CISCO-ATM-DUAL-PHY-MIB Table View
Table-centric layout grouping table, row, and column objects.
Tables
1
Rows
1
Columns
10
cadpStatTable
table
.1.3.6.1.4.1.9.9.60.1.1.1
·
1 row entry
·
10 columns
Uses the cisco variant from
Command help
/opt/observium/mibs/cisco.
Walk cadpStatTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ATM-DUAL-PHY-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ATM-DUAL-PHY-MIB::cadpStatTable'
A table of status information about ATM phy.
An Atm Phy table entry, containing information about
a phy on this ATM module.
a phy on this ATM module.
| Column | Syntax | OID | ||||
|---|---|---|---|---|---|---|
|
Set to true if the phy is currently experiencing a
loss of signal (LOS) from its connected port. Set to false if the phy is not experiencing a loss of signal. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.60.1.1.1.1.1 |
||||
|
Set to true if the phy is currently experiencing a far
end receive failure (FERF) with its connected port. Set to false if the phy is not experiencing a far end receive failure. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.60.1.1.1.1.2 |
||||
|
Set to true when this phy is currently the active phy.
Set to false when this phy is not the currently active phy. |
SNMPv2-TCTruthValue Type Values:
Description: Represents a boolean value. |
.1.3.6.1.4.1.9.9.60.1.1.1.1.5 |
||||
|
The Bit Interleaved Parity 8 is an error checking code
applied for quick isolation of faults. Each bit in the B octets is set to 1 or 0 as necessary to obtain even parity over the previous frame. The calculated BIP-8 … |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.6 |
||||
|
The Bit Interleaved Parity 8/24 is an error checking code
based on even parity. The calculated BIP code for frame N is compared with the BIP-8/24 code extracted from the B2 byte(s) of frame N+1. Any differences indica… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.7 |
||||
|
The number of bits (binary 000 to 1000) in the previous
BIP-8 that didn't match the even parity check are inserted by the transmitter. The receiver checks for this in the M0/M1 byte of the frame. A non-zero value (le… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.8 |
||||
|
The Bit Interleaved Parity 8 is an error checking code
applied for quick isolation of faults. Each bit in the B octets is set to 1 or 0 as necessary to obtain even parity over the previous frame. The cal… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.9 |
||||
|
The number of B3 errors in the previous frame inserted
by the transmitter. The receiver checks for this in the G1 byte of the frame. A non-zero value (legal range is binary 0000 - 1000) indicates a line layer error in… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.10 |
||||
|
The Header Checksum (HCS) is a CRC-8 calculation over
the first 4 octets of the ATM cell header. The received HCS is verified using the polynomial x^8 + x^2 + x + 1. The coset polynomial x^6 + x^4 + x^2 + 1, is added (… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.11 |
||||
|
The Header Checksum (HCS) is a CRC-8 calculation over
the first 4 octets of the ATM cell header. The received HCS is verified using the polynomial x^8 + x^2 + x + 1. The coset polynomial x^6 + x^4 + x^2 + 1, is added (m… |
SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295 |
.1.3.6.1.4.1.9.9.60.1.1.1.1.12 |
