CIENA-CES-MPLS-MIB Table View

The (conceptual) table listing the MPLS static encap tunnels.

cienaCesMplsStaticIngressTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.2.1

This represents an entry of the MPLS static encap tunnel table.

Indexes

cienaCesMplsStaticIngressTunnelIndex

Column	Syntax	OID
cienaCesMplsStaticIngressTunnelIndex Unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.1
cienaCesMplsStaticIngressTunnelName This represents the encap tunnel name. Tunnel names are common across static and dynamic.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.2
cienaCesMplsStaticIngressTunnelWeight A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.3
cienaCesMplsStaticIngressTunnelNextHopIp Specifies the next hop IP address for the static encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.4
cienaCesMplsStaticIngressTunnelAdminState Specifies the administrative status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.5
cienaCesMplsStaticIngressTunnelOperState Specifies the operational status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.6
cienaCesMplsStaticIngressTunnelDestIpAddr Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.7
cienaCesMplsStaticIngressTunnelLabel The label for the static encap tunnel.	Integer32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.8
cienaCesMplsStaticIngressTunnelFrmCosPolicydeprecated Frame CoS policy of the static encap tunnel.	FCosPolicy Type Values: 1 fixed 2 rcos-mapped	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.9
cienaCesMplsStaticIngressTunnelFrmCosMapIddeprecated The frame CoS map ID of the static encap tunnel. This value is valid if the frame CoS policy selected for the static encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of t…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.10
cienaCesMplsStaticIngressTunnelFixedExpdeprecated This object is deprecated and the new object to provide this information is cienaCesMplsStaticIngressTunnelFixedTC in this table.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.11
cienaCesMplsStaticIngressTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.12
cienaCesMplsStaticIngressTunnelFixedTTL If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.13
cienaCesMplsStaticIngressTunnelGrpIndex The group ID of the tunnel group of which the static encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.14
cienaCesMplsStaticIngressTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.16
cienaCesMplsStaticIngressTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.17
cienaCesMplsStaticIngressTunnelPrimaryTunnelNamedeprecated This object represents the primary tunnel it is protecting, if this is a backup tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.18
cienaCesMplsStaticIngressTunnelFixedTCdeprecated If the frame CoS policy for the static encap tunnel is fixed, this value is used for MPLS encapsulation.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.19
cienaCesMplsStaticIngressTunnelProtectionRole specifies the protection role of the static encap tunnel	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.20
cienaCesMplsStaticIngressTunnelProtectionState specifies the protection status of the static encap tunnel	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.21
cienaCesMplsStaticIngressTunnelProtectionPartnerName This object represents the primary tunnel it is protecting, if this is a backup tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.22
cienaCesMplsStaticIngressTunnelCosProfileIndex This object represents Cos profile index	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.23
cienaCesMplsStaticIngressTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.24
cienaCesMplsStaticIngressTunnelRecoveryDisjoint Specifies the type of Recovery Disjoint	Enumeration Enumerated Values: 1 none 2 link 3 node 4 srlg 5 unknown	.1.3.6.1.4.1.1271.2.1.18.1.1.2.1.25

The (conceptual) table listing the MPLS encap tunnels.

cienaCesMplsDynamicIngressTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.3.1

An entry in the dynamic encap tunnel table.

Indexes

cienaCesMplsDynamicIngressTunnelIndex

Column	Syntax	OID
cienaCesMplsDynamicIngressTunnelIndex This represents the unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.1
cienaCesMplsDynamicIngressTunnelName This represents the dynamic encap tunnel name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.2
cienaCesMplsDynamicIngressTunnelWeight A parameter to select the order of precedence of encap tunnels during tunnel switchover or reversion (if tunnel reversion is enabled). A higher weight indicates higher preference during switchover or reversion.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.3
cienaCesMplsDynamicIngressTunnelLspId A unique index within a tunnel group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.4
cienaCesMplsDynamicIngressTunnelNextHopIp Specifies the next hop IP address for the dynamic encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.5
cienaCesMplsDynamicIngressTunnelAdminState Specifies the administrative status of the dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.6
cienaCesMplsDynamicIngressTunnelOperState Specifies the operational status of the dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.7
cienaCesMplsDynamicIngressTunnelDestIpAddr Destination IP address of the dynamic encap tunnel. If not specified, the dynamic encap tunnel inherits the IP address of the tunnel group. This object cannot be modified once the dynamic encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.8
cienaCesMplsDynamicIngressTunnelLabel Label for the dynamic encap tunnel.	Integer32 Constraints: range: -1-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.9
cienaCesMplsDynamicIngressTunnelFrmCosPolicydeprecated Frame CoS policy of the dynamic encap tunnel.	Enumeration Enumerated Values: 1 fixed 2 rcos-mapped	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.10
cienaCesMplsDynamicIngressTunnelFrmCosMapIddeprecated The frame CoS map ID of the dynamic encap tunnel. This value is valid if the frame CoS policy selected for the dynamic encap tunnel is rcos-mapped. This value corresponds to the index cienaCesTceDpTsCosMapFcosMapId of…	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.11
cienaCesMplsDynamicIngressTunnelFixedExpdeprecated This object is deprecated and the new object to provide this information is cienaCesMplsDynamicIngressTunnelFixedTC in this table.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.12
cienaCesMplsDynamicIngressTunnelSetupPriority Indicates the set up priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.13
cienaCesMplsDynamicIngressTunnelHoldPriority Indicates the holding priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.14
cienaCesMplsDynamicIngressTunnelRecordRoute Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.15
cienaCesMplsDynamicIngressTunnelFastRoute Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.	Enumeration Enumerated Values: 1 none 2 link-protect 3 node-protect	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.16
cienaCesMplsDynamicIngressTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	Enumeration Enumerated Values: 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.17
cienaCesMplsDynamicIngressTunnelFixedTTL If the TTL policy for the dynamic encap tunnel is fixed, this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.18
cienaCesMplsDynamicIngressTunnelPathIndex Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.19
cienaCesMplsDynamicIngressTunnelPathName The path name corresponding to the pathIndex object.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.20
cienaCesMplsDynamicIngressTunnelGrpIndex The group id of the tunnel group of which the dynamic encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.21
cienaCesMplsDynamicIngressTunnelResourcePointer The OID must be one of the entries in mplsTunnelResourceTable.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.23
cienaCesMplsDynamicIngressTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.24
cienaCesMplsDynamicIngressTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.25
cienaCesMplsDynamicIngressTunnelBandwidthProfile This object represents the bandwidth profile attached to this tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.26
cienaCesMplsDynamicIngressTunnelPrimaryTunnelNamedeprecated This object represents the primary tunnel it is protecting, if this is a backup tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.27
cienaCesMplsDynamicIngressTunnelFixedTCdeprecated If the frame CoS policy for the dynamic encap tunnel is fixed, this value is used for MPLS encapsulation.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.28
cienaCesMplsDynamicIngressTunnelProtectionRole specifies the protection role of the static encap tunnel	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.29
cienaCesMplsDynamicIngressTunnelProtectionState specifies the protection status of the static encap tunnel	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.30
cienaCesMplsDynamicIngressTunnelProtectionPartnerName This object represents the primary tunnel it is protecting, if this is a backup tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.31
cienaCesMplsDynamicIngressTunnelCosProfileIndex This object represents Cos profile index	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.32
cienaCesMplsDynamicIngressTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.3.1.33

The (conceptual) table listing the MPLS decap tunnels.

cienaCesMplsStaticEgressTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.4.1

An entry in the static decap tunnel table.

Indexes

cienaCesMplsStaticEgressTunnelIndex

Column	Syntax	OID
cienaCesMplsStaticEgressTunnelIndex This represents the unique index in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.1
cienaCesMplsStaticEgressTunnelName This represents the decap tunnel name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.2
cienaCesMplsStaticEgressTunnelAdminState Administrative status of the static decap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.3
cienaCesMplsStaticEgressTunnelOperState Indicates the operational status of the static decap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.4
cienaCesMplsStaticEgressTunnelSourceIpAddr Source IP address of the static decap tunnel. This object cannot be modified once the static decap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.5
cienaCesMplsStaticEgressTunnelLabel Indicates the label of the static decap tunnel.	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.4.1.6

The (conceptual) table listing the MPLS dynamic decap tunnels.

cienaCesMplsDynamicEgressTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.5.1

An entry in the dynamic decap tunnel table.

Indexes

cienaCesMplsDynamicEgressTunnelIndex cienaCesMplsDynamicEgressTunnelInstance cienaCesMplsDynamicEgressTunnelSourceIpAddr cienaCesMplsDynamicEgressTunnelDestIpAddr

Column	Syntax	OID
cienaCesMplsDynamicEgressTunnelIndex This represents the unique index in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.1
cienaCesMplsDynamicEgressTunnelName This represents the dynamic decap tunnel name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.2
cienaCesMplsDynamicEgressTunnelAdminState Indicates the administrative status of the dynamic decap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.3
cienaCesMplsDynamicEgressTunnelOperState Indicates the operational status of the dynamic decap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.4
cienaCesMplsDynamicEgressTunnelInstance Indicates the LSP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.5
cienaCesMplsDynamicEgressTunnelSourceIpAddr Source IP address of the dynamic decap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.6
cienaCesMplsDynamicEgressTunnelDestIpAddr Destination IP address of the dynamic decap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.7
cienaCesMplsDynamicEgressTunnelLabel Idicates the label of the dynamic decap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.5.1.8

The (conceptual) table listing the MPLS static transit tunnels.

cienaCesMplsStaticTransitTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.6.1

An entry in the static transit tunnel table.

Indexes

cienaCesMplsStaticTransitTunnelIndex

Column	Syntax	OID
cienaCesMplsStaticTransitTunnelIndex This represents the unique index in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.1
cienaCesMplsStaticTransitTunnelName This represents the static transit tunnel name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.2
cienaCesMplsStaticTransitTunnelAdminState Indicates the administrative status of the static transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.3
cienaCesMplsStaticTransitTunnelOperState Indicates the operational status of the static transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.4
cienaCesMplsStaticTransitTunnelNextHopIpAddr Next hop IP address of the static transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.5
cienaCesMplsStaticTransitTunnelInLabel Indicates the incoming label of the static transit tunnel.	Integer32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.6
cienaCesMplsStaticTransitTunnelOutLabel Indicates the outgoing label of the static transit tunnel.	Integer32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.7
cienaCesMplsStaticTransitTunnelFcosPolicydeprecated Frame CoS policy of the static transit tunnel.	FCosPolicy Type Values: 1 fixed 2 rcos-mapped	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.8
cienaCesMplsStaticTransitTunnelFixedTcdeprecated If frame CoS policy for the static transit tunnel is fixed, this value is used for MPLS encapsulation.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.9
cienaCesMplsStaticTransitTunnelFrmCosMapIddeprecated The frame CoS map ID of the static transit tunnel. This value is valid if the frame cos policy selected for the static transit tunnel is rcos-mapped.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.10
cienaCesMplsStaticTransitTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.11
cienaCesMplsStaticTransitTunnelFixedTTL If the TTL policy for the static transit tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.12
cienaCesMplsStaticTransitTunnelRcosPolicydeprecated Resolved CoS policy of the static transit tunnel.	FCosPolicy Type Values: 1 fixed 2 rcos-mapped	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.13
cienaCesMplsStaticTransitTunnelRCosMapIddeprecated The resolved CoS map ID of the static transit tunnel. This value is valid if the resolved CoS policy selected for the static transit tunnel is rcos-mapped.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.14
cienaCesMplsStaticTransitTunnelCosProfileIndex This object represents Cos profile index	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.15
cienaCesMplsStaticTransitTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.16
cienaCesMplsStaticTransitTunnelSourceIpAddr Source IP address of the static transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.17
cienaCesMplsStaticTransitTunnelDestIpAddr Destination IP address of the static transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.18
cienaCesMplsStaticTransitTunnelIncomingPackets The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.19
cienaCesMplsStaticTransitTunnelOutgoingPackets The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.20
cienaCesMplsStaticTransitTunnelIncomingBytes The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.21
cienaCesMplsStaticTransitTunnelOutgoingBytes The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.6.1.22

The (conceptual) table listing the MPLS dynamic transit tunnels.

cienaCesMplsDynamicTransitTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.7.1

An entry in the dynamic transit tunnel table.

Indexes

cienaCesMplsDynamicTransitTunnelIndex

Column	Syntax	OID
cienaCesMplsDynamicTransitTunnelIndex This represents the unique index in the table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.1
cienaCesMplsDynamicTransitTunnelName This represents the dynamic transit tunnel name.	OctetString Constraints: range: 1-32	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.2
cienaCesMplsDynamicTransitTunnelAdminState Indicates the administrative status of the dynamic transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.3
cienaCesMplsDynamicTransitTunnelOperState Indicates the operational status of the dynamic transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.4
cienaCesMplsDynamicTransitTunnelInLabel Indicates the incoming label of the dynamic transit tunnel.	Integer32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.5
cienaCesMplsDynamicTransitTunnelOutLabel Indicates the outgoing label of the dynamic transit tunnel.	Integer32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.6
cienaCesMplsDynamicTransitTunnelNextHopIpAddr Next hop IP address of the Dynamic transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.7
cienaCesMplsDynamicTransitTunnelSourceIpAddr Source IP address of the static transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.8
cienaCesMplsDynamicTransitTunnelDestIpAddr Destination IP address of the static transit tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.9
cienaCesMplsDynamicTransitTunnelIncomingPackets The number of incoming packets for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.10
cienaCesMplsDynamicTransitTunnelOutgoingPackets The number of outgoing packets for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.11
cienaCesMplsDynamicTransitTunnelIncomingBytes The number of incoming bytes for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.12
cienaCesMplsDynamicTransitTunnelOutgoingBytes The number of outgoing bytes for the given transit tunnel. This object is supported only on specific platforms.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.7.1.13

The (conceptual) table listing the MPLS tunnel paths.
To create an entry in the tunnel path table, 
cienaCesMplsTunnelPathName and cienaCesMplsTunnelPathRowStatus 
must both be specified.

cienaCesMplsTunnelPathEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1

An entry in the tunnel path table.

Indexes

cienaCesMplsTunnelPathIndex

Column	Syntax	OID
cienaCesMplsTunnelPathIndex A unique index in the path entry table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.1
cienaCesMplsTunnelPathName Name associated with the path.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.2
cienaCesMplsTunnelPathUseCount Indicates the number of encap tunnels that are using this path.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.8.1.1.3

The (conceptual) table listing the MPLS tunnel path hop. 
To create an entry in the path-hop table, cienaCesMplsTunnelPathHopIpAddr 
and cienaCesMplsTunnelPathHopRowStatus must both be specified.

cienaCesMplsTunnelPathHopEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1

A tunnel hop entry.

Indexes

cienaCesMplsTunnelPathIndex cienaCesMplsTunnelPathHopIndex

Column	Syntax	OID
cienaCesMplsTunnelPathHopIndex Unique index in the path hop table.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.1
cienaCesMplsTunnelPathHopIpAddr IP address associated with this hop. This object cannot be modified once the path hop is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.2
cienaCesMplsTunnelPathHopType Indidcates the hop type of the path member. This object cannot be modified once the path hop is created.	Enumeration Enumerated Values: 1 strict 2 loose	.1.3.6.1.4.1.1271.2.1.18.1.1.8.2.1.3

Table of notification objects required for encap tunnel notification.

cienaCesMplsNotifEncapTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1

An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelTable.
No Get, GetNext or Set is allowed on this table.

Indexes

cienaCesMplsNotifEncapTunnelType cienaCesMplsNotifEncapTunnelIndex

Column	Syntax	OID
cienaCesMplsNotifEncapTunnelIndex Tunnel index of the encap tunnel associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.1
cienaCesMplsNotifEncapTunnelType Encap tunnel type of the encap tunnel associated with the notification.	Enumeration Enumerated Values: 1 static 2 dynamic 3 frr	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.2
cienaCesMplsNotifEncapTunnelName This represents the encap tunnel name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.3
cienaCesMplsNotifEncapTunnelAdminState Administrative state of the encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.4
cienaCesMplsNotifEncapTunnelOperState Operational state of the encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.5
cienaCesMplsNotifEncapTunnelOamFaulted Indication if the tunnel has Oam fault.	TunnelOamFault Type Values: 1 aisfault 2 bfdfault 3 aisbfdfault 4 nofault	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.6
cienaCesMplsNotifEncapTunnelFaultedNodeId IP address of the node with the AIS fault.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.9.1.1.7

Table of notification objects required for transit tunnel notification.

cienaCesMplsNotifTransitTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1

An entry (conceptual row) in the cienaCesMplsNotifTransitTunnelTable.
No Get, GetNext or Set is allowed on this table.

Indexes

cienaCesMplsNotifTransitTunnelType cienaCesMplsNotifTransitTunnelIndex

Column	Syntax	OID
cienaCesMplsNotifTransitTunnelIndex Tunnel index of the transit tunnel associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.1
cienaCesMplsNotifTransitTunnelType Transit tunnel type of the transit tunnel associated with the notification.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.2
cienaCesMplsNotifTransitTunnelName This represents the transit tunnel name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.3
cienaCesMplsNotifTransitTunnelAdminState Administrative state of the transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.4
cienaCesMplsNotifTransitTunnelOperState Operational state of the transit tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.5
cienaCesMplsNotifTransitTunnelOamFaulted Indication if the tunnel has Oam fault.	TunnelOamFault Type Values: 1 aisfault 2 bfdfault 3 aisbfdfault 4 nofault	.1.3.6.1.4.1.1271.2.1.18.1.1.10.1.1.6

Table of notification objects required for encap tunnel group notification.

cienaCesMplsNotifEncapTunnelGrpEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1

An entry (conceptual row) in the cienaCesMplsNotifEncapTunnelGrpTable.
No Get, GetNext or Set is allowed on this table.

Indexes

cienaCesMplsNotifEncapTunnelGrpIndex

Column	Syntax	OID
cienaCesMplsNotifEncapTunnelGrpIndex Tunnel group index of the encap tunnel associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.1
cienaCesMplsNotifEncapTunnelGrpName Tunnel group name of the encap tunnel associated with the notification.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.2
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlIndex Active Encap Tunnel index of the tunnel group associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.3
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlName Active Encap Tunnel name of the Tunnel group associated with the notification.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.4
cienaCesMplsNotifEncapTunnelGrpActiveEncapTunlType Encap tunnel type of the encap tunnel associated with the notification.	Enumeration Enumerated Values: 1 static 2 dynamic 3 frr	.1.3.6.1.4.1.1271.2.1.18.1.1.11.1.1.5

The table listing the MPLS Associated tunnels.

cienaCesMplsAssociatedTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.12.1

This represents an entry of the MPLS associated tunnel table.

Indexes

cienaCesMplsAssociatedTunnelIndex

Column	Syntax	OID
cienaCesMplsAssociatedTunnelIndex Unique index in the table. Specifies mpls associated tunnel index	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.1
cienaCesMplsAssociatedTunnelName specifies mpls associated tunnel name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.2
cienaCesMplsAssociatedForwardTunnelName specifies associated forward tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.3
cienaCesMplsAssociatedForwardTunnelType specifies associated forward tunnel type.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.4
cienaCesMplsAssociatedReverseTunnelName specifies associated reverse tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.5
cienaCesMplsAssociatedReverseTunnelType specifies associated reverse tunnel type.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.6
cienaCesMplsAssociatedForwardTunnelDestIpAddr specifies associated mpls forward tunnel destination IP address	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.7
cienaCesMplsAssociatedDynamicTunnelSrcIpAddr specifies associated mpls reverse tunnel source IP address.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.8
cienaCesMplsAssociatedTunnelAdminState Administrative status of associated tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.9
cienaCesMplsAssociatedTunnelOperState Operational status of associated tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.10
cienaCesMplsAssociatedForwardTunnelOperState Operational status of associated forward tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.11
cienaCesMplsAssociatedReverseTunnelOperState Operational status of associated reverse tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.12
cienaCesMplsAssociatedProtectionRole specifies the protection role of the associated tunnel	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.13
cienaCesMplsAssociatedProtectionState specifies the protection status of the associated tunnel	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.14
cienaCesMplsAssociatedTunnelProtectionPartnerName This object represents the tunnel name it is protecting	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.15
cienaCesMplsAssociatedBfdMonitoring Specifies status of BFD monitoring.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.16
cienaCesMplsAssociatedBfdProfileName This object represent BFD profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.17
cienaCesMplsAssociatedBfdSessionName Specifies BFD session name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.18
cienaCesMplsAssociatedBfdSessionFaulted Indicates if BFD is faulted.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.19
cienaCesMplsAssociatedBfdProfileIndex This represents the BFD profile index in the BFD profile table configured for this associated tunnel	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.12.1.20

The mplsTunnelARHopTable is used to indicate the
hops for an MPLS tunnel defined in mplsTunnelTable,
as reported by the MPLS signalling protocol. Thus at
a transit LSR, this table (if the table is supported
and if the signaling protocol is recording actual
route information) contains the actual route of the
whole tunnel. If the signaling protocol is not
recording the actual route, this table MAY report
the information from the mplsTunnelHopTable or the
mplsTunnelCHopTable.
          
Each row in this table is indexed by
mplsTunnelARHopListIndex. Each row also has a
secondary index mplsTunnelARHopIndex, corresponding
to the next hop that this row corresponds to.
          
Please note that since the information necessary to
build entries within this table is not provided by
some MPLS signalling protocols, implementation of
this table is optional. Furthermore, since the
information in this table is actually provided by
the MPLS signalling protocol after the path has
been set-up, the entries in this table are provided
only for observation, and hence, all variables in
this table are accessible exclusively as read-
only.
          
Note also that the contencts of this table may change
while it is being read because of re-routing
activities. A network administrator may verify that
the actual route read is consistent by reference to
the mplsTunnelLastPathChange object.

cienaCesMplsTunnelARHopEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.13.1

An entry in this table represents a tunnel hop. An
entry is created by the agent for signaled ERLSP
set up by an MPLS signalling protocol.

Indexes

cienaMplsTunnelARHopListIndex cienaMplsTunnelARHopIndex

Column	Syntax	OID
cienaMplsTunnelARHopListIndex Primary index into this table identifying a particular recorded hop list.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.1
cienaMplsTunnelARHopIndex Secondary index into this table identifying the particular hop.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.2
cienaMplsTunnelARHopAddrType The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.3
cienaMplsTunnelARHopIpAddr The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding mplsTunnelARHopAddrType. If mplsTunnelARHopAddrType is set to unnum(4), …	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.4
cienaMplsTunnelARHopAddrUnnum If mplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object should be used in conjunction with mplsTunnelARHopIpAddr which w…	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.5
cienaMplsTunnelARHopLspId If mplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should contain a value of 0 to indicate this fact.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.1.13.1.6

Table of notification objects required for associated tunnel
notification.

cienaCesMplsNotifAssociatedTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1

An entry (conceptual row) in the cienaCesMplsNotifAssociatedTunnelTable.
No Get, GetNext or Set is allowed on this table.

Indexes

cienaCesMplsNotifAssociatedTunnelType cienaCesMplsNotifAssociatedTunnelIndex

Column	Syntax	OID
cienaCesMplsNotifAssociatedTunnelIndex Tunnel index of the associated tunnel associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.1
cienaCesMplsNotifAssociatedTunnelType Associated tunnel type of the associated tunnel associated with the notification.	Enumeration Enumerated Values: 1 static 2 dynamic	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.2
cienaCesMplsNotifAssociatedTunnelName This represents the associated tunnel name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.3
cienaCesMplsNotifAssociatedTunnelAdminState Administrative state of the associated tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.4
cienaCesMplsNotifAssociatedTunnelOperState Operational state of the associated tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.5
cienaCesMplsNotifAssociatedTunnelOamFaulted Indication if the tunnel has Oam fault.	TunnelOamFault Type Values: 1 aisfault 2 bfdfault 3 aisbfdfault 4 nofault	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.6
cienaCesMplsNotifAssociatedTunnelFaultedNodeId IP address of the node with the AIS fault.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.1.14.1.1.7

Table of notification objects required for CAC interface notification.

cienaCesMplsNotifCacInterfaceEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1

An entry (conceptual row) in the cienaCesMplsNotifCACInterfaceTable.
No Get, GetNext or Set is allowed on this table.

Indexes

cienaCesMplsNotifCacInterfaceClassType cienaCesMplsNotifCacInterfaceIndex

Column	Syntax	OID
cienaCesMplsNotifCacInterfaceIndex CAC entry index associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.1
cienaCesMplsNotifCacInterfaceClassType CAC class type value of the associated interface associated with the notification.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.2
cienaCesMplsNotifCacInterfaceName This represents the associated interface name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.3
cienaCesMplsNotifCacInterfaceThreshold Alarm threshold value of the associated interface associated with the notification.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.1.15.1.1.4

The (conceptual) table listing the MPLS Class Profiles.

cienaCesMplsClassProfileEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.16.1

This represents an entry for MPLS Class Profile.

Indexes

cienaCesMplsClassProfileIndex

Column	Syntax	OID
cienaCesMplsClassProfileIndex This represents the unique index for MPLS Class Profile.	Unsigned32 Constraints: range: 1-500	.1.3.6.1.4.1.1271.2.1.18.1.1.16.1.1
cienaCesMplsClassProfileName This represents the MPLS Class Profile name.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.1.16.1.2
cienaCesMplsClassProfileCacPolicy MPLS Class Profile Cac policy.	CacPolicy Type Values: 1 invalid 2 mam 3 rdm	.1.3.6.1.4.1.1271.2.1.18.1.1.16.1.3

The (conceptual) table listing the MPLS Class Types.

cienaCesMplsTEClassTypeEntry row .1.3.6.1.4.1.1271.2.1.18.1.1.17.1

This represents an entry for MPLS Class Type.

Indexes

cienaCesMplsClassProfileIndex cienaCesMplsClassType

Column	Syntax	OID
cienaCesMplsClassType Indicates the MPLS Class Type value. Used as an Index in combination with MPLS Class Profile Index.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.1.17.1.1
cienaCesMplsClassTypeQueueGroupIndex Indicates the queue group index associated with MPLS Class Type.	Unsigned32 Constraints: range: 1-500	.1.3.6.1.4.1.1271.2.1.18.1.1.17.1.2
cienaCesMplsClassTypeQueueGroupInstance Indicates the instance for MPLS Class Type mapped to a particular queue group.	Unsigned32 Constraints: range: 1-65534	.1.3.6.1.4.1.1271.2.1.18.1.1.17.1.3
cienaCesMplsClassTypeLom Indicates the link multiplier value for the MPLS Class Type.	Unsigned32 Constraints: range: 1-4	.1.3.6.1.4.1.1271.2.1.18.1.1.17.1.4
cienaCesMplsClassTypeAlarmThreshold Indicates the Alarm Threshold percentage (%) for MPLS Class Type.	Unsigned32 Constraints: range: 0-100	.1.3.6.1.4.1.1271.2.1.18.1.1.17.1.5

The (conceptual) table listing the MPLS static encap tunnels.

cienaCesGmplsStaticIngressUniDirTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.2.1.1

This represents an entry of the MPLS static encap TP unidirectional tunnel table.

Indexes

cienaCesGmplsStaticIngressUniDirTunnelIndex

Column	Syntax	OID
cienaCesGmplsStaticIngressUniDirTunnelIndex Unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.1
cienaCesGmplsStaticIngressUniDirTunnelName This represents the encap tunnel name. Tunnel names are common across static and dynamic.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.2
cienaCesGmplsStaticIngressUniDirTunnelNextHopIp Specifies the next hop IP address for the static encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.3
cienaCesGmplsStaticIngressUniDirTunnelSrcIpAddr Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.4
cienaCesGmplsStaticIngressUniDirTunnelDestIpAddr Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.5
cienaCesGmplsStaticIngressUniDirTunnelAdminState Specifies the administrative status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.6
cienaCesGmplsStaticIngressUniDirTunnelOperState Specifies the operational status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.7
cienaCesGmplsStaticIngressUniDirTunnelForwardOutLabel The label for the static encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.8
cienaCesGmplsStaticIngressUniDirTunnelProtectionRole The label for the static encap tunnel.	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.9
cienaCesGmplsStaticIngressUniDirTunnelProtectionPartnerName Protection partner name of the static encap tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.10
cienaCesGmplsStaticIngressUniDirTunnelProtectionState Specifies the Protection status of the static encap tunnel.	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.11
cienaCesGmplsStaticIngressUniDirTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.12
cienaCesGmplsStaticIngressUniDirTunnelFixedTTL If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.13
cienaCesGmplsStaticIngressUniDirTunnelGrpIndex The group ID of the tunnel group of which the static encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.14
cienaCesGmplsStaticIngressUniDirTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.15
cienaCesGmplsStaticIngressUniDirTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.16
cienaCesGmplsStaticIngressUniDirTunnelCosProfileIndex This object represents Cos profile index	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.17
cienaCesGmplsStaticIngressUniDirTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.18
cienaCesGmplsStaticIngressUniDirTunnelRecoveryDisjoint Specifies the type of Recovery Disjoint	Enumeration Enumerated Values: 1 none 2 link 3 node 4 srlg 5 unknown	.1.3.6.1.4.1.1271.2.1.18.1.2.1.1.19

The (conceptual) table listing the MPLS static encap tunnels.

cienaCesGmplsStaticIngressCoroutedTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.2.2.1

This represents an entry of the MPLS static encap tunnel table.

Indexes

cienaCesGmplsStaticIngressCoroutedTunnelIndex

Column	Syntax	OID
cienaCesGmplsStaticIngressCoroutedTunnelIndex Unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.1
cienaCesGmplsStaticIngressCoroutedTunnelName This represents the encap tunnel name. Tunnel names are common across static and dynamic.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.2
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIp Specifies the next hop IP address for the static encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.3
cienaCesGmplsStaticIngressCoroutedTunnelSrcIpAddr Source IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.4
cienaCesGmplsStaticIngressCoroutedTunnelDestIpAddr Destination IP address of the static encap tunnel. If not specified, the static encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the static encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.5
cienaCesGmplsStaticIngressCoroutedTunnelAdminState Specifies the administrative status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.6
cienaCesGmplsStaticIngressCoroutedTunnelOperState Specifies the operational status of the static encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.7
cienaCesGmplsStaticIngressCoroutedTunnelForwardOutLabel The label for the static encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.8
cienaCesGmplsStaticIngressCoroutedTunnelReverseInLabel The label for the static encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.9
cienaCesGmplsStaticIngressCoroutedTunnelProtectionRole The label for the static encap tunnel.	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.10
cienaCesGmplsStaticIngressCoroutedTunnelProtectionPartnerName Protection partner name of the static encap tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.11
cienaCesGmplsStaticIngressCoroutedTunnelProtectionState Specifies the Protection status of the static encap tunnel.	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.12
cienaCesGmplsStaticIngressCoroutedTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.13
cienaCesGmplsStaticIngressCoroutedTunnelFixedTTL If the TTL policy for the static encap tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.14
cienaCesGmplsStaticIngressCoroutedTunnelGrpIndex The group ID of the tunnel group of which the static encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.15
cienaCesGmplsStaticIngressCoroutedTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.16
cienaCesGmplsStaticIngressCoroutedTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.17
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileIndex This object represents Cos profile index	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.18
cienaCesGmplsStaticIngressCoroutedTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.19
cienaCesGmplsStaticIngressCoroutedTunnelBfdMonitoring Specifies status of BFD monitoring.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.20
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileName This object represent BFD profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.21
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionName Specifies BFD session name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.22
cienaCesGmplsStaticIngressCoroutedTunnelAisMonitoring Specifies status of AIS monitoring.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.23
cienaCesGmplsStaticIngressCoroutedTunnelAisProfileName This object represent AIS profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.24
cienaCesGmplsStaticIngressCoroutedTunnelBfdSessionFaulted Indicates if BFD is faulted.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.25
cienaCesGmplsStaticIngressCoroutedTunnelBfdProfileIndex This represents the BFD profile index in the BFD profile table configured for this gmpls static ingress corouted tunnel	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.26
cienaCesGmplsStaticIngressCoroutedTunnelRecoveryDisjoint Specifies the type of Recovery Disjoint	Enumeration Enumerated Values: 1 none 2 link 3 node 4 srlg 5 unknown	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.27
cienaCesGmplsStaticIngressCoroutedTunnelNextHopIfNum This represents next hop interface number for this gmpls static ingress corouted tunnel	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.28
cienaCesGmplsStaticIngressCoroutedTunnelLspId This represents LSP ID for this gmpls static ingress corouted tunnel	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.29
cienaCesGmplsStaticIngressCoroutedTunnelSrcTunnelId This represents source tunnel ID for this gmpls static ingress corouted tunnel	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.30
cienaCesGmplsStaticIngressCoroutedTunnelDestTunnelId This represents destination tunnel ID for this gmpls static ingress corouted tunnel	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.2.1.31

The (conceptual) table listing the MPLS Dynamic encap tunnels.

cienaCesGmplsDynamicIngressUniDirTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.2.3.1

This represents an entry of the MPLS Dynamic encap tunnel table.

Indexes

cienaCesGmplsDynamicIngressUniDirTunnelIndex

Column	Syntax	OID
cienaCesGmplsDynamicIngressUniDirTunnelIndex Unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.1
cienaCesGmplsDynamicIngressUniDirTunnelName This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.2
cienaCesMplsDynamicIngressUniDirTunnelLspId A unique index within a tunnel group.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.3
cienaCesGmplsDynamicIngressUniDirTunnelNextHopIp Specifies the next hop IP address for the Dynamic encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.4
cienaCesGmplsDynamicIngressUniDirTunnelSrcIpAddr Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.5
cienaCesGmplsDynamicIngressUniDirTunnelDestIpAddr Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.6
cienaCesGmplsDynamicIngressUniDirTunnelAdminState Specifies the administrative status of the Dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.7
cienaCesGmplsDynamicIngressUniDirTunnelOperState Specifies the operational status of the Dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.8
cienaCesGmplsDynamicIngressUniDirTunnelForwardOutLabel The label for the Dynamic encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.9
cienaCesGmplsDynamicIngressUniDirTunnelProtectionRole The label for the Dynamic encap tunnel.	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.10
cienaCesGmplsDynamicIngressUniDirTunnelProtectionPartnerName Protection partner name of the Dynamic encap tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.11
cienaCesGmplsDynamicIngressUniDirTunnelProtectionState Specifies the Protection status of the Dynamic encap tunnel.	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.12
cienaCesGmplsDynamicIngressUniDirTunnelTTLPolicy Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.13
cienaCesGmplsDynamicIngressUniDirTunnelFixedTTL If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.14
cienaCesGmplsDynamicIngressUniDirTunnelGrpIndex The group ID of the tunnel group of which the Dynamic encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.15
cienaCesGmplsDynamicIngressUniDirTunnelReversion Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.16
cienaCesGmplsDynamicIngressUniDirTunnelReversionTimeout This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.17
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileIndex This object represents Cos profile index	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.18
cienaCesGmplsDynamicIngressUniDirTunnelCosProfileName Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.19
cienaCesGmplsDynamicIngressUniDirTunnelRecordRoute Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.20
cienaCesGmplsDynamicIngressUniDirTunnelFastRoute Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.	Enumeration Enumerated Values: 1 none 2 link-protect 3 node-protect	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.21
cienaCesGmplsDynamicIngressUniDirTunnelSetupPriority Indicates the set up priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.22
cienaCesGmplsDynamicIngressUniDirTunnelHoldPriority Indicates the holding priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.23
cienaCesGmplsDynamicIngressUniDirTunnelPathIndex Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.24
cienaCesGmplsDynamicIngressUniDirTunnelPathName The path name corresponding to the pathIndex object.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.25
cienaCesGmplsDynamicIngressUniDirTunnelBandwidthProfile This object represents the bandwidth profile attached to this tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.26
cienaCesGmplsDynamicIngressUniDirTunnelResourcePointer The OID must be one of the entries in mplsTunnelResourceTable.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.27
cienaCesGmplsDynamicIngressUniDirArHopIndex This object represents the ArHop index of this tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.3.1.28

The (conceptual) table listing the MPLS Dynamic encap co-routed tunnels.
This table and all of it's objects are obsolete, instead of this
cienaCesGmplsDynamicIngressCoroutedExtTunnelTable will be in use for 
Dynamic Ingress CoRouted Tunnels.

cienaCesGmplsDynamicIngressCoroutedTunnelEntry row .1.3.6.1.4.1.1271.2.1.18.1.2.4.1

This represents an entry of the MPLS Dynamic encap co-routed tunnel table.

Indexes

cienaCesGmplsDynamicIngressCoroutedTunnelIndex

Column	Syntax	OID
cienaCesGmplsDynamicIngressCoroutedTunnelIndexobsolete Unique index in the table.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.1
cienaCesGmplsDynamicIngressCoroutedTunnelNameobsolete This represents the encap tunnel name. Tunnel names are common across Dynamic and dynamic.	OctetString Constraints: range: 1-31	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.2
cienaCesGmplsDynamicIngressCoroutedTunnelNextHopIpobsolete Specifies the next hop IP address for the Dynamic encap tunnel.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.3
cienaCesGmplsDynamicIngressCoroutedTunnelSrcIpAddrobsolete Source IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.4
cienaCesGmplsDynamicIngressCoroutedTunnelDestIpAddrobsolete Destination IP address of the Dynamic encap tunnel. If not specified, the Dynamic encap tunnel inherits the IP address of the tunnel-group. This object cannot be modified once the Dynamic encap tunnel entry is created.	SNMPv2-SMIIpAddress Type Constraints: range: 4	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.5
cienaCesGmplsDynamicIngressCoroutedTunnelAdminStateobsolete Specifies the administrative status of the Dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.6
cienaCesGmplsDynamicIngressCoroutedTunnelOperStateobsolete Specifies the operational status of the Dynamic encap tunnel.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.7
cienaCesGmplsDynamicIngressCoroutedTunnelForwardOutLabelobsolete The label for the Dynamic encap tunnel.	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.8
cienaCesGmplsDynamicIngressCoroutedTunnelReverseInLabelobsolete The label for the Dynamic encap tunnel.	Unsigned32 Constraints: range: 0-1048575	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.9
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionRoleobsolete The label for the Dynamic encap tunnel.	Enumeration Enumerated Values: 0 none 1 primary 2 backup	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.10
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionPartnerNameobsolete Protection partner name of the Dynamic encap tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.11
cienaCesGmplsDynamicIngressCoroutedTunnelProtectionStateobsolete Specifies the Protection status of the Dynamic encap tunnel.	Enumeration Enumerated Values: 0 standby 1 active	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.12
cienaCesGmplsDynamicIngressCoroutedTunnelTTLPolicyobsolete Specifies whether TTL is fixed or inherited from the frame.	TTLPolicy Type Values: 0 decrement 1 fixed 2 inherit	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.13
cienaCesGmplsDynamicIngressCoroutedTunnelFixedTTLobsolete If the TTL policy for the Dynamic encap tunnel is fixed, then this object is the TTL value.	Unsigned32 Constraints: range: 1-255	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.14
cienaCesGmplsDynamicIngressCoroutedTunnelGrpIndexobsolete The group ID of the tunnel group of which the Dynamic encap tunnel is a member.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.15
cienaCesGmplsDynamicIngressCoroutedTunnelReversionobsolete Indicates whether tunnel reversion is turned on/off for this encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.16
cienaCesGmplsDynamicIngressCoroutedTunnelReversionTimeoutobsolete This object represents the tunnel reversion hold time in seconds before the primary encap tunnel switches back as active tunnel in its tunnel group.	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.17
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileIndexobsolete This object represents Cos profile index	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.18
cienaCesGmplsDynamicIngressCoroutedTunnelCosProfileNameobsolete Specifies the name of Cos profile	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.19
cienaCesGmplsDynamicIngressCoroutedTunnelRecordRouteobsolete Indicates whether or not an FRR (fast re-route) tunnel needs to be created for this dynamic encap tunnel.	Enumeration Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.20
cienaCesGmplsDynamicIngressCoroutedTunnelFastRouteobsolete Indicates the fast route method for the dynamic encap tunnel. This object cannot be modified once the dynamic encap tunnel entry is created.	Enumeration Enumerated Values: 1 none 2 link-protect 3 node-protect	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.21
cienaCesGmplsDynamicIngressCoroutedTunnelSetupPriorityobsolete Indicates the set up priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.22
cienaCesGmplsDynamicIngressCoroutedTunnelHoldPriorityobsolete Indicates the holding priority of the dynamic encap tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.23
cienaCesGmplsDynamicIngressCoroutedTunnelPathIndexobsolete Index into the cienaCesmplsTunnelPathTable entry that specifies the explicit route hops for this dynamic encap tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.24
cienaCesGmplsDynamicIngressCoroutedTunnelPathNameobsolete The path name corresponding to the pathIndex object.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.25
cienaCesGmplsDynamicIngressCoroutedTunnelBandwidthProfileobsolete This object represents the bandwidth profile attached to this tunnel.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.26
cienaCesGmplsDynamicIngressCoroutedTunnelResourcePointerobsolete The OID must be one of the entries in mplsTunnelResourceTable.	SNMPv2-TCRowPointer Description: Represents a pointer to a conceptual row. The value is the name of the instance of the first accessible columnar object in the conceptual row. For example, ifIndex.3 would point to the 3rd row in the ifTable…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.27
cienaCesGmplsDynamicIngressCoroutedTunnelBfdMonitoringobsolete Specifies status of BFD monitoring.	CIENA-TCCienaGlobalState Type Values: 1 enabled 2 disabled	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.28
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileNameobsolete This object represent BFD profile name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.29
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionNameobsolete Specifies BFD session name.	SNMPv2-TCDisplayString Type Constraints: range: 0..255 Description: Represents textual information taken from the NVT ASCII character set, as defined in pages 4, 10-11 of RFC 854. To summarize RFC 854, the NVT ASCII repertoire specifies: - the use of c…	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.30
cienaCesGmplsDynamicIngressCoroutedTunnelBfdSessionFaultedobsolete Indicates if BFD is faulted.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.31
cienaCesGmplsDynamicIngressCoroutedTunnelBfdProfileIndexobsolete This represents the BFD profile index in the BFD profile table configured for this gmpls dynamic ingress corouted tunnel	Unsigned32 Constraints: range: 1-65535	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.32
cienaCesGmplsDynamicIngressCoroutedTunnelAutoBackupEnableobsolete Indicates if auto-backup is enabled for this tunnel and always remains 0 in case of backup tunnel.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.33
cienaCesGmplsDynamicIngressCoroutedTunnelLspReoptimizationobsolete Indicates if Lsp-Reoptimization is enabled or disabled for this tunnel.	MplsGlobalState Type Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.34
cienaCesGmplsDynamicIngressCoroutedTunnelLspReOptTimeIntervalobsolete Indicates Lsp-Reoptimization Time interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.	Unsigned32 Constraints: range: 5-60	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.35
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointTypeobsolete Indicates path diversification criteria used for this tunnel. It can either be node based or srlg based or link based or combination.	PathDisjointType Type Values: 1 unknown 2 none 3 link 4 srlg 5 node 6 srlgAndNode 7 srlgOrNode 8 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.36
cienaCesGmplsDynamicIngressCoroutedTunnelPathDisjointModeobsolete Indicates mode used for path diversification for this tunnel .	PathDisjointMode Type Values: 1 none 2 strict 3 maximal 4 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.37
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeEnableobsolete Indicates if auto-size is enabled for this tunnel.	MplsGlobalState Type Values: 1 enabled 2 disabled 3 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.38
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeIntervalobsolete Indicates auto-sizing interval(in minutes) for this tunnel and always remains 0 in case of backup tunnel.	Unsigned32 Constraints: range: 5-60	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.39
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeFailureHdlrobsolete Indicates auto-sizing failure handler for this tunnel.	AutoSizeFailHdlr Type Values: 1 none 2 alarm 3 mbb 4 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.40
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeStateobsolete Indicates dynamic auto-sizing states for this tunnel.	AutoSizeState Type Values: 1 ok 2 upsizeInProgress 3 upsizeFailed 4 downsizeInProgress 5 downsizeFailed 6 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.41
cienaCesGmplsDynamicIngressCoroutedTunnelAutoSizeModeobsolete Indicates auto-sizing mode for this tunnel.	AutoSizeMode Type Values: 1 none 2 cac 3 utilization 4 notApplicable	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.42
cienaCesGmplsDynamicIngressCoroutedTunnelMinBandwidthobsolete Indicates auto-size minimum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.43
cienaCesGmplsDynamicIngressCoroutedTunnelMaxBandwidthobsolete Indicates auto-size maximum bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.44
cienaCesGmplsDynamicIngressCoroutedTunnelIncBandwidthobsolete Indicates auto-size increment bandwidth(in kbps) for this tunnel and always remains 0 in case of backup tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.45
cienaCesGmplsDynamicIngressCoroutedTunnelCurBandwidthobsolete Indicates auto-size current bandwidth(in kbps) for this tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.46
cienaCesGmplsDynamicIngressCoroutedTunnelReqBandwidthobsolete Indicates auto-size requested bandwidth(in kbps) for this tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.47
cienaCesGmplsDynamicIngressCoroutedTunnelUsedBandwidthobsolete Indicates auto-size used bandwidth(in kbps) for this tunnel.	MPLS-TC-STD-MIBMplsBitRate Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.48
cienaCesGmplsDynamicIngressCoroutedTunnelClassTypeobsolete Indicates the DSTE class type (CT0-CT7) mapped to this Tunnel.	Unsigned32 Constraints: range: 0-7	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.49
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAllobsolete Resource affinity Admin Color-Group which is applied in include-all colors mode to constrain path selection and always remains 0 in case of backup tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.50
cienaCesGmplsDynamicIngressCoroutedTunnelResourceIncludeAnyobsolete Resource affinity Admin Color-Group which is applied in include-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.51
cienaCesGmplsDynamicIngressCoroutedTunnelResourceExcludeAnyobsolete Resource affinity Admin Color-Group which is applied in exclude-any colors mode to constrain path selection and always remains 0 in case of backup tunnel.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.52
cienaCesGmplsDynamicIngressCoroutedLspId Indicates the Ingress LSP ID.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.1271.2.1.18.1.2.4.1.53