CERENT-OPTICAL-MONITOR-MIB Table View

This table provides objects to monitor optical
parameters in a network element. It also provides
objects for setting high and low threshold levels, with
configurable severities, on these monitored parameters.

cOpticalMonEntry row .1.3.6.1.4.1.3607.2.30.1.1.1

An entry in the cOpticalMonTable provides objects to
monitor an optical parameter and set threshold levels
on that parameter, at an optical interface.

Note that the set of monitored optical parameters may v…

Indexes

IF-MIBifIndex cOpticalMonDirection cOpticalMonParameterType

Column	Syntax	OID
cOpticalMonDirection This object is an index into the cOpticalMonTable and indicates the direction monitored for the optical interface, in this entry.	OpticalIfDirection Type Values: 1 receive 2 transmit 3 notApplicable	.1.3.6.1.4.1.3607.2.30.1.1.1.1
cOpticalMonParameterType This object is an index into the cOpticalMonTable and specifies the optical parameter that is being monitored, in this entry.	OpticalParameterType Type Values: 1 power 2 acPower 3 apdTemp 4 laserTemp 5 biasCurrent 6 peltierCurrent 7 xcvrVoltage 8 voa 9 gain 10 oscPower 11 addPower	.1.3.6.1.4.1.3607.2.30.1.1.1.2
cOpticalParameterValue This object gives the value measured for the particular optical parameter specified by the cOpticalMonParameterType object.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.3
cOpticalParamHighAlarmThresh This object is used to set a high alarm threshold on the optical parameter being monitored. If the measured value of the parameter,is greater than the value configured in this object, an alarm will be r…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.4
cOpticalParamHighWarning15MinThresh This object is used to set a high warning 15 minute threshold on the optical parameter being monitored. If the measured value of the parameter,is greater than the value configured in this object, an al…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.5
cOpticalParamHighWarning1DayThresh This object is used to set a high warning 1 day threshold on the optical parameter being monitored. If the measured value of the parameter,is greater than the value configured in this object, an alarm …	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.6
cOpticalParamLowAlarmThresh This object is used to set a low alarm threshold on the optical parameter being monitored. If the measured value of the parameter,goes lower than the value configured in this object, an alarm will be ra…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.7
cOpticalParamLowWarning15MinThresh This object is used to set a low warning 15 minute threshold on the optical parameter being monitored. If the measured value of the parameter,goes lower than the value configured in this object, an alar…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.8
cOpticalParamLowWarning1DayThresh This object is used to set a low warning 1 day threshold on the optical parameter being monitored. If the measured value of the parameter,goes lower than the value configured in this object, an alarm w…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.9
cOpticalParamLowDegradeThresh This object is used to set a low degrade threshold on the optical parameter being monitored. If the measured value of the parameter,goes lower than the value configured in this object, a degrade alarm …	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.10
cOpticalParamHighDegradeThresh This object is used to set a high degrade threshold on the optical parameter being monitored. If the measured value of the parameter,goes lower than the value configured in this object, a degrade alarm…	OpticalParameterValuer/w Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.1.1.1.11

This table stores performance monitoring data for the
various optical parameters, collected over the current
interval.

cOpticalPMCurrentEntry row .1.3.6.1.4.1.3607.2.30.2.1.1

An entry in the cOpticalPMCurrentTable. It contains
performance monitoring data for an optical parameter,
collected over the current interval.

Note that the set of monitored optical parameters may vary
base…

Indexes

IF-MIBifIndex cOpticalPMCurrentDirection cOpticalPMCurrentParamType cOpticalPMCurrentPeriod

Column	Syntax	OID
cOpticalPMCurrentDirection This object is an index into the cOpticalPMCurrentTable and indicates the direction monitored for the optical interface, in this entry.	OpticalIfDirection Type Values: 1 receive 2 transmit 3 notApplicable	.1.3.6.1.4.1.3607.2.30.2.1.1.1
cOpticalPMCurrentParamType This object is an index into the cOpticalPMCurrentTable and specifies the optical parameter that is being monitored, in this entry.	OpticalParameterType Type Values: 1 power 2 acPower 3 apdTemp 4 laserTemp 5 biasCurrent 6 peltierCurrent 7 xcvrVoltage 8 voa 9 gain 10 oscPower 11 addPower	.1.3.6.1.4.1.3607.2.30.2.1.1.2
cOpticalPMCurrentPeriod This object is an index into the cOpticalPMCurrentTable and indicates whether the optical parameter values given in this entry, are collected over a period of 15 minutes or 24 hours.	CERENT-TCCerentPeriod Type Values: 1 unknown 5 minutes1 10 minutes15 20 hour1 30 day1	.1.3.6.1.4.1.3607.2.30.2.1.1.3
cOpticalPMCurrentMaxParam This object gives the maximum value measured for the optical parameter, in the current 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.1.1.4
cOpticalPMCurrentMinParam This object gives the minimum value measured for the optical parameter, in the current 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.1.1.5
cOpticalPMCurrentMeanParam This object gives the average value of the measured optical parameter, in the current 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.1.1.6

This table stores performance monitoring data for the
various optical parameters, collected over current and 
previous intervals.
          
This table can have entries for up to 96 complete 15 minute  
intervals.

cOpticalPMIntervalEntry row .1.3.6.1.4.1.3607.2.30.2.2.1

An entry in the cOpticalPMIntervalTable. It contains
performance monitoring data for an optical parameter,
collected over current and previous intervals.

Note that the set of monitored optical parameters ma…

Indexes

IF-MIBifIndex cOpticalPMIntervalDirection cOpticalPMIntervalParamType cOpticalPMIntervalPeriod cOpticalPMIntervalNumber

Column	Syntax	OID
cOpticalPMIntervalDirection This object is an index into the cOpticalPMIntervalTable and indicates the direction monitored for the optical interface, in this entry.	OpticalIfDirection Type Values: 1 receive 2 transmit 3 notApplicable	.1.3.6.1.4.1.3607.2.30.2.2.1.1
cOpticalPMIntervalParamType This object is an index into the cOpticalPMIntervalTable and specifies the optical parameter that is being monitored, in this entry.	OpticalParameterType Type Values: 1 power 2 acPower 3 apdTemp 4 laserTemp 5 biasCurrent 6 peltierCurrent 7 xcvrVoltage 8 voa 9 gain 10 oscPower 11 addPower	.1.3.6.1.4.1.3607.2.30.2.2.1.2
cOpticalPMIntervalPeriod This object is an index into the cOpticalPMIntervalTable and indicates whether the optical parameter values given in this entry, are collected over a period of 15 minutes or 24 hours.	CERENT-TCCerentPeriod Type Values: 1 unknown 5 minutes1 10 minutes15 20 hour1 30 day1	.1.3.6.1.4.1.3607.2.30.2.2.1.3
cOpticalPMIntervalNumber This object is an index into the cOpticalPMIntervalTable. It is a number between 1 and 96, which identifies the interval for which the set of optical parameter values is available. The interval identified by 1 is the m…	Integer32 Constraints: range: 1-96	.1.3.6.1.4.1.3607.2.30.2.2.1.4
cOpticalPMIntervalMaxParam This object gives the maximum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.2.1.5
cOpticalPMIntervalMinParam This object gives the minimum value measured for the optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.2.1.6
cOpticalPMIntervalMeanParam This object gives the average value of the measured optical parameter, in a particular 15 minute or 24 hour interval.	OpticalParameterValue Type Constraints: range: -1000000..1000000	.1.3.6.1.4.1.3607.2.30.2.2.1.7
cOpticalPMIntervalValidData This variable indicates if the data for this interval is valid.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.3607.2.30.2.2.1.8