.1.5
catmtAal5RowStatus
This object is used for adding/deleting the entries from
the catmtAal5Table.

In order to create an AAL5 trunking entry, the following
parameters are mandatory and must be provided:
catmtAal5Ds1…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.9.9.351.1.5.1.1.6

catmtAal5StatsTable

table
.1.3.6.1.4.1.9.9.351.1.6.1 · 1 row entry · 15 columns
Open in standard view
Uses the cisco variant from /opt/observium/mibs/cisco.
Command help
Walk catmtAal5StatsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-TRUNK-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-TRUNK-MIB::catmtAal5StatsTable' 
This table contains the statistical information 
on a per AAL5 connection basis for ATM AAL5 
Trunking applications.
catmtAal5StatsEntry row .1.3.6.1.4.1.9.9.351.1.6.1.1
This table contains statistical information for an AAL5
trunking connection.

Each entry in this table corresponds to an AAL5 connection
that has been setup by mapping one or more DS0(s) to an
AAL5 connect…
Indexes
Column Syntax OID
catmtAal5SentPackets
This object indicates the number of packets sent towards
network side since the connection is up.
packetsCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.1
catmtAal5RcvdPackets
This object indicates the count of packets received
from network side since the connection setup.
packetsCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.2
catmtAal5SentOctets
This object indicates the count of bytes sent towards
network side since connection setup.
bytesCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.3
catmtAal5RcvdOctets
This object indicates the count of bytes received from
network since connection setup.
bytesCounter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.4
catmtAal5FramesTxToTDM
This object contains the number of frames transmitted
to the TDM interface.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.5
catmtAal5FramesRxFromTDM
This object contains the number of frames received from
the TDM interface.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.6
catmtAal5EncBytesTxToTDM
This object contains the number of encoded bytes
transmitted to the TDM interface.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.7
catmtAal5EncBytesRxFromTDM
This object contains the number of encoded bytes
received from TDM interface.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.8
catmtAal5InvalidFCSFrames
This object contains the number of invalid frames
received with invalid Frame Check Sequence (FCS)
error.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.9
catmtAal5AbortSeqFrames
This object contains the number of invalid frames
received with invalid frame abort sequence error.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.10
catmtAal5InvalidShortFrames
This object contains the number of invalid short
frames (length less than minimum length) received.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.11
catmtAal5InvalidLongFrames
This object contains the number of invalid long
frames (length greater than maximum length) received.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.12
catmtAal5NoByteAlignErrorFrames
This object contains the number of invalid frames
received with no byte alignment.

This object is only applicable when catmtAal5Nx64Mode
is set to to 'hdlc'.
Counter32SinceReset
Type Constraints:
range: 0..2147483647
 .1.3.6.1.4.1.9.9.351.1.6.1.1.13
catmtAal5LastResetTime
This object contains the value of sysUpTime when the
last counter reset occurred.

If no counter reset has occurred since the last time
system is up, this object will contain value of zero.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.9.9.351.1.6.1.1.14
catmtAal5CounterClear
When this object is set to value of true(1), all statistics
counters with type of Counter32SinceReset in the table
catmtAal5StatsTable will be reset to zero.

Setting this object to a value of false(2) ha…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.9.9.351.1.6.1.1.15