CIENA-WS-ALARM-MIB

Monitored by Observium
        This module defines alarm data for the Waveserver.
    
Observium actively monitors this MIB
Observium uses this MIB in discovery or polling workflows on applicable devices.
Status
Explore Observium network monitoring
Source file
CIENA-WS-ALARM-MIB
Last revised
Identity
cienaWsAlarmMIB
Base OID
1.3.6.1.4.1.1271.3.4.4
Imported Objects
CIENA-WS-MIB cienaWsConfig
CIENA-WS-TYPEDEFS-MIB StringMaxl16 StringMaxl32 StringMaxl44
SNMPv2-CONF MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page)
SNMPv2-SMI Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) Unsigned32
SNMPv2-TC TEXTUAL-CONVENTION (no object page) TruthValue
Net-SNMP examples using the ciena MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CIENA-WS-ALARM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CIENA-WS-ALARM-MIB::cienaWsAlarmMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-WS-ALARM-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-WS-ALARM-MIB::cienaWsAlarmMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (48)
2 directly used by Observium
.1.3.6.1.4.1.1271.3.4.4
.1.3.6.1.4.1.1271.3.4.4.1
.1.3.6.1.4.1.1271.3.4.4.2
.1.3.6.1.4.1.1271.3.4.4.2.1
.1.3.6.1.4.1.1271.3.4.4.2.2
.1.3.6.1.4.1.1271.3.4.4.3
.1.3.6.1.4.1.1271.3.4.4.3.1
Integer32
.1.3.6.1.4.1.1271.3.4.4.3.1.1
.1.3.6.1.4.1.1271.3.4.4.3.1.10
.1.3.6.1.4.1.1271.3.4.4.3.1.2
.1.3.6.1.4.1.1271.3.4.4.3.1.3
.1.3.6.1.4.1.1271.3.4.4.3.1.4
.1.3.6.1.4.1.1271.3.4.4.3.1.5
.1.3.6.1.4.1.1271.3.4.4.3.1.6
.1.3.6.1.4.1.1271.3.4.4.3.1.7
.1.3.6.1.4.1.1271.3.4.4.3.1.8
.1.3.6.1.4.1.1271.3.4.4.3.1.9
.1.3.6.1.4.1.1271.3.4.4.4
.1.3.6.1.4.1.1271.3.4.4.4.1
Integer32
.1.3.6.1.4.1.1271.3.4.4.4.1.1
.1.3.6.1.4.1.1271.3.4.4.4.1.10
.1.3.6.1.4.1.1271.3.4.4.4.1.11
.1.3.6.1.4.1.1271.3.4.4.4.1.2
.1.3.6.1.4.1.1271.3.4.4.4.1.3
.1.3.6.1.4.1.1271.3.4.4.4.1.4
.1.3.6.1.4.1.1271.3.4.4.4.1.5
.1.3.6.1.4.1.1271.3.4.4.4.1.6
.1.3.6.1.4.1.1271.3.4.4.4.1.7
.1.3.6.1.4.1.1271.3.4.4.4.1.8
.1.3.6.1.4.1.1271.3.4.4.4.1.9
.1.3.6.1.4.1.1271.3.4.4.5
.1.3.6.1.4.1.1271.3.4.4.5.1
Integer32
.1.3.6.1.4.1.1271.3.4.4.5.1.1
.1.3.6.1.4.1.1271.3.4.4.5.1.2
.1.3.6.1.4.1.1271.3.4.4.5.1.3
.1.3.6.1.4.1.1271.3.4.4.5.1.4
.1.3.6.1.4.1.1271.3.4.4.5.1.5
.1.3.6.1.4.1.1271.3.4.4.5.1.6
.1.3.6.1.4.1.1271.3.4.4.5.1.7
.1.3.6.1.4.1.1271.3.4.4.5.1.8
.1.3.6.1.4.1.1271.3.4.4.6
.1.3.6.1.4.1.1271.3.4.4.6.1
Integer32
.1.3.6.1.4.1.1271.3.4.4.6.1.1
.1.3.6.1.4.1.1271.3.4.4.6.1.2
.1.3.6.1.4.1.1271.3.4.4.6.1.3
.1.3.6.1.4.1.1271.3.4.4.6.1.4
.1.3.6.1.4.1.1271.3.4.4.6.1.5
.1.3.6.1.4.1.1271.3.4.4.6.1.6
Dependencies (5) 5 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CIENA-WS-MIBciena
  3. SNMPv2-CONFrfc
  4. SNMPv2-TCrfc
  5. CIENA-WS-TYPEDEFS-MIBciena
  6. CIENA-WS-ALARM-MIBcienaselected
Type Definitions (2)
Enumeration
reset(1)
set(2)
acknowledge(5)
clear(6)
delete(7)
config(9)
Enumeration
cleared(1)
critical(3)
major(4)
minor(5)
warning(6)
info(8)
Compliance Statements (1)

OID .1.3.6.1.4.1.1271.3.4.4.2.2.1
Compliance
Required groups