CISCO-ADSL-CAP-LINE-MIB

        This MIB module serves as an enterprise-specific extension of
the ADSL-LINE-MIB.  The structure of this MIB module shadows
the structure of the ADSL-LINE-MIB, table for table.  The tables
defined by this MIB module contain managed objects that meet the
following criteria:
        
1)  A managed object represents an attribute or characteristic
    specific to CAP (Carrierless AM/PM) modems.
        
2)  The ADSL-CAP-LINE-MIB does not already contain a managed
    object representing the same information as this managed
    object.
        
Observe that entries contained by the tables in this MIB module
do not augment the corresponding entries in the ADSL-LINE-MIB,
as every modem represented by the ADSL-LINE-MIB is not
necessarily a CAP modem.
        
Also observe that entries contained by the tables in this MIB
module do not augment the corresponding entries in the
ADSL-CAP-LINE-MIB, as this assumes that the ADSL-CAP-LINE-MIB
defines tables that correspond to every table defined by the
ADSL-LINE-MIB.  At this time, this assumption does not hold
true.
        
*** ABBREVIATIONS, ACRONYMS, AND SYMBOLS ***
        
ADSL - Asymmetric Digital Subscriber Line.
        
ATM - Asynchronous Transfer Mode.
        
ATU-C - ADSL Transceiver Unit, Central Office end.
        
ATU-R - ADSL Transceiver Unit, Remote terminal end.
        
BER - Bit Error Ratio.
        
CAP - Carrierless Amplitude Modulation / Pulse Modulation.
        
DSL - Digital Subscriber Line.
        
SNR - Signal-to-Noise Ratio.
        
STM - Synchronous Transfer Mode.
        
*** DEFINITIONS ***
        
DOWNSTREAM
    The flow of data in the direction from the ATU-C to ATU-R.
        
MARGIN (also referred to as 'SNR margin')
    The difference between the SNR of the received signal and
    the SNR required to provide a BER of 10E-7.
        
SYMBOL
    The number of bits the transmitter is capable of
    multiplexing and modulating in a single signalling interval.
        
SYMBOL RATE
    The rate at which all symbols are transmitted.
        
UPSTREAM
    The flow of data in the direction from the ATU-R to ATU-C.
    
Source file
CISCO-ADSL-CAP-LINE-MIB
Last revised
Identity
ciscoAdslLineCapMIB
Base OID
1.3.6.1.4.1.9.9.149
Imported Objects
ADSL-LINE-MIB adslAtucIntervalNumber adslLineConfProfileName
ADSL-TC-MIB AdslPerfCurrDayCount AdslPerfPrevDayCount
CISCO-SMI ciscoMgmt
IF-MIB ifIndex
PerfHist-TC-MIB PerfCurrentCount PerfIntervalCount
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Counter32 Gauge32 Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page)
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the cisco MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CISCO-ADSL-CAP-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CISCO-ADSL-CAP-LINE-MIB::ciscoAdslLineCapMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CISCO-ADSL-CAP-LINE-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CISCO-ADSL-CAP-LINE-MIB::ciscoAdslLineCapMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (40)
.1.3.6.1.4.1.9.9.149
.1.3.6.1.4.1.9.9.149.1
.1.3.6.1.4.1.9.9.149.1.14
.1.3.6.1.4.1.9.9.149.1.14.1
Enumeration
.1.3.6.1.4.1.9.9.149.1.14.1.1
dBm/HzInteger32
.1.3.6.1.4.1.9.9.149.1.14.1.10
tenth dBInteger32
.1.3.6.1.4.1.9.9.149.1.14.1.11
.1.3.6.1.4.1.9.9.149.1.14.1.12
.1.3.6.1.4.1.9.9.149.1.14.1.13
dBm/HzInteger32
.1.3.6.1.4.1.9.9.149.1.14.1.14
Enumeration
.1.3.6.1.4.1.9.9.149.1.14.1.2
Integer32
.1.3.6.1.4.1.9.9.149.1.14.1.3
tenth dBInteger32
.1.3.6.1.4.1.9.9.149.1.14.1.4
.1.3.6.1.4.1.9.9.149.1.14.1.5
.1.3.6.1.4.1.9.9.149.1.14.1.6
.1.3.6.1.4.1.9.9.149.1.14.1.7
.1.3.6.1.4.1.9.9.149.1.14.1.8
.1.3.6.1.4.1.9.9.149.1.14.1.9
.1.3.6.1.4.1.9.9.149.1.2
.1.3.6.1.4.1.9.9.149.1.2.1
Enumeration
.1.3.6.1.4.1.9.9.149.1.2.1.1
.1.3.6.1.4.1.9.9.149.1.2.1.2
.1.3.6.1.4.1.9.9.149.1.2.1.3
.1.3.6.1.4.1.9.9.149.1.3
.1.3.6.1.4.1.9.9.149.1.3.1
.1.3.6.1.4.1.9.9.149.1.3.1.1
.1.3.6.1.4.1.9.9.149.1.6
.1.3.6.1.4.1.9.9.149.1.6.1
.1.3.6.1.4.1.9.9.149.1.6.1.1
.1.3.6.1.4.1.9.9.149.1.6.1.2
.1.3.6.1.4.1.9.9.149.1.6.1.3
.1.3.6.1.4.1.9.9.149.1.6.1.4
.1.3.6.1.4.1.9.9.149.1.8
.1.3.6.1.4.1.9.9.149.1.8.1
.1.3.6.1.4.1.9.9.149.1.8.1.1
.1.3.6.1.4.1.9.9.149.2
.1.3.6.1.4.1.9.9.149.2.0
.1.3.6.1.4.1.9.9.149.3
.1.3.6.1.4.1.9.9.149.3.1
.1.3.6.1.4.1.9.9.149.3.2
Dependencies (11) 8 direct · 3 transitive Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Type Definitions (2)
Integer32 range: 0range: 256000range: 384000range: 512000range: 640000range: 768000range: 896000range: 960000range: 1024000range: 1280000range: 1600000range: 1920000range: 2240000range: 2560000range: 2688000range: 3200000range: 4480000range: 5120000range: 6272000range: 7168000
Integer32 range: 0range: 91000range: 272000range: 408000range: 544000range: 680000range: 816000range: 952000range: 1088000
Conformance Groups (5)
A collection of managed objects defining the basic operation
of an ATU-C implementing the CAP line code.
.1.3.6.1.4.1.9.9.149.3.2.1
A collection of managed objects defining the basic operation
of an ATU-R implementing the CAP line code.
.1.3.6.1.4.1.9.9.149.3.2.2
A collection of managed objects defining the capability to
remotely manage a ATU-R.
.1.3.6.1.4.1.9.9.149.3.2.3
A collection of managed objects defining near-end performance
data collection capability using 15-minute intervals.
.1.3.6.1.4.1.9.9.149.3.2.4
A collection of managed objects defining near-end performance
data collection capability using 1-day intervals.
.1.3.6.1.4.1.9.9.149.3.2.5
Compliance Statements (2)

OID .1.3.6.1.4.1.9.9.149.3.1.1
The compliance statement for entities that implement the
CISCO-ADSL-CAP-LINE-MIB. Implementation of this MIB is
mandatory for any platform that supports one or more ADSL
line interfaces that implement the CAP line code.
Required groups
mandatory cAdslAtucCapBasicGroup
optional cAdslAturCapGroup The implementation of this group is optional. However,
this statement recommends the implementation of this group
if the ATU-C and ATU-R support a remote management
capability.
optional cAdslAtucCapPM15MinIntervalGroup The implementation of this group is optional.
optional cAdslAtucCapPM1DayIntervalGroup The implementation of this group is optional.

OID .1.3.6.1.4.1.9.9.149.3.1.2
The compliance statement for entities that implement the
CISCO-ADSL-CAP-LINE-MIB and manage ADSL ATU-R class devices.
Implementation of this MIB is mandatory for any platform
that supports one or more ADSL line interfaces that implement
the CAP line code.
Required groups