CIENA-CES-ICL-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
27

cienaCesIclTable

table
.1.3.6.1.4.1.1271.2.1.32.1.1.1 · 1 row entry · 27 columns
Open in standard view
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesIclTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-ICL-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-ICL-MIB::cienaCesIclTable' 
The table lists all the Inter-chassis Links (ICLs).
cienaCesIclEntry row .1.3.6.1.4.1.1271.2.1.32.1.1.1.1
An entry in the cienaCesIclTable.
Indexes
Column Syntax OID
cienaCesIclIndex
ICL Index for this entry
Unsigned32
Constraints:
range: 1-47
range: 0-255
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.1
cienaCesIclName
This object specifies the name of this ICL Entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.2
cienaCesIclRemoteMacAddress
This object specifies the remote MAC address of this ICL Entry.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.3
cienaCesIclType
This object specifies the Inter-chassis link type.
Enumeration
Enumerated Values:
1vlan
2mplsVs
3qinqVs
4none
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.4
cienaCesIclVlan
This object specifies the ICL VLAN. This is valid only if cienaCesIclType is vlan(1).
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.5
cienaCesIclVsName
This object specifies the Virtual Switch assosiated to this ICL Entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.6
cienaCesIclCfmServicePrimary
This object specifies primary CFM service for the ICL Entry.
SNMPv2-TCDisplayString
Constraints:
range: 1-65535
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.7
cienaCesIclCfmServiceSecondary
This object specifies secondary CFM service for the ICL Entry.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.8
cienaCesIclOperState
This object specifies the operational state for the ICL Entry.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.9
cienaCesIclStatus
This object specifies the ICL StateMachine status.
Enumeration
Enumerated Values:
1init
2active
3failed
4down
5none
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.10
cienaCesIclAdminState
This object specifies the admin state of the ICL Entry.
CIENA-TCCienaGlobalState
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.11
cienaCesIclCfmFault
This object specifies if CFM fault is set on the ICL.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.12
cienaCesIclVplsFault
This object specifies if VPLS fault is set on the ICL.
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.13
cienaCesIclRxTimeout
This object specifies if Rx timeout fault is set on the ICL
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.14
cienaCesIclIntervalMismatch
This object specifies if interval mismatch fault is set on the ICL
Enumeration
Enumerated Values:
1no
2yes
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.15
cienaCesIclHeartbeatInterval
This object specifies the ICL heartbeat interval. The range is 1 to 30sec.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.16
cienaCesIclUpTime
This object specifies total time for which the ICL has been operationally up.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.17
cienaCesIclTotalDownTime
This object specifies total time for which the ICL has been operationally down.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.18
cienaCesIclRxFrames
This object specifies the number of CICP frames received by the ICL.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.19
cienaCesIclTxFrames
This object specifies the number of CICP frames transmitted by the ICL.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.20
cienaCesIclRxUnknownFrames
This object specifies the number of unknown frames received by the ICL.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.21
cienaCesIclRxHtbtFrames
This object specifies the number of Hearbeat frames received by the ICL.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.22
cienaCesIclTxHtbtFrames
This object specifies the number of Hearbeat frames transmitted by the ICL.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.23
cienaCesIclTxFailedFrames
This object specifies the number of failed to transmit frames.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.24
cienaCesIclNumberFailures
This object specifies the number of ICL failures.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.25
cienaCesIclRxConfigMismatch
This object specifies the number of ICL config mismatch frames received.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.26
cienaCesIclRxTimeoutMultiplier
This object specifies the ICL Rx Timeout multiplier.
ICL Rx Timeout interval = (ICL heartbeat interval) * (Rx Timeout multiplier)
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.1271.2.1.32.1.1.1.1.27