CIENA-CES-EXT-LAG-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
2
Rows
2
Columns
43
.1.3.6.1.4.1.1271.2.1.3.1.1.3 · 1 row entry · 42 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesExtLagTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-EXT-LAG-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-EXT-LAG-MIB::cienaCesExtLagTable'
The (conceptual) table listing all the LAGs.
cienaCesExtLagEntry row .1.3.6.1.4.1.1271.2.1.3.1.1.3.1
An entry (conceptual row) in the cienaCesExtLagTable.
Column Syntax OID
Object that specifies a unique entry in the
cienaCesExtLagTable. A management station wishing
to create a LAG should use a pseudo-random value
for this object when creating an instance of a
cienaCesExtLagEntry.
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.1
The name assigned to this LAG by the management
station. This object can only be set while creating the LAG. The LAG
cannot be renamed once it is created.
OctetString
Constraints:
range: 1-32
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.2
The unique identifier allocated to this LAG by
the local system. This attribute identifies an
LAG instance among the subordinate managed
objects of the containing object.
This value is read-only. This object refers to …
Integer32
Constraints:
range: 1-2147483647
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.3
This object specifies the mode in which the given aggregation is operating.
Enumeration
Enumerated Values:
1lacp
2manual
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.4
This object specifies that if the primary port goes from operationally disabled to operationally enabled it
shall become active, and one of the secondary ports shall become backup if this MIB object is set to 'on' and …
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.5
This object specifies the revert protection timer value.
msecInteger32
Constraints:
range: 0-60000
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.6
This object specifies the total number of member ports present in the LAG group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.7
This object specifies the total number of protection member ports present in the LAG group.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.8
This object specifies the LACP protection-mode in which the given aggregation is operating.
Enumeration
Enumerated Values:
1proprietary
2standard
3none
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.9
This object specifies the inter-chassis link name that the multi-chassis LAG is using.
SNMPv2-TCDisplayString
Type Constraints:
range: 0..255
Description:
Represents textual information taken from the NVT ASCII

character set, as defined in pages 4, 10-11 of RFC 854.

To summarize RFC 854, the NVT ASCII repertoire specifies:

- the use of c…
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.10
This object specifies if the MC-LAG node is primary or backup
Enumeration
Enumerated Values:
1primary
2backup
3none
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.11
This object specifies the MC-LAG RG node ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.12
This object specifies the MC-LAG RG node dynamically assigned priority.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.13
This object specifies the MC-LAG RG node operational key.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.14
This object specifies the oper state of the MC-LAG node
Enumeration
Enumerated Values:
1down
2unavailable
3active
4standby
5standalone
6none
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.15
This object specifies the Connect State of the MC-LAG node.
Enumeration
Enumerated Values:
1init
2disconnected
3connected
4mismatch
5none
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.16
This object specifies the Mismatch Status of the MC-LAG node.
Enumeration
Enumerated Values:
1no
2rgpeer
3partner
4version
5none
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.17
This object specifies the MC-LAG peer node system MAC address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.18
This object specifies the MC-LAG peer RG node ID.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.19
This object specifies the MC-LAG peer RG node dynamically assigned priority.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.20
This object specifies the MC-LAG peer RG node operational key.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.21
This object specifies number of ports added to the MC-LAG peer RG node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.22
This object specifies number of ports available to the MC-LAG peer RG node.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.23
This object specifies the number of Disconnect messages received by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.24
This object specifies the number of Disconnect messages transmitted by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.25
This object specifies the number of mismatch config messages received by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.26
This object specifies the number of messages received with mismatching key by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.27
This object specifies the number of out of sequence messages received by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.28
This object specifies the number of times peer was unreachable.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.29
This object specifies the number unknown messages received by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.30
This object specifies the total number of messages received by the MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.31
This object specifies the total number of messages transmitted by MC-LAG node.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.32
This object specifies total time for which the MC-LAG node has been operationally down.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.33
This object specifies time for which the MC-LAG node has been operationally up.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.34
This object specifies time for which the MC-LAG node has been in protection state.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.35
This object specifies time of day of the last MC-LAG protection switching.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.36
This object specifies the number of MC-LAG protection switching.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.37
This object specifies if the LAG is an MC-LAG
Enumeration
Enumerated Values:
1yes
2no
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.38
This object enables minimum link aggregation mode for the LAG group
Enumeration
Enumerated Values:
1on
2off
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.39
This object specifies minimum link threshold value for minimum link aggregation mode.
Integer32
Constraints:
range: 1-8
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.40
This object displays current value of Admin state of the LAG group
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.41
This object displays current value of Oper State of the LAG group
Enumeration
Enumerated Values:
1up
2down
.1.3.6.1.4.1.1271.2.1.3.1.1.3.1.42
.1.3.6.1.4.1.1271.2.1.3.1.1.4 · 1 row entry · 1 columns
Uses the ciena variant from /opt/observium/mibs/ciena.
Command help
Walk cienaCesLagProtectionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CIENA-CES-EXT-LAG-MIB' -M '/opt/observium/mibs/ciena:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CIENA-CES-EXT-LAG-MIB::cienaCesLagProtectionTable'
The (conceptual) table listing the protection ports for each aggregation.
cienaCesLagProtectionEntry row .1.3.6.1.4.1.1271.2.1.3.1.1.4.1
An entry (conceptual row) in the cienaCesLagProtectionTable.
Column Syntax OID
This object specifies the protection port number. It is also used as an index in the table.
Integer32
Constraints:
range: 1-65535
.1.3.6.1.4.1.1271.2.1.3.1.1.4.1.1