CISCO-ATM-RM-MIB Table View

The (conceptual) table containing Resource Management
configuration information for default Quality of Service
objective values used when a signalling request is received
on a UNI interface.

rmDefaultQosObjectiveEntry row .1.3.6.1.4.1.9.10.10.1.1.4.1

An entry (conceptual row) in the
rmDefaultQosObjectiveTable containing Resource
Management configuration for the default UNI QOS objectives.
Rows are identified by Service Category.

Indexes

rmDefaultQosServiceCategory

Column	Syntax	OID
rmDefaultQosServiceCategory The Service Category to which the row applies.	Enumeration Enumerated Values: 1 cbr 2 vbrRt 3 vbrNrt	.1.3.6.1.4.1.9.10.10.1.1.4.1.1
rmScDefaultQosMaxCtd The default Maximum Cell Transfer Delay (ctd) for the Service Category. It applies only to cbr and vbr-rt Service Categories. Specifying a value of 16777215 signifies that this parameter should not be checked during con…	microsecondsInteger32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.9.10.10.1.1.4.1.2
rmScDefaultQosPeakToPeakCdv The default Peak-to-peak cell delay variation (cdv) for the Service Category. It applies only to cbr and vbr-rt Service Categories. Specifying a value of 16777215 signifies that this parameter should not be checked duri…	microsecondsInteger32r/w Constraints: range: 0-16777215	.1.3.6.1.4.1.9.10.10.1.1.4.1.3
rmScDefaultQosClr The default cell-loss-ratio for the Service Category (for CLP=0 cells only). Specifying a value of 0 signifies that this parameter should not be checked during connection setup. The units of this object are negative pow…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.9.10.10.1.1.4.1.4
rmScDefaultQosClrClp01 The default cell-loss-ratio for the Service Category for CLP=0+1 cells. Specifying a value of 0 signifies that this parameter should not be checked during connection setup. The units of this object are negative powers o…	Integer32r/w Constraints: range: 0-15	.1.3.6.1.4.1.9.10.10.1.1.4.1.5

The (conceptual) table containing Resource Management
information on the cells in the output queues of a
shared-memory output-queued ATM switch.

sharedMemRmSwitchQueuedCellEntry row .1.3.6.1.4.1.9.10.10.1.2.1.1

An entry (conceptual row) in the
sharedMemRmSwitchQueuedCellTable containing Resource
Management information on the cells in the output
queues of a shared-memory switch. Rows are
indexed by priority.

Indexes

sharedMemRmCellPriority

Column	Syntax	OID
sharedMemRmCellPriority The cell priority. The cell priority maps one-to-one to the per-interface queues specified by the sharedMemRmIfOutputQ object. All cells of a connection of a particular Service Category are given a fixed priority. The …	Enumeration Enumerated Values: 1 p1 2 p2 3 p3 4 p4	.1.3.6.1.4.1.9.10.10.1.2.1.1.1
sharedMemRmSwitchQueuedCellLimit Configured limit on the number of cells on all output queues of the switch at any time of a particular priority.	cellsInteger32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.10.1.2.1.1.2
sharedMemRmSwitchQueuedCellCount Count of the number of cells on all output queues of the switch at any time of a particular priority.	cellsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.2.1.1.3

The (conceptual) table containing Resource Management
configuration information for whole ATM interfaces.

rmIfCfgEntry row .1.3.6.1.4.1.9.10.10.1.3.3.1

An entry (conceptual row) in the rmIfCfgTable
containing Resource Management configuration for an ATM
interface. The particular interface is identified by the
value of MIB-II's ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
rmIfOutPacingRateRequested This object reflects an explicit configuration of the state of pacing for this interface. If the value of this object is 0, pacing is disabled on this interface. Prior to any user configuration, the value of this obje…	kilobits-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.1
rmIfOutPacingRateInstalled The output pacing value, in kilobits per second, in effect. A value of 0 indicates output pacing is disabled. This object is not instantiated for interfaces to which it cannot be applied.	kilobits-per-secondSNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.2
rmIfOutPacingForce A Set Request for rmIfOutPacingRateRequested that does not reduce the port rate below the currently allocated bandwidth guarantees for the output flow always succeeds irrespective of the value of rmIfOutPacingForce. Bu…	ForceValuer/w Type Values: 1 forceChange 2 noForceChange	.1.3.6.1.4.1.9.10.10.1.3.3.1.3
rmIfLinkDistance The link distance defined for the interface, expressed in kilometers. This is then divided by the speed of light to determine a propagation delay.	kilometersUnsigned32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.9.10.10.1.3.3.1.4
rmIfBestEffortLimit The limit on the number of Best Effort connections that can be established on this interface. Note that a change to this value affects subsequent connection setup, not existing connections. A value of 4294967295 disable…	SNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.5
rmIfCbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing of a receive cell-stream of a CBR connection on an interface, if the limit parameter is not specified explicitly in the connection setup request. It is specified in c…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.6
rmIfVbrRtDefaultRxUpcTolerance Specifies the maximum burst size parameter used for policing of a receive cell-stream of a VBR-RT connection on an interface, if this parameter is not specified explicitly in the connection setup request. It is specifie…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.7
rmIfVbrNrtDefaultRxUpcTolerance Specifies the maximum burst size parameter used for policing of a receive cell-stream of a VBR-NRT connection on an interface, if this parameter is not specified explicitly in the connection setup request. It is specifi…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.8
rmIfAbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing of a receive cell-stream of an ABR connection on an interface, if the limit parameter is not specified explicitly in the connection setup request. It is specified in …	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.9
rmIfUbrDefaultRxUpcTolerance Specifies the GCRA limit parameter used for policing of a receive cell-stream of a UBR connection on an interface, if the limit parameter is not specified explicitly in the connection setup request. It is specified in c…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.10
rmIfVbrRtDefaultRxUpcCdvt Specifies the GCRA limit parameter used for peak-rate policing of a receive cell-stream of a VBR-RT connection on an interface, if the CDVT parameter is not specified explicitly in the connection setup request. It is sp…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.11
rmIfVbrNrtDefaultRxUpcCdvt Specifies the GCRA limit parameter used for peak-rate policing of a receive cell-stream of a VBR-NRT connection on an interface, if the CDVT parameter is not specified explicitly in the connection setup request. It is s…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.3.1.12
rmIfServCategorySupport The value of this object controls and reflects the Service Category(s) supported on this ATM interface. If a bit is set, the corresponding Service Category is supported on the interface, and CAC will allo…	Integer32r/w Constraints: range: 0-31	.1.3.6.1.4.1.9.10.10.1.3.3.1.13
rmIfFramingOverhead If this object is set to true, framing overhead will be taken into account in determining the Maximum Cell Rate that is possible on this interface. If this object is set to false, framing overhead will not figure in the…	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.9.10.10.1.3.3.1.14
rmIfFramingOverheadForce A Set Request for rmIfFramingOverhead that does not reduce the Maximum Guaranteed Services Bandwidth of this interface below the currently allocated bandwidth guarantees always succeeds irrespective of the value of rmIf…	ForceValuer/w Type Values: 1 forceChange 2 noForceChange	.1.3.6.1.4.1.9.10.10.1.3.3.1.15
rmIfOverBooking This object specifies overbooking on this interface as a percentage of the Maximum Cell Rate that is possible on this interface. If the value of this object is 100, overbooking is disabled on this interface. A set reque…	percentInteger32r/w Constraints: range: 100-1000	.1.3.6.1.4.1.9.10.10.1.3.3.1.16
rmIfVbrRtPerClassOverbooking This object specifies the Per Class Overbooking percentage for VBR-rt service category on this interface. If the value of this object is 100, Per Class Overbooking for VBR-rt is disabled on this interface. Specifyin…	percentInteger32r/w Constraints: range: 100-3200	.1.3.6.1.4.1.9.10.10.1.3.3.1.17
rmIfVbrNrtPerClassOverbooking This object specifies the Per Class Overbooking percentage for VBR-Nrt service category on this interface. If the value of this object is 100, Per Class Overbooking for VBR-Nrt is disabled on this interface. Specifying …	percentInteger32r/w Constraints: range: 100-3200	.1.3.6.1.4.1.9.10.10.1.3.3.1.18
rmIfAbrPerClassOverbooking This object specifies the Per Class Overbooking percentage for ABR service category on this interface. If the value of this object is 100, Per Class Overbooking for ABR is disabled on this interface. Specifying a value …	percentInteger32r/w Constraints: range: 100-3200	.1.3.6.1.4.1.9.10.10.1.3.3.1.19
rmIfUbrPerClassOverbooking This object specifies the Per Class Overbooking percentage for UBR service category on this interface. If the value of this object is 100, Per Class Overbooking for UBR is disabled on this interface. Specifying a value …	percentInteger32r/w Constraints: range: 100-3200	.1.3.6.1.4.1.9.10.10.1.3.3.1.20

The (conceptual) table containing Resource Management
configuration information for a single direction of
traffic flow on ATM interfaces.

rmIfDirectionCfgEntry row .1.3.6.1.4.1.9.10.10.1.3.4.1

An entry (conceptual row) in the rmIfInOutCfgTable
containing Resource Management configuration for a
traffic direction on an ATM interface. The particular
interface is identified by the value of MIB-II's ifIndex,
and …

Indexes

RFC1213-MIBifIndex rmIfDirection

Column	Syntax	OID
rmIfDirection Selects the traffic direction for which subsequent row parameters are read or written. In is received from the port(into the device), Out is transmitted to the port (from the device).	Enumeration Enumerated Values: 1 receive 2 transmit	.1.3.6.1.4.1.9.10.10.1.3.4.1.1
rmIfDirControlLinkShareMaxAgg Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum aggregate Guaranteed Service (CBR or VBR) traffic that can be allocated in a traffic direction on an interface. It is expressed as a perce…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.2
rmIfDirControlLinkShareMinCbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of CBR traffic that can be reserved in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic di…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.3
rmIfDirControlLinkShareMaxCbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum CBR traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.4
rmIfDirControlLinkShareMinVbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of VBR traffic that can be reserved in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic di…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.5
rmIfDirControlLinkShareMaxVbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum VBR traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.6
rmIfDirMaxCbrPcr Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for CBR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables checking…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.7
rmIfDirMaxCbrTolerance Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for CBR connections in a traffic direction on an interface. It is specified in cell-times. A value of 42949672…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.8
rmIfDirMaxVbrPcr Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for VBR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables checkin…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.9
rmIfDirMaxVbrScr Specifies the maximum Sustained-cell-rate (scr) traffic parameter that can be specified for VBR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables ch…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.10
rmIfDirMaxVbrTolerance Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for VBR connections in a traffic direction on an interface. It is specified in cell-times. A value of 42949672…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.11
rmIfDirMaxAbrPcr Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for ABR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables checkin…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.12
rmIfDirMaxAbrTolerance Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for ABR connections in a traffic direction on an interface. It is specified in cell-times. A value of 42949672…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.13
rmIfDirMaxUbrPcr Specifies the maximum Peak-cell-rate (pcr) traffic parameter that can be specified for UBR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables checkin…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.14
rmIfDirMaxUbrTolerance Specifies the maximum limit parameter used in the GCRA algorithm for traffic policing that can be specified for UBR connections in a traffic direction on an interface. It is specified in cell-times. A value of 42949672…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.15
rmIfDirMaxAbrMcr Specifies the maximum Minimum-cell-rate (mcr) traffic parameter that can be specified for ABR connections in a traffic direction on an interface. It is specified in cells-per-second. A value of 4294967295 disables chec…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.16
rmIfDirMaxUbrMcr Specifies the maximum Minimum-cell-rate (mcr) traffic parameter that can be specified for UBR plus (UBR with an mcr guaranteed) connections in a traffic direction on an interface. It is specified in cells-per-second. A…	cells-per-secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.17
rmIfDirMaxVbrCdvt Specifies the maximum peak-rate CDVT parameter used in the GCRA algorithm for traffic policing that can be specified for VBR connections in a traffic direction on an interface. It is specified in cell-times. A value of…	cell-timesSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.3.4.1.18
rmIfDirControlLinkShareMinAbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of ABR traffic that can be reserved in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic di…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.19
rmIfDirControlLinkShareMaxAbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum ABR traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic direction…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.20
rmIfDirControlLinkShareMinUbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies a minimum amount of UBR plus (UBR with an mcr guaranteed) traffic that can be reserved in a traffic direction on an interface. It is expressed as a p…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.21
rmIfDirControlLinkShareMaxUbr Configuration in the Controller Link Sharing (CLS) scheme. Specifies the maximum UBR plus traffic that can be allocated in a traffic direction on an interface. It is expressed as a percentage of the maximum traffic dire…	Integer32r/w Constraints: range: -1-95	.1.3.6.1.4.1.9.10.10.1.3.4.1.22

The (conceptual) table containing Resource Management
state information for ATM interfaces by Service Category.

rmIfServiceCategoryStateEntry row .1.3.6.1.4.1.9.10.10.1.4.1.1

An entry (conceptual row) in the
rmIfServiceCategoryStateTable containing Resource
Management configuration for an ATM interface. Rows
are identified by the value of MIB-II's ifIndex, and
the Service Category.

Indexes

RFC1213-MIBifIndex rmIfSc

Column	Syntax	OID
rmIfSc The Service Category to which the row applies.	Enumeration Enumerated Values: 1 cbr 2 vbrRt 3 vbrNrt 4 abr 5 ubr	.1.3.6.1.4.1.9.10.10.1.4.1.1.1
rmIfScRxAcr The Available Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This is the bandwidth available for connections. For CBR and VBR Service Categories, this value de…	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.2
rmIfScTxAcr The Available Cell Rate (specified in cells per second) for traffic sent out the interface for this Service Category. This is the bandwidth available for connections. For CBR and VBR Service Categories, this value decre…	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.3
rmIfScRxAlcr The Allocated Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This is the bandwidth allocated-to connections. For CBR and VBR Service Categories, this value inc…	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.4
rmIfScTxAlcr The Allocated Cell Rate (specified in cells per second) for traffic sent out the interface for this Service Category. This is the bandwidth allocated-to connections. For Guaranteed Service Categories, this value increas…	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.5
rmIfScNumSvxConns The number of signalled connections (VC or VP) of this Service Category currently allocated on the interface.	number of connectionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.6
rmIfScNumPvxConns The number of permanent connections (VC or VP) of this Service Category currently allocated on the interface.	number of connectionsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.7
rmIfScTxMaxCtd The maximum Cell Transfer Delay estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is estimate does not distinguish between clp0 and clp1 cells. This obje…	microsecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.8
rmIfScTxP2PeakCdv The Peak-to-Peak Cell Delay Variation estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This estimate does not distinguish between clp0 and clp1 cells. This …	microsecondsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.9
rmIfScTxClr The Cell Loss Ratio estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is an estimate for clp0 cells only. The unit of this object is negative power of t…	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.10
rmIfScTxClrClp01 The Cell Loss Ratio estimated to be experienced by cells of connections transmitted out this interface of this Service Category. This is an estimate for clp0+1 cells. The unit of this object is negative power of ten …	SNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.11
rmIfScRxDynBwSvcAcr The Available Cell Rate (specified in cells per second) for traffic received on the interface for this Service Category. This object is valid only for IMA physical interfaces. This is the bandwidth available for SVC…	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.12
rmIfScTxDynBwSvcAcr The Available Cell Rate (specified in cells per second) for traffic transmitted on the interface for this Service Category. This object is valid only for IMA physical interfaces. This is the bandwidth available for …	cells-per-secondSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.4.1.1.13

The (conceptual) table containing Resource Management
statistics information for ATM interfaces by Service Category.

rmIfServiceCategoryStatisticsEntry row .1.3.6.1.4.1.9.10.10.1.5.1.1

An entry (conceptual row) in the
rmIfServiceCategoryStatisticsTable containing Resource
Management configuration for an ATM interface. Rows
are identified by the value of MIB-II's ifIndex, and
the Service Category.

Indexes

RFC1213-MIBifIndex rmIfSc

Column	Syntax	OID
rmIfScRcacResultNumAdmit The number of successful resource allocation requests for this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.1
rmIfScRcacResultNumTotalRequests The total number of resource allocation requests for this interface.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.2
rmIfScRcacResultNumFailTraffComb The number of resource allocation requests which are considered to be in error due to an unsupported combination of traffic parameters. An example of this would be, for a VBR connection, a zero maximum burst-size given …	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.3
rmIfScRcacResultNumFailBw The number of resource allocation requests which are considered to be in error due to a lack of bandwidth. This will never occur for Best Effort Service Categories.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.4
rmIfScRcacResultNumFailLoss The number of resource allocation requests which are considered to be in error due to exceeding cell loss criterion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.5
rmIfScRcacResultNumFailDelay The number of resource allocation requests which are considered to be in error due to exceeding maximum delay criterion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.6
rmIfScRcacResultNumFailCdv The number of resource allocation requests which are considered to be in error due to exceeding cell delay variation criterion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.7
rmIfScRcacResultNumFailBeLimit The number of resource allocation requests which are considered to be in error due to exceeding a limit on the number of Best-Effort connections.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.8
rmIfScRcacResultNumFailParmLimit The number of resource allocation requests which are considered to be in error due to exceeding a traffic parameter limit criterion.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.9
rmIfScRcacResultNumFailOther The number of resource allocation requests which are considered to be in error for a reason not enumerated by other counter objects.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.5.1.1.10

The (conceptual) table containing configuration information
for ATM physical interface output queues. This table is not 
instantiated for interfaces to which it cannot be applied.

sharedMemRmIfOutputQCfgEntry row .1.3.6.1.4.1.9.10.10.1.6.1.1

An entry (conceptual row) in the sharedMemRmIfOutputQCfgTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the output queue.

Indexes

RFC1213-MIBifIndex sharedMemRmIfOutputQ

Column	Syntax	OID
sharedMemRmIfOutputQ The output queue on this ATM interface.	Enumeration Enumerated Values: 1 q1 2 q2 3 q3 4 q4	.1.3.6.1.4.1.9.10.10.1.6.1.1.1
sharedMemRmIfOutputQServCategory The service category(s) sharing this output queue on this ATM interface. The various bit positions are: 1 constant bit rate (cbr) 2 variable bit rate-real time (vbr-rt) 4 variable bit rate-no…	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.9.10.10.1.6.1.1.2
sharedMemRmIfOutputQRequestedMaxSize This object reflects an explicit configuration of the maximum number of cells that may occupy this queue. If the value of this object is 0, the maximum size in effect is a default value calculated by software. Prior t…	cellsInteger32r/w Constraints: range: 0-65504	.1.3.6.1.4.1.9.10.10.1.6.1.1.3
sharedMemRmIfOutputQInstalledMaxSize The maximum number of cells that may occupy this queue. Will be a multiple of 32. Explicit configuration of maximum size are made via the object sharedMemrmIfOutputQRequestedMaxSize. Such requests are rounded up to the …	cellsInteger32 Constraints: range: 32-65504	.1.3.6.1.4.1.9.10.10.1.6.1.1.4
sharedMemRmIfOutputQMaxSizeForce Must be set to forceChange to allow changing of sharedMemRmIfOutputQRequestedMaxSize for a queue on an interface that is 'up'. This is because such a change causes the interface to lose data while the size is changed…	ForceValuer/w Type Values: 1 forceChange 2 noForceChange	.1.3.6.1.4.1.9.10.10.1.6.1.1.5
sharedMemRmIfOutputQCellCount Count of the number of cells in the output queue.	cellsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.6.1.1.6

The (conceptual) table containing the output queue thresholds
used on ATM physical interface output queues. These are specified
per Service Category. This table is not instantiated for interfaces
to which it cannot be applied.

sharedMemRmIfThresholdCfgEntry row .1.3.6.1.4.1.9.10.10.1.6.2.1

An entry (conceptual row) in the sharedMemRmIfThresholdCfgTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the Service Catego…

Indexes

RFC1213-MIBifIndex rmIfSc

Column	Syntax	OID
sharedMemRmIfDiscardThreshold The output queue CLP/EPD threshold for this Service Category on this ATM interface. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold.	FineQueueThresholdr/w Type Values: 1 percent12 2 percent25 3 percent37 4 percent50 5 percent62 6 percent75 7 percent87 8 percent100	.1.3.6.1.4.1.9.10.10.1.6.2.1.1
sharedMemRmIfEfciThreshold The output queue EFCI marking threshold for this Service Category on this ATM interface. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold.	Enumerationr/w Enumerated Values: 1 percent12 2 percent25 3 percent50 4 percent100	.1.3.6.1.4.1.9.10.10.1.6.2.1.2
sharedMemRmIfAbrRelativeRateThreshold The ABR Relative-rate marking queue congestion threshold for the ABR queue on this ATM interface. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. This object is only defin…	FineQueueThresholdr/w Type Values: 1 percent12 2 percent25 3 percent37 4 percent50 5 percent62 6 percent75 7 percent87 8 percent100	.1.3.6.1.4.1.9.10.10.1.6.2.1.3

The (conceptual) table containing information
for Switch Threshold Groups. When cells are
queued in the switch for a direction of cell
traffic on an ATM connection (VC or VP), several
functions related to queueing are dictated
by the congestion state (fullness) of the Threshold
Group. Each connection queue is a member of
a Threshold Group.
These functions include:
- The limit on the number of cells that can
  be queued. Cells exceeding this limit are
  discarded.
- The discard threshold, used for CLP/EPD
  discard when the fullness of the queue exceeds
  the threshold.
- The marking threshold, used for EFCI
  and ABR-RR marking.
Each Threshold Group has a maximum number of cells
that can be resident in it at any one time. The
number of cells in a Group consists of the number
of cells in all the queues that are a member of
the Group. As the number of cells in a Group
approaches the maximum number for the Group,
the queue limits may be decreased. This limits
the share of  buffering available to each
connection as cell-memory is used.

lsPerVcqRmThreshGrpEntry row .1.3.6.1.4.1.9.10.10.1.7.1.1

An entry (conceptual row) in the lsPerVcqRmThreshGrpTable
containing Resource Management configuration for a
Threshold Group. All entries ever in the table are
present at startup, none are created dynamically.

Indexes

lsPerVcqRmThreshGrp

Column	Syntax	OID
lsPerVcqRmThreshGrp The Threshold Group specified by this entry.	LsPerVcqThresholdGroup Type Values: 1 tg1 2 tg2 3 tg3 4 tg4 5 tg5 6 tg6 7 tg7 8 tg8 9 tg9 10 tg10 11 tg11 12 tg12 13 tg13 14 tg14 15 tg15 16 tg16	.1.3.6.1.4.1.9.10.10.1.7.1.1.1
lsPerVcqRmThreshGrpMaxSize This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is in 64-cell units. Therefore, the value installed is [(value…	cellsInteger32r/w Constraints: range: -1-65535	.1.3.6.1.4.1.9.10.10.1.7.1.1.2
lsPerVcqRmThreshGrpQMaxSize This object reflects an explicit configuration of the maximum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. A connection queue that is a member of this Thresho…	cellsInteger32r/w Constraints: range: 31-16383	.1.3.6.1.4.1.9.10.10.1.7.1.1.3
lsPerVcqRmThreshGrpQMinSize This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. The Threshold Group at it's most congested will not…	cellsInteger32r/w Constraints: range: 1-1023	.1.3.6.1.4.1.9.10.10.1.7.1.1.4
lsPerVcqRmThreshGrpDiscThreshold The output queue CLP/EPD threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Setting this object to -1 restores the default value for the Th…	percentageInteger32r/w Constraints: range: -1-100	.1.3.6.1.4.1.9.10.10.1.7.1.1.5
lsPerVcqRmThreshGrpMarkThreshold The output queue EFCI/ABR-RR marking threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Setting this object to -1 restores the default valu…	percentageInteger32r/w Constraints: range: -1-100	.1.3.6.1.4.1.9.10.10.1.7.1.1.6
lsPerVcqRmThreshGrpName The name associated with the threshold-group. If this is set to the null-string, the default name for the Threshold Group is assigned.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.9.10.10.1.7.1.1.7
lsPerVcqRmThreshGrpCellCount Count of the number of cells in the Threshold Group.	cellsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.7.1.1.8

The (conceptual) table specifying which
VC or VP queues  are assigned to a Threshold
Group.

lsPerVcqRmThreshGrpServiceEntry row .1.3.6.1.4.1.9.10.10.1.7.2.1

An entry (conceptual row) in the
lsPerVcqRmThreshGrpServiceTable. All entries
ever in the table are present at startup, none
are created dynamically.

Indexes

lsPerVcqRmThreshGrpService

Column	Syntax	OID
lsPerVcqRmThreshGrpService The Service specified by this entry.	LsPerVcqThresholdGroupService Type Values: 1 cbr 2 vbrRt 3 vbrNrt 4 abr 5 ubr	.1.3.6.1.4.1.9.10.10.1.7.2.1.1
lsPerVcqRmThreshGrpServGroup The Threshold Group to which VC/VP queues specified by the service are assigned. Changing the assignment of service to Threshold Group does not alter the assignment for connections currently installed in hardware, but t…	LsPerVcqThresholdGroupr/w Type Values: 1 tg1 2 tg2 3 tg3 4 tg4 5 tg5 6 tg6 7 tg7 8 tg8 9 tg9 10 tg10 11 tg11 12 tg12 13 tg13 14 tg14 15 tg15 16 tg16	.1.3.6.1.4.1.9.10.10.1.7.2.1.2

The (conceptual) table containing configuration information
for ATM physical interfaces.

lsPerVcqRmIfEntry row .1.3.6.1.4.1.9.10.10.1.8.1.1

An entry (conceptual row) in the lsPerVcqRmIfTable
containing Resource Management configuration for an ATM
interface. An entry in the table is present when an
entry in the ifTable is created for an ATM interface
that …

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
lsPerVcqRmIfMinWrrServiceClass The service classes on an interface are partitioned into two subsets, dictating how a service class with a cell ready to transmit is chosen (subsequently a connection is chosen within the selected service class). There …	service classLsPerVcqServiceClassr/w Type Values: 1 c1 2 c2 3 c3 4 c4 5 c5 6 c6 7 c7 8 c8	.1.3.6.1.4.1.9.10.10.1.8.1.1.1

The (conceptual) table containing configuration information
for ATM physical interface Service Classes (not
logical port ATM interfaces). An ATM connection (VC or VP)
on an interface is a member of a Service Class. The
Service Class is used in the scheduling discipline that
determines which cell is next transmitted on the
interface. If the rate scheduler has no cell
to be sent in the guaranteed cell-flow on an interface,
a decision is made between all Service Classes with
VCs with cells ready for transmit.

lsPerVcqRmIfServiceClassEntry row .1.3.6.1.4.1.9.10.10.1.8.2.1

An entry (conceptual row) in the lsPerVcqRmIfServiceClassTable
containing Resource Management configuration for an ATM
interface. A particular row is identified by the
value of MIB-II's ifIndex, and the output queue.
A…

Indexes

RFC1213-MIBifIndex lsPerVcqRmIfServiceClass

Column	Syntax	OID
lsPerVcqRmIfServiceClass The service class on this ATM interface.	LsPerVcqServiceClass Type Values: 1 c1 2 c2 3 c3 4 c4 5 c5 6 c6 7 c7 8 c8	.1.3.6.1.4.1.9.10.10.1.8.2.1.1
lsPerVcqRmIfServClassConnType The types of connections using this service class on this ATM interface. The various bit positions are: 1 constant bit rate (cbr) 2 variable bit rate-real time (vbr-rt) 4 variable bit rate-no…	Integer32 Constraints: range: 1-31	.1.3.6.1.4.1.9.10.10.1.8.2.1.2
lsPerVcqRmIfServClassWrrWeight Configure the weighting specified for a service class to make the scheduling decision among active service classes in the WRR subset.	weightInteger32r/w Constraints: range: 1-15	.1.3.6.1.4.1.9.10.10.1.8.2.1.3

The (conceptual) table containing information
for Switch Threshold Groups. When cells are
queued in the switch for a direction of cell
traffic on an ATM connection (VC or VP), several
functions related to queueing are dictated
by the congestion state (fullness) of the Threshold
Group. Each connection queue is a member of
a Threshold Group.
These functions include:
- The limit on the number of cells that can
  be queued. Cells exceeding this limit are
  discarded.
- The discard threshold, used for CLP/EPD
  discard when the fullness of the queue exceeds
  the threshold.
- The marking threshold, used for EFCI marking.
Each Threshold Group has a maximum number of cells
that can be resident in it at any one time. The
number of cells in a Group consists of the number
of cells in all the queues that are a member of
the Group. As the number of cells in a Group
approaches the maximum number for the Group,
the queue limits may be decreased. This limits
the share of  buffering available to each
connection as cell-memory is used.
          
On the Catalyst8540MSR platform, there are a
maximum of 8 switching modules. Each switching
module services a certain group of ports (this
mapping is fixed in hardware). Each module also
has its own cell memory (for per VC queueing),
and hence performs its own congestion control,
independent of any other switching module.
Each switching module has its own set of
Switch Threshold Groups, which are 
independently programmable and readable.
          
This table is supported only on the Catalyst8540MSR
platform.

cgrPerVcqRmThreshGrpEntry row .1.3.6.1.4.1.9.10.10.1.9.1.1

An entry (conceptual row) in the cgrPerVcqRmThreshGrpTable
containing Resource Management configuration for a
Threshold Group. All entries ever in the table are
present at startup, none are created dynamically.

Indexes

cgrPerVcqModuleId cgrPerVcqRmThreshGrp

Column	Syntax	OID
cgrPerVcqModuleId The switching module specified by this entry.	CgrPerVcqModuleId Type Values: 1 module1 2 module2 3 module3 4 module4 5 module5 6 module6 7 module7 8 module8	.1.3.6.1.4.1.9.10.10.1.9.1.1.1
cgrPerVcqRmThreshGrp The Threshold Group specified by this entry.	LsPerVcqThresholdGroup Type Values: 1 tg1 2 tg2 3 tg3 4 tg4 5 tg5 6 tg6 7 tg7 8 tg8 9 tg9 10 tg10 11 tg11 12 tg12 13 tg13 14 tg14 15 tg15 16 tg16	.1.3.6.1.4.1.9.10.10.1.9.1.1.2
cgrPerVcqRmThreshGrpMaxSize This object specifies the maximum number of cells that may occupy this Threshold Group. While any integer in the range can be set, the hardware granularity is in 64-cell units. Therefore, the value installed is [(value …	cellsInteger32r/w Constraints: range: -1-131071	.1.3.6.1.4.1.9.10.10.1.9.1.1.3
cgrPerVcqRmThreshGrpQMaxSize This object reflects an explicit configuration of the maximum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. A connection queue that is a member of this Thresho…	cellsInteger32r/w Constraints: range: 31-16383	.1.3.6.1.4.1.9.10.10.1.9.1.1.4
cgrPerVcqRmThreshGrpQMinSize This object reflects an explicit configuration of the minimum limit on the number of cells that may occupy connection queues that are a member of this Threshold Group. The Threshold Group at it's most congested will not…	cellsInteger32r/w Constraints: range: 1-1023	.1.3.6.1.4.1.9.10.10.1.9.1.1.5
cgrPerVcqRmThreshGrpDiscThreshold The output queue CLP/EPD threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Setting this object to -1 restores the default value for the Th…	percentageInteger32r/w Constraints: range: -1-100	.1.3.6.1.4.1.9.10.10.1.9.1.1.6
cgrPerVcqRmThreshGrpMarkThreshold The output queue EFCI/ABR-RR marking threshold for this Threshold Group. This is expressed in percent-of-full. Note that 100% full effectively turns off the threshold. Setting this object to -1 restores the default valu…	percentageInteger32r/w Constraints: range: -1-100	.1.3.6.1.4.1.9.10.10.1.9.1.1.7
cgrPerVcqRmThreshGrpName The name associated with the threshold-group. If this is set to the null-string, the default name for the Threshold Group is assigned.	OctetStringr/w Constraints: range: 0-20	.1.3.6.1.4.1.9.10.10.1.9.1.1.8
cgrPerVcqRmThreshGrpCellCount Count of the number of cells in the Threshold Group.	cellsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.9.1.1.9

The (conceptual) table specifying which
VC or VP queues  are assigned to a Threshold
Group.
          
This table is supported only on the Catalyst8540MSR
Platform.

cgrPerVcqRmThreshGrpServiceEntry row .1.3.6.1.4.1.9.10.10.1.9.2.1

An entry (conceptual row) in the
cgrPerVcqRmThreshGrpServiceTable. All entries
ever in the table are present at startup, none
are created dynamically.

Indexes

cgrPerVcqRmThreshGrpService

Column	Syntax	OID
cgrPerVcqRmThreshGrpService The Service specified by this entry.	LsPerVcqThresholdGroupService Type Values: 1 cbr 2 vbrRt 3 vbrNrt 4 abr 5 ubr	.1.3.6.1.4.1.9.10.10.1.9.2.1.1
cgrPerVcqRmThreshGrpServGroup The Threshold Group to which VC/VP queues specified by the service are assigned. Changing the assignment of service to Threshold Group does not alter the assignment for connections currently installed in hardware, but t…	LsPerVcqThresholdGroupr/w Type Values: 1 tg1 2 tg2 3 tg3 4 tg4 5 tg5 6 tg6 7 tg7 8 tg8 9 tg9 10 tg10 11 tg11 12 tg12 13 tg13 14 tg14 15 tg15 16 tg16	.1.3.6.1.4.1.9.10.10.1.9.2.1.2

The (conceptual) table containing ATM Traffic 
Shaper configuration  and state information for 
ATM interfaces.

rmTrafficShaperIfEntry row .1.3.6.1.4.1.9.10.10.1.10.1.1

An entry (conceptual row) in the rmTrafficShaperIfTable
containing Traffic Shaper configuration and state
information for an ATM interface. The particular
interface is identified by the value of MIB-II's
ifIndex.

Indexes

RFC1213-MIBifIndex

Column	Syntax	OID
rtsIfMaxThreshold This object reflects the value of the Maximum Threshold installed in the traffic shaper hardware for this interface. This object is expressed in number of cell buffers. This object is not instantiated for interface…	cellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.1
rtsIfCellCount This object contains the count of cells queued to this interface in the traffic shaping hardware. This object is not instantiated for interfaces to which it cannot be applied.	cellsSNMPv2-SMIGauge32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.2
rtsIfVbrCfgRequested If this object is set to the value 'shapingDisable', VBR connections(VC or VP) on this interface will not be shaped. If the object is set to the value 'shapeToScrAndPcr', the VBR (VC or VP) connections on this inter…	Enumerationr/w Enumerated Values: 1 shapingDisable 2 shapeToPcr 3 shapeToScrAndPcr	.1.3.6.1.4.1.9.10.10.1.10.1.1.3
rtsIfVbrCfgInstalled This object reflects the current VBR Traffic Shaping configuration installed in the hardware. This object is not instantiated for interfaces to which it cannot be applied.	Enumeration Enumerated Values: 1 shapingDisable 2 shapeToPcr 3 shapeToScrAndPcr	.1.3.6.1.4.1.9.10.10.1.10.1.1.4
rtsIfBeCfgRequested This object reflects the traffic shaping configuration applied to Best-Effort Connections(VC or VP) belonging to UBR and ABR service categories on this interface. If this object is set to the value 'shapingDisable', …	Enumerationr/w Enumerated Values: 1 shapingDisable 2 shapeToPcr	.1.3.6.1.4.1.9.10.10.1.10.1.1.5
rtsIfBeCfgInstalled This object reflects the current Best-Effort Traffic Shaping configuration installed in the hardware. This object is not instantiated for interfaces to which it cannot be applied.	Enumeration Enumerated Values: 1 shapingDisable 2 shapeToPcr	.1.3.6.1.4.1.9.10.10.1.10.1.1.6
rtsIfVbrClassMaxThrshRequested This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the VBR Traffic Class. The value of this object is expressed as a percent of the value of rtsIfMaxThreshold object. A set request for this obj…	percentInteger32r/w Constraints: range: 1-95	.1.3.6.1.4.1.9.10.10.1.10.1.1.7
rtsIfVbrClassMaxThrshInstalled This object reflects the value of Maximum Class Threshold for VBR Traffic Class, in number of cell buffers, that is installed in the Traffic Shaping hardware. This object is not instantiated for interfaces to which i…	cellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.8
rtsIfBeClassMaxThrshRequested This object specifies the Traffic Shaper Maximum Cell Buffer Threshold for the Best-Effort Traffic Class. The value of this object is expressed as a percent of the value of rtsIfMaxThreshold object. A set request for…	percentInteger32r/w Constraints: range: 1-95	.1.3.6.1.4.1.9.10.10.1.10.1.1.9
rtsIfBeClassMaxThrshInstalled This object reflects the value of Maximum Class Threshold for Best-Effort Traffic Class, in number of cell buffers, that is installed in the Traffic Shaping hardware. This object is not instantiated for interfaces t…	cellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.10
rtsIfVbrVcMaxThrshRequested This object reflects the Maximum Threshold of the per-connection queues of VBR connections(VCs or VPs) in the traffic shaping hardware. The value of this object is expressed in number of cell buffers. Any change made…	cellsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.11
rtsIfVbrVcMaxThrshInstalled This object reflects the Maximum Threshold for the per-connection queues of VBR connections(VCs or VPs) that is installed in the Traffic Shaping hardware. The value of this object is expressed in number of cell buffer…	cellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.12
rtsIfBeVcMaxThrshRequested This object reflects the Maximum Threshold of the per-connection queues of best-effort connections(VCs or VPs) in the traffic shaping hardware. The value of this object is expressed in number of cell buffers. Any cha…	cellsUnsigned32r/w Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.13
rtsIfBeVcMaxThrshInstalled This object reflects the Maximum Threshold for the per-connection queues of Best-Effort connections(VCs or VPs) that is installed in the Traffic Shaping hardware. The value of this object is expressed in number of c…	cellsUnsigned32 Constraints: range: 0-4294967295	.1.3.6.1.4.1.9.10.10.1.10.1.1.14