CIENA-CES-IP-INTERFACE-MIB

        This module defines the IP interface related notifications.
    
Source file
CIENA-CES-IP-INTERFACE-MIB
Last revised
Identity
cienaCesIpInterfaceMIB
Base OID
1.3.6.1.4.1.1271.2.1.8
Net-SNMP examples using the ciena MIB directory Show commands

These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.

Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CIENA-CES-IP-INTERFACE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CIENA-CES-IP-INTERFACE-MIB::cienaCesIpInterfaceMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-IP-INTERFACE-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-IP-INTERFACE-MIB::cienaCesIpInterfaceMIB'
How SNMP, Net-SNMP, MIB paths, and variants work
Objects (55)
.1.3.6.1.4.1.1271.2.1.8
.1.3.6.1.4.1.1271.2.1.8.1
.1.3.6.1.4.1.1271.2.1.8.1.1
.1.3.6.1.4.1.1271.2.1.8.1.1.1
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1
Integer32
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.1
OctetString
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.2
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.3
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.4
Enumeration
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.5
Enumeration
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.6
Enumeration
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.7
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.8
.1.3.6.1.4.1.1271.2.1.8.1.1.1.1.9
.1.3.6.1.4.1.1271.2.1.8.1.1.2
.1.3.6.1.4.1.1271.2.1.8.1.1.3
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.1
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.10
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.11
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.12
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.13
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.14
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.15
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.16
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.17
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.18
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.19
OctetString
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.2
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.20
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.21
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.22
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.23
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.24
Enumeration
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.25
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.3
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.4
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.5
Enumeration
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.6
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.7
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.8
.1.3.6.1.4.1.1271.2.1.8.1.1.3.1.9
.1.3.6.1.4.1.1271.2.1.8.1.1.4
.1.3.6.1.4.1.1271.2.1.8.1.1.5
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1.1
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1.2
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1.3
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1.4
.1.3.6.1.4.1.1271.2.1.8.1.1.5.1.5
.1.3.6.1.4.1.1271.2.1.8.3
.1.3.6.1.4.1.1271.2.1.8.3.1
.1.3.6.1.4.1.1271.2.1.8.3.2
.1.3.6.1.4.1.1271.2.2.8
.1.3.6.1.4.1.1271.2.2.8.0
Dependencies (6) 6 direct Show tree and compile order Hide dependency details

Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.

Dependency tree
Dependency-first compile order
  1. SNMPv2-SMIrfc
  2. CIENA-SMIciena
  3. SNMPv2-TCrfc
  4. CIENA-TCciena
  5. CIENA-GLOBAL-MIBciena
  6. INET-ADDRESS-MIBrfc
  7. CIENA-CES-IP-INTERFACE-MIBcienaselected
Notifications / Traps (2)
NameOIDDescription
.1.3.6.1.4.1.1271.2.2.8.0.1
A cienaCesIpMgmtInterfaceAddrChgNotification is sent when the
IP address of an interface changes. To enable the device to send
this notification, cienaCesIPMgmtInterfaceAddrChangeTrapState
needs to be set to enabled. The cienaCesIPMgmtInterfaceAddrChangeTrapState
is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, cienaCesIpMgmtInterfaceName,
cienaCesIpMgmtInterfaceOperIpAddr, and cienaCesIpMgmtInterfaceOperSubnet.
.1.3.6.1.4.1.1271.2.2.8.0.2
A cienaCesIpMgmtInterfaceGatewayChgNotification is sent when the
IP address of an interface gateway changes. To enable the device to send
this notification, cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState needs
to be set to enabled. The cienaCesIPMgmtInterfaceGatewayAddrChangeTrapState
is set to enabled by default. Variable bindings include: cienaGlobalSeverity,
cienaGlobalMacAddress, and cienaCesIpGatewayAddr.