CIENA-CES-PORT-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view

Tables

Rows

Columns

cienaCesLogicalPortConfigTable

table

.1.3.6.1.4.1.1271.2.1.1.1.1.1 · 1 row entry · 38 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk cienaCesLogicalPortConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-MIB::cienaCesLogicalPortConfigTable'

Table of Ethernet ports.

cienaCesLogicalPortConfigEntry row .1.3.6.1.4.1.1271.2.1.1.1.1.1.1

Port entry in the Ethernet port table.

Indexes

cienaCesLogicalPortConfigPgId

Column Syntax OID

cienaCesLogicalPortConfigPgId

Port ID for the instance. Port IDs start at 1,
and may not be consecutive for each additional port.
This port ID should refer to the dot1dBasePort in the
dot1dBasePortEntry.

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.1

cienaCesLogicalPortConfigPortAdminState

The administrative state of the port.

CIENA-TCCienaGlobalState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.2

cienaCesLogicalPortConfigPortOperState

The current operational state of the port.

Enumeration

Enumerated Values:

1	invalid
2	enabled
3	disabled
4	notAuthenticated
5	loopbackTx
6	loopbackRx
7	unequipped

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.3

cienaCesLogicalPortConfigPortLinkUpDownTrapState

This object specifies the current value of the enterprise port traps state.

CIENA-TCCienaGlobalStater/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.4

cienaCesLogicalPortConfigPortAllTrapState

This object indicates whether the device generates traps for this port.

CIENA-TCCienaGlobalStater/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.5

cienaCesLogicalPortConfigPortPortMacAddress

This object specifies the port MAC address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.6

cienaCesLogicalPortConfigPortName

A textual string containing information about the
port. This string should indicate the physical
location of the port as well.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.7

cienaCesLogicalPortConfigPortDesc

This object specifies the port description.

OctetString

Constraints:
range: 0-128

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.8

cienaCesLogicalPortConfigPortType

The port type for the port.

Enumeration

Enumerated Values:

1	unknown
2	ethernet
3	fastEthernet
4	hundredFx
5	gigEthernet
6	lagPort
7	gigHundredFx
8	tripleSpeed
9	tenGigEthernet
10	vmTripleSpeedTX
11	sonetOc3
12	sonetOc12
13	sonetOc48
14	sonetOc192
15	fortyGigEthernet
16	hundredGigEthernet
17	odu
18	ethLp
19	twoPointFiveGigEthernet
20	odu4

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.9

cienaCesLogicalPortConfigPortIfIndex

This object indicates the corresponding ifNumber for the PGID in the standard IF-MIB.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.10

cienaCesPortAdminSpeed

The desired speed of the port.

Enumeration

Enumerated Values:

1	notApplicable
2	tenMbps
3	hundredMbps
4	gig
5	tenGig
6	auto
7	fortyGig
8	hundredGig
9	oduFlex
10	twoPtFiveGig

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.11

cienaCesPortOperSpeed

The current operational speed of the port.

Enumeration

Enumerated Values:

1	notApplicable
2	tenMbps
3	hundredMbps
4	gig
5	tenGig
6	fortyGig
7	hundredGig
8	oduFlex
9	twoPtFiveGig

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.12

cienaCesPortMaxFrameSize

The maximum frame size allowed on this port including jumbo frame size.

Integer32

Constraints:
range: 1522-9216

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.13

cienaCesLogicalPortConfigEttpAid

The TL1 AID of the ETTP object represented by this port.
This field is undefined if the logical port maps to a LAG.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.14

cienaCesLogicalPortLastDownReason1

The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.15

cienaCesLogicalPortLastDownReason2

The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.16

cienaCesLogicalPortLastDownReason3

The most recent fault(s) that changed the port state to down.
This field is undefined if the logical port maps to a LAG.

OctetString

Constraints:
range: 0-255

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.17

cienaCesLogicalPortMaskedDownReason

The masked/debounced fault that explains why the port is down.
This field is undefined if the logical port maps to a LAG.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.18

cienaCesLogicalPortFacilityLoopback

The facility loopback state of the port.
This field is undefined if the logical port maps to a LAG.

CIENA-TCCienaGlobalState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.19

cienaCesPortIngressRcosProfileId

This object specifies the ID of the attached ingress resolved CoS profile.

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.20

cienaCesPortIngressRcosProfileName

This object specifies the name of the attached ingress resolved CoS profile.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.21

cienaCesPortIngressRcosPolicy

This object specifies the ingress resolved CoS policy.

Enumeration

Enumerated Values:

1	ignore
2	fixed
3	dot1dToRcosTag1
4	dot1dToRcosTag2
5	dscpToRcos
6	mplsToRcos
7	dscpMplsToRcos

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.22

cienaCesLogicalPortConfigEttpId

ETTP mapped to by PG-ID of the instance. ETTP IDs start at 1,
and may not be consecutive for each additional port.
An ETTP-ID of 0 denotes that the logical port is not mapped directly to an ETTP
e.g. Aggregate port o…

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.23

cienaCesLogicalPortConfigEttpType

The port type for the associated ettp.

Enumeration

Enumerated Values:

1	unknown
2	ethernet
3	fastEthernet
4	hundredFx
5	gigEthernet
7	gigHundredFx
8	tripleSpeed
9	tenGigEthernet
10	vmTripleSpeedTX
11	sonetOc3
12	sonetOc12
13	sonetOc48
14	sonetOc192
15	fortyGigEthernet
16	hundredGigEthernet
17	twoPointFiveGigEthernet
18	odu4

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.24

cienaCesLogicalPortConfigIngMirrorPort

This object indicates whether ingress traffic is being
mirrored. If ingress traffic is being mirrored this object
specifies which port the traffic is being mirrored to.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.25

cienaCesLogicalPortConfigEgrMirrorPort

This object indicates whether egress traffic is being
mirrored. If egress traffic is being mirrored this object
specifies which port the traffic is being mirrored to.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.26

cienaCesLogicalPortConfigIngFloodContainer

This object indicates whether ingress flood traffic is
rate limited. If ingress flood traffic is rate limited
this object specifies the flood containment profile for
the port.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.27

cienaCesLogicalPortConfigPriorityTagMode

This object specifies whether the priority tag of a frame
is stripped (strip-tag) or left intact (leave-tag) upon
ingress and egress.

PortPriorityTagPolicy

Type Values:

1	leave-tag
2	strip-tag

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.28

cienaCesLogicalPortConfigVidTpidCount

This object specifies the number of ingress TPID-pairs (inner + outer)
configured on the port

SNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.29

cienaCesPortOperationalSpeed

This object specifies the port's current bandwidth in
kilobits per second

kbpsSNMPv2-SMIGauge32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.30

cienaCesPortOuterTpidList

This object specifies the valid outer vlan tag list which can be used as egress vlan tag or outer vlan tag.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.31

cienaCesPortEgressOuterTpid

This object specifies the egress vlan tag.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.32

cienaCesPortOuterVtagTpid

This object specifies the outer vlan tag.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.33

cienaCesPortAdministrativeSpeed

This object specifies the port's administrative bandwidth in
kilobits per second

kbpsSNMPv2-SMIUnsigned32

Type Constraints:
range: 0..4294967295

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.34

cienaCesPortTerminalLoopbackState

The terminal loopback state of the port.
This field is undefined if the logical port maps to a LAG.

CIENA-TCCienaGlobalState

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.35

cienaCesPortLearnLimit

This object specifies learn limit count for port

SNMPv2-SMIInteger32

Type Constraints:
range: -2147483648..2147483647

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.36

cienaCesLogicalPortConfigSignalDegradeDetection

This object specifies if signal degrade detection is enabled
or disabled on the port. And if enabled, this object specifies
the technology of which signal degrade detection uses.

Enumeration

Enumerated Values:

1	off
2	otn
3	y1731SyntheticLoss

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.37

cienaCesLogicalPortConfigSignalDegradeState

The signal degrade state of the port.

Enumeration

Enumerated Values:

1	none
2	degraded

.1.3.6.1.4.1.1271.2.1.1.1.1.1.1.38

cienaCesPortPgIdMappingTable

table

.1.3.6.1.4.1.1271.2.1.1.1.2.1 · 1 row entry · 9 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk cienaCesPortPgIdMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-MIB::cienaCesPortPgIdMappingTable'

Table to map the hierarchical (dotted) port index to PGID value.

cienaCesPortPgIdMappingEntry row .1.3.6.1.4.1.1271.2.1.1.1.2.1.1

Entry in the PGID mapping table.

Indexes

cienaCesPortPgIdMappingChassisIndex cienaCesPortPgIdMappingShelfIndex cienaCesPortPgIdMappingSlotIndex cienaCesPortPgidMappingPortNumber

Column	Syntax	OID
cienaCesPortPgIdMappingChassisIndex The object indicates the chassis index for the port.	Unsigned32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.1`
cienaCesPortPgIdMappingShelfIndex The object indicates the shelf index for the port.	Unsigned32 Constraints: `range: 0-992`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.2`
cienaCesPortPgIdMappingSlotIndex The object indicates the slot index for the port.	Unsigned32 Constraints: `range: 1-38`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.3`
cienaCesPortPgidMappingPortNumber The object indicates the port number for the corresponding PGID.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.4`
cienaCesPortPgIdMappingPgId This object indicates the PGID value for the corresponding dotted index value.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.5`
cienaCesPortPgIdMappingNotifChassisIndex The object indicates the chassis index for the port used for trap definition.	Unsigned32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.6`
cienaCesPortPgIdMappingNotifShelfIndex The object indicates the shelf index for the port used for trap definition.	Unsigned32 Constraints: `range: 0-992`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.7`
cienaCesPortPgIdMappingNotifSlotIndex The object indicates the slot index for the port used for trap definition.	Unsigned32 Constraints: `range: 1-38`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.8`
cienaCesPortPgIdMappingNotifPortNumber The object indicates the port number for the corresponding PGID used for trap definition.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.2.1.1.9`

cienaCesEttpConfigTable

table

.1.3.6.1.4.1.1271.2.1.1.1.3.1 · 1 row entry · 16 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk cienaCesEttpConfigTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-MIB::cienaCesEttpConfigTable'

Table of Ethernet (default) physical ports. (ETTPs).

cienaCesEttpConfigEntry row .1.3.6.1.4.1.1271.2.1.1.1.3.1.1

ETTP entry in the Ethernet default physical port table.

Indexes

cienaCesEttpConfigEttpId

Column Syntax OID

cienaCesEttpConfigEttpId

ETTP ID for the instance. ETTP IDs start at 1,
and may not be consecutive for each additional ettp.
Note that ETTP-IDs map directly 1:1 to default physical port PGIDs

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.1

cienaCesEttpConfigOperState

The current operational state of the ettp.

Enumeration

Enumerated Values:

1	invalid
2	enabled
3	disabled
4	notAuthenticated
5	loopbackTx
6	loopbackRx
7	unequipped

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.2

cienaCesEttpConfigLinkUpDownTrapState

This object specifies the current value of the enterprise ettp traps state.

CIENA-TCCienaGlobalStater/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.3

cienaCesEttpConfigAllTrapState

This object indicates whether the device generates traps for this ettp.

CIENA-TCCienaGlobalStater/w

Type Values:

1	enabled
2	disabled

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.4

cienaCesEttpConfigMacAddress

This object specifies the ettp MAC address.

SNMPv2-TCMacAddress

Type Constraints:
range: 6

Description:

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.5

cienaCesEttpConfigName

A textual string containing information about the
ettp. This string should indicate the physical
location of the ettp as well.

OctetString

Constraints:
range: 0-32

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.6

cienaCesEttpConfigEttpType

The port type for the ettp.

Enumeration

Enumerated Values:

1	unknown
2	ethernet
3	fastEthernet
4	hundredFx
5	gigEthernet
7	gigHundredFx
8	tripleSpeed
9	tenGigEthernet
10	vmTripleSpeedTX
11	sonetOc3
12	sonetOc12
13	sonetOc48
14	sonetOc192
15	fortyGigEthernet
16	hundredGigEthernet
17	twoPointFiveGigEthernet
18	odu4

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.7

cienaCesEttpConfigAdminSpeed

The desired speed of the ettp.

Enumeration

Enumerated Values:

1	notApplicable
2	tenMbps
3	hundredMbps
4	gig
5	tenGig
6	auto
7	fortyGig
8	hundredGig
10	twoPtFiveGig

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.8

cienaCesEttpConfigOperSpeed

The current operational speed of the ettp.

Enumeration

Enumerated Values:

1	notApplicable
2	tenMbps
3	hundredMbps
4	gig
5	tenGig
6	fortyGig
7	hundredGig
9	twoPtFiveGig

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.9

cienaCesEttpConfigEthLpPgid

PG ID-mapped to the instance.
ETTPs will map to a logical port which can be one of default-physical-port, aggregate-port, port-alias-port

Unsigned32

Constraints:
range: 1-65535

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.10

cienaCesEttpConfigDuplex

This object indicates whether the port can transmit and receive data simultaneously.

EttpDuplexPolicy

Type Values:

1	half
2	full

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.11

cienaCesEttpConfigFlowCntl

This object indicates the port action when frames are received faster than the port can process them.

EttpFlowControlPolicy

Type Values:

1	off
2	asym-tx
3	sym
5	asym-rx

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.12

cienaCesEttpConfigAutoNeg

This object indicates whether the port should negotiate with its link partner to determine common operating parameters.

EttpAutoNegPolicy

Type Values:

1	off
2	on

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.13

cienaCesEttpConfigAdvertisedFlowCntl

This object indicates whether flow control settings are advertised.

EttpAdvertisedFlowControlPolicy

Type Values:

1	off
2	asym-tx
3	sym
4	sym-asym-rx

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.14

cienaCesEttpConfigIfgDecr

This object specifies the number of bytes by which to decrease the Inter-frame Gap (IFG) for frames being received on the port.

Unsigned32

Constraints:
range: 0-5

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.15

cienaCesEttpConfigXcvrFreq

This object specifies the desired frequency of the transceiver in GHz.

Unsigned32

Constraints:
range: 191100-196150

.1.3.6.1.4.1.1271.2.1.1.1.3.1.1.16

cienaCesLogicalPortTpidTable

table

.1.3.6.1.4.1.1271.2.1.1.1.4.1 · 1 row entry · 3 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk cienaCesLogicalPortTpidTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-MIB::cienaCesLogicalPortTpidTable'

Table of ingress TPIDs for every port

cienaCesLogicalPortTpidEntry row .1.3.6.1.4.1.1271.2.1.1.1.4.1.1

Each entry represents an individual ingress TPID pairs belonging to a port.
The number of ingress TPID entries per port is decided by the
cienaCesLogicalPortConfigVidTpidCount object. E.g. 8100 and 88A8

Indexes

cienaCesLogicalPortConfigPgId cienaCesLogicalPortTpidIndex

Column	Syntax	OID
cienaCesLogicalPortTpidIndex The object indicates the ingress tpid pair index for the port. size => CS_MAX_L2_ETYPES	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1271.2.1.1.1.4.1.1.1`
cienaCesLogicalPortInnerVidTpid The object indicates the inner vlan tag TPID for the ingress tpid pair index of the port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1271.2.1.1.1.4.1.1.2`
cienaCesLogicalPortOuterVidTpid The object indicates the outer vlan tag TPID for the ingress tpid pair index of the port.	SNMPv2-SMIUnsigned32 Type Constraints: `range: 0..4294967295`	`.1.3.6.1.4.1.1271.2.1.1.1.4.1.1.3`

cienaCesChPortPgIdMappingTable

table

.1.3.6.1.4.1.1271.2.1.1.1.5.1 · 1 row entry · 11 columns

Open in standard view

Uses the ciena variant from /opt/observium/mibs/ciena.

Command help

Walk cienaCesChPortPgIdMappingTable

/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-PORT-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-PORT-MIB::cienaCesChPortPgIdMappingTable'

Table to map the hierarchical (dotted) port index to PgId value.
This table supports channelized interfaces.

cienaCesChPortPgIdMappingEntry row .1.3.6.1.4.1.1271.2.1.1.1.5.1.1

Entry in the PgId mapping table.

Indexes

cienaCesChPortPgIdMappingChassisIndex cienaCesChPortPgIdMappingShelfIndex cienaCesChPortPgIdMappingSlotIndex cienaCesChPortPgIdMappingPortNumber cienaCesChPortPgIdMappingChannelNumber

Column	Syntax	OID
cienaCesChPortPgIdMappingChassisIndex The object indicates the chassis index for the port.	Unsigned32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.1`
cienaCesChPortPgIdMappingShelfIndex The object indicates the shelf index for the port.	Unsigned32 Constraints: `range: 0-992`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.2`
cienaCesChPortPgIdMappingSlotIndex The object indicates the slot index for the port.	Unsigned32 Constraints: `range: 1-38`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.3`
cienaCesChPortPgIdMappingPortNumber The object indicates the port number for the corresponding PgId.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.4`
cienaCesChPortPgIdMappingChannelNumber The object indicates the channel number for the corresponding PgId. The value 0 is used if the port is not channelized.	Unsigned32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.5`
cienaCesChPortPgIdMappingPgId This object indicates the PgId value for the port as specified by this object's index.	Unsigned32 Constraints: `range: 1-4294967295`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.6`
cienaCesChPortPgIdMappingNotifChassisIndex The object indicates the chassis index for the port used for trap definition.	Unsigned32 Constraints: `range: 1-1`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.7`
cienaCesChPortPgIdMappingNotifShelfIndex The object indicates the shelf index for the port used for trap definition.	Unsigned32 Constraints: `range: 0-992`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.8`
cienaCesChPortPgIdMappingNotifSlotIndex The object indicates the slot index for the port used for trap definition.	Unsigned32 Constraints: `range: 1-38`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.9`
cienaCesChPortPgIdMappingNotifPortNumber The object indicates the port number for the corresponding PgId used for trap definition.	Unsigned32 Constraints: `range: 1-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.10`
cienaCesChPortPgIdMappingNotifChannelNumber The object indicates the channel number for the corresponding PgId used for trap definition. The value 0 is used if the port is not channelized.	Unsigned32 Constraints: `range: 0-65535`	`.1.3.6.1.4.1.1271.2.1.1.1.5.1.1.11`