CENTILLION-VLAN-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
1
Rows
1
Columns
8

cnVlanPortMemberTable

table mandatory
.1.3.6.1.4.1.930.2.1.2.31.2.1 · 1 row entry · 8 columns
Uses the nortel variant from /opt/observium/mibs/nortel.
Command help
Walk cnVlanPortMemberTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CENTILLION-VLAN-MIB' -M '/opt/observium/mibs/nortel:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CENTILLION-VLAN-MIB::cnVlanPortMemberTable'
The VLAN port membership configuration table. This 
table contains membership information pertaining to the
ports belonging to a VLAN.
cnVlanPortMemberEntry row .1.3.6.1.4.1.930.2.1.2.31.2.1.1
An entry containing VLAN membership information
for a particular port. Entries are added by
specifying the cnVlanPortMemberCard,
cnVlanPortMemberPort, cnVlanPortMemberVID,
and the cnVlanPortMemberIngressType.
Ent…
Column Syntax OID
The card number for this port in the VLAN.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.1
The port number for this port in the VLAN.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.2
The VLAN ID of which this port is a member.
CENTILLION-MCAST-MIBVlanId
Type Constraints:
range: 1..4095
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.3
The current status of the entry. Entries may be added by
specifying a value of createAndGo, and removed by setting
the status to destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.4
The method used to classify ingress frames on this
port into this VLAN. The allowed values are specific to
the cnVlanType of the VLAN as follows:
byPort: pvid or tag
byProtocolId: pvid, tag, or protoc…
Enumerationr/w
Enumerated Values:
1pvid
2tag
3protocolId
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.5
The value for this object indicates whether the
switch learned this port's VLAN membership dynamically.
SNMPv2-TCTruthValue
Type Values:
1true
2false
Description:
Represents a boolean value.
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.6
The value for this object identifies the instance of
the ifIndex object, defined in MIB-II, for the interface
corresponding to this port and VLAN. If no such entry
exists, the value 0 may be returned.
IF-MIBInterfaceIndex
Type Constraints:
range: 1..2147483647
Description:
A unique value, greater than zero, for each interface or
interface sub-layer in the managed system. It is
recommended that values are assigned contiguously starting
from 1. The value for each interface sub-layer must …
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.7
The ring number for this port if this VLAN uses source
route or source route transparent bridging.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.930.2.1.2.31.2.1.1.8