CERENT-OPTICAL-MONITOR-MIB
This MIB module defines objects to monitor optical
characteristics and set corresponding thresholds, on the
optical interfaces in a network element.
This module is an adaptation of CISCO-OPTICAL-MONITOR-MIB.
- Source file
CERENT-OPTICAL-MONITOR-MIB- Last revised
- Identity
cerentOpticalMonitorMIB- Base OID
1.3.6.1.4.1.3607.1.10.70
Imported Objects
| CERENT-GLOBAL-REGISTRY | cerentGeneric cerentModules cerentRequirements |
| CERENT-TC | CerentPeriod |
| IF-MIB | ifIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE (no object page) OBJECT-GROUP (no object page) |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY (no object page) OBJECT-TYPE (no object page) |
| SNMPv2-TC | TEXTUAL-CONVENTION (no object page) TruthValue |
Net-SNMP examples using the cisco MIB directory Show commands
These commands use the standard Observium installation path and load the selected MIB variant before the RFC and Net-SNMP directories.
Translate the module identity
/usr/bin/snmptranslate -Pud -Ir -On -m 'CERENT-OPTICAL-MONITOR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'CERENT-OPTICAL-MONITOR-MIB::cerentOpticalMonitorMIB'
Walk the MIB subtree
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CERENT-OPTICAL-MONITOR-MIB' -M '/opt/observium/mibs/cisco:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CERENT-OPTICAL-MONITOR-MIB::cerentOpticalMonitorMIB'
Objects (38)
Showing 38 of 38 objects
Object legend
Table
Row
Column
Scalar
Node
Object type
Icons distinguish tables, entry rows, columns, scalars, and structural nodes.
SNMPv2-TCTruthValue
Syntax
Blue badges identify the value syntax. Connected badges read as defining module and convention.
IF-MIBifIndex
Table index
Green identifies an index object; yellow names its module when the index is defined elsewhere.
r/w
deprecated
obsolete
Access and status
r/w means read-write. Grey labels mark definitions retained for compatibility.
OBS ✓
Observium use
The indicator appears only when Observium directly references that object.
ifOperStatus
.1.3.6.1.2.1…
Names and OIDs
Object names link to their detail pages. Hover or focus a linked name or badge for available definition details.
.1.3.6.1.4.1.3607.1.10.70 |
||
.1.3.6.1.4.1.3607.2.30 |
||
.1.3.6.1.4.1.3607.2.30.1 |
||
.1.3.6.1.4.1.3607.2.30.1.1 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.1 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.10 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.11 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.2 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.3 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.4 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.5 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.6 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.7 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.8 |
||
.1.3.6.1.4.1.3607.2.30.1.1.1.9 |
||
.1.3.6.1.4.1.3607.2.30.2 |
||
.1.3.6.1.4.1.3607.2.30.2.1 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.1 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.2 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.3 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.4 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.5 |
||
.1.3.6.1.4.1.3607.2.30.2.1.1.6 |
||
.1.3.6.1.4.1.3607.2.30.2.2 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.1 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.2 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.3 |
||
|
Integer32
|
.1.3.6.1.4.1.3607.2.30.2.2.1.4 |
|
.1.3.6.1.4.1.3607.2.30.2.2.1.5 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.6 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.7 |
||
.1.3.6.1.4.1.3607.2.30.2.2.1.8 |
||
.1.3.6.1.4.1.3607.5.20 |
||
.1.3.6.1.4.1.3607.5.20.1 |
||
.1.3.6.1.4.1.3607.5.20.2 |
Dependencies (8) 6 direct · 2 transitive Show tree and compile order Hide dependency details
Each imported module is resolved in the importing module's source directory first, then through the normal default-variant rules.
Dependency tree
Dependency-first compile order
- SNMPv2-SMIrfc
- CERENT-GLOBAL-REGISTRYcisco
- SNMPv2-CONFrfc
- SNMPv2-TCrfc
- CERENT-TCcisco
- IANAifType-MIBrfc
- SNMPv2-MIBrfc
- IF-MIBrfc
- CERENT-OPTICAL-MONITOR-MIBciscoselected
Type Definitions (3)
| Enumeration |
receive(1)transmit(2)notApplicable(3) |
|
| Enumeration |
power(1)acPower(2)apdTemp(3)laserTemp(4)biasCurrent(5)peltierCurrent(6)xcvrVoltage(7)voa(8)gain(9)oscPower(10)addPower(11) |
|
| Integer32 |
range: -1000000..1000000 |
Conformance Groups (4)
Compliance Statements (1)
OID
.1.3.6.1.4.1.3607.5.20.1.1The compliance statement for network elements that
monitor optical characteristics and set thresholds on the
optical interfaces in a network element.
monitor optical characteristics and set thresholds on the
optical interfaces in a network element.
Required groups
| mandatory | cerentOpticalMIBMonGroup | |
| optional | cerentOpticalMIBThresholdGroup |
This group is required for network elements that support thresholds on optical parameters. |
| optional | cerentOpticalMIBPMGroup |
This group is required for network elements that support collection of optical performance monitoring data for 15 minute or 24 hour intervals. |
Object refinements
| Object | Access | Syntax | Description |
|---|---|---|---|
| cOpticalParamHighAlarmThresh | readonly | Write access is not required. | |
| cOpticalParamHighWarning15MinThresh | readonly | Write access is not required. | |
| cOpticalParamHighWarning1DayThresh | readonly | Write access is not required. | |
| cOpticalParamLowAlarmThresh | readonly | Write access is not required. | |
| cOpticalParamLowWarning15MinThresh | readonly | Write access is not required. | |
| cOpticalParamLowWarning1DayThresh | readonly | Write access is not required. |