CAT2600-MIB Table View

A table of managers to which to send traps.
Entries in the table are saved across resets and
power cycles.

cat2600TsTrapRcvrEntry row .1.3.6.1.4.1.9.1.111.1.2.1.1.14.1

Definition of rows in the trap receiver table.
The column cat2600TsTrapRcvrStatus is used to create
and delete rows in the table. Creation requires
a SET PDU with objects cat2600TsTrapRcvrStatus,
cat2600TsTrapRcvrIpAdd…

Indexes

cat2600TsTrapRcvrIndex

Column	Syntax	OID
cat2600TsTrapRcvrIndexmandatory The index of the row in the table.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.1
cat2600TsTrapRcvrStatusmandatory Setting the value of this object to invalid(3) deletes the row from the table. The value invalid(3) should never be returned on a GET. Setting this value to create(4) causes a new row to be created if th…	Enumerationr/w Enumerated Values: 1 other 2 valid 3 invalid 4 create	.1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.2
cat2600TsTrapRcvrIpAddressmandatory IP address for an SNMP manager that is to receive the trap.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.3
cat2600TsTrapRcvrCommmandatory Community string to use.	OctetStringr/w Constraints: range: 0-32	.1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.4
cat2600TsTrapRcvrDmnsmandatory Domains on which traps to this target are sent. Each octet within the value of this object specifies a set of eight domains, with the first octet specifying domains 0 through 7, the second octet specifying domains 8 thr…	OctetStringr/w Constraints: range: 8-8	.1.3.6.1.4.1.9.1.111.1.2.1.1.14.1.5

A table of information about each port.  The number of rows
is given by cat2600TsNumPorts.
          
(This value refers to PHYSICAL ports as opposed to internal
logical CRF bridge ports.)

cat2600TsPortEntry row .1.3.6.1.4.1.9.1.111.1.2.2.1.1

Definition of rows in the port table. The number
of rows is determined by the hardware and is
specified by the value of cat2600TsNumPorts. Rows can
not be created or deleted via SNMP requests.

Indexes

cat2600TsPortIndex

Column	Syntax	OID
cat2600TsPortIndexmandatory The ifIndex value corresponding to each port entry. For TR interfaces, the TsPortIndex corresponds to the Port Number or POE Index.	Integer32 Constraints: range: 1-65535	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.1
cat2600TsPortRcvLocalFramesmandatory Number of frames received where the destination is on this port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.2
cat2600TsPortForwardedFramesmandatory Number of frames received on this port and forwarded to another port or the system module for processing.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.3
cat2600TsPortMostStationsmandatory Highest number of stations ever active at any time since the last reset of the switch as seen by this port. This includes the default MAC address entries for the port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.4
cat2600TsPortMaxStationsmandatory Maximum number of stations which the port can support simultaneously.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.5
cat2600TsPortSWHandledFramesmandatory Number of Frames received on this port and delivered to the system module for processing.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.6
cat2600TsPortLocalStationsmandatory Number of stations on this port's address table which belong to the segment attached to this port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.7
cat2600TsPortRemoteStationsmandatory Number of stations on this port's address table which belong to segments attached to other ports.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.8
cat2600TsPortUnknownStaFramesmandatory Number of unicast frames received on this port and forwarded to the system module for processing because the source or destination station address is not in the port's forwarding table.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.9
cat2600TsPortResetStatsmandatory Setting this object to reset(3) causes all traffic counters for this port to be set to zero. Also the value of cat2600TsPortResetTimer is set to zero.	Enumerationr/w Enumerated Values: 1 other 2 running 3 reset	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.10
cat2600TsPortResetTimermandatory Time (in 100th second ticks) since the port counters were reset.	RFC1155-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.11
cat2600TsPortResetAddrsmandatory Setting this object to reset(3) clears all address table entries for this port as well as setting all port traffic counters to zero and setting cat2600TsPortResetTimer to zero.	Enumerationr/w Enumerated Values: 1 other 2 running 3 reset	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.12
cat2600TsPortRcvBcastsmandatory Number of Broadcast Frames received on this port without errors.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.13
cat2600TsPortSwitchedFramesmandatory Number of frames switched on this port	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.14
cat2600TsPortLinkStatemandatory Link state of the port.	Enumeration Enumerated Values: 1 up 2 down	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.15
cat2600TsPortHashOverflowsmandatory Number of times a hash bucket was full when trying to add an entry to the port address table.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.16
cat2600TsPortAddrAgingTimemandatory Port level address aging time.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.17
cat2600TsPortSwitchModemandatory Operational frame switching mode for the port. When in auto mode the port uses the Direct Cut algorithm to place the port in either cut-thru or store-and- forward mode. This object is equivalent to cPortProtocolCharFram…	Enumerationr/w Enumerated Values: 1 storeandforward 2 cutthru 3 auto	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.18
cat2600TsPortFixedCfgmandatory Use fixed configuration or run auto detection to determine configuration.	Enumerationr/w Enumerated Values: 1 auto-detect 2 fixed	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.19
cat2600TsPortModemandatory When read, this object indicates the Port Mode obtained by the auto-detect function. It is a valid read object only when TsPortFixedCfg is set to auto-detect(1) and TsPortLinkState indicates up(1). Write…	Enumerationr/w Enumerated Values: 1 adapter 2 port	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.20
cat2600TsPortDuplexmandatory Version 1 MIB When read, this object indicates the Port Duplex state obtained by the auto-detect function. This object is a valid read object any time that TSPortLinkState indicates up(1) or when TsPortFi…	Enumerationr/w Enumerated Values: 1 half-duplex 2 full-duplex	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.21
cat2600TsPortCfgLossmandatory Number of events as described in TsPortCfgLossRC after the port has completed the join process and then lost communication.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.22
cat2600TsPortCfgLossRCmandatory Reason code describing the cause of configuration loss.	Enumeration Enumerated Values: 1 wire-fault 2 beacon-auto-removal 3 force-remove-macaddr 4 connection-lost 5 adapter-check 6 close-srb 7 fdx-protocol-failure	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.23
cat2600TsPortCRCCountmandatory Number of frames received with CRC error. This object is equivalent to dot5StatsLineError and to the dtrMac MIB object txiStatsLineErrorCounter.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.24
cat2600TsPortHPChannelFramesmandatory Number of frames sent to the high priority channel of the particular Token-Ring port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.25
cat2600TsPortLPChannelFramesmandatory Number of frames sent to the low priority channel of the particular Token-Ring port.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.26
cat2600TsPortHPThresholdmandatory Priority level at which frames are sent to the High priority channel.	Integer32 Constraints: range: 0-6	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.27
cat2600TsPortCfgRingSpeedmandatory When read this object indicates the Port Ring Speed obtained by the RSA function. Write to this object when defining the Port Ring Speed for a fixed configuration (TsPortCfgRSA set to fixed(2)). …	Enumerationr/w Enumerated Values: 1 speed-16megabit 2 speed-4megabit	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.28
cat2600TsPortCfgRSAmandatory User configured Ring Speed Adjust or fixed speed.	Enumerationr/w Enumerated Values: 1 rsa 2 fixed	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.29
cat2600TsPortDomainmandatory Domain that the port belongs to.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.30
cat2600TsPortCfgLossThresholdmandatory Number of configuration loss events (described in TsPortCfgLossRC) during the sample period which, if exceeded, should cause the port to be disabled. If the port is disabled by this function the port must be manually re…	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.31
cat2600TsPortCfgLossSamplingPeriodmandatory The sampling period, in minutes, for which the port monitors to see if the configuration loss threshold has been exceeeded.	Integer32r/w Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.32
cat2600TsPortBeaconStationAddressmandatory MAC address of the Station last generating a beacon MAC frame. This information is present for the generation of a trap and should not be used to represent the health of the ring.	MacAddr Type Constraints: range: 6	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.33
cat2600TsPortBeaconNAUNmandatory MAC address of the NAUN station last generating a beacon MAC frame. This information is present for the generation of a trap and should not be used to represent the health of the ring.	MacAddr Type Constraints: range: 6	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.34
cat2600TsPortBeaconTypemandatory The type of Beacon which last occurred. Values are the same as for the Beacon Type subvector and are defined as follows: X'0001' Issued by a Dual Ring Station during reconfiguration X'0002' Signal Loss …	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.1.1.35

A table of station addresses known at an
individual port.  This table is designed to reduce
the number of SNMP GETNEXT requests.  This is done
by packing many values into an octet string.  (The
maximum size frame should be used to return the
result.) The instance returned for a GETNEXT is
the value that identifies the last 'row' in the
octet string.  When the table is completely
retrieved with one or more GETNEXTs, duplicate
entries may be present, and entries may be skipped
if the table is changing while being retrieved.

cat2600TsOptPortStaEntry row .1.3.6.1.4.1.9.1.111.1.2.2.2.1

Definition of the rows in the optimized port
station address table. Rows can not be created or
deleted via SNMP requests.

Indexes

cat2600TsPortIndex cat2600TsOptPortStaPos

Column	Syntax	OID
cat2600TsOptPortStaPosmandatory Second index for items in the optimized port station address table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.1.111.1.2.2.2.1.1
cat2600TsOptPortStaValmandatory An OCTET STRING containing a multiple number of stations from a port station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Location 1 - local 2 - remote - 1 octet …	OctetString	.1.3.6.1.4.1.9.1.111.1.2.2.2.1.2

Port station table.

cat2600TsPortStnEntry row .1.3.6.1.4.1.9.1.111.1.2.2.3.1

Definition of rows in the port table. The number
of rows is determined by the hardware and is
specified by the value of cat2600TsNumPorts. Rows can
not be created or deleted via SNMP requests.

Indexes

cat2600TsPortStnPortNum cat2600TsPortStnAddress

Column	Syntax	OID
cat2600TsPortStnPortNummandatory Port number corresponding to this entry.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.1
cat2600TsPortStnAddressmandatory Station MAC address. Equivalent to ifPhysAddr for this port.	MacAddr Type Constraints: range: 6	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.2
cat2600TsPortStnLocationmandatory Where the station is located.	Enumeration Enumerated Values: 1 local 2 remote	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.3
cat2600TsPortStnSrcFramesmandatory Number of frames with this station as the source.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.4
cat2600TsPortStnSrcBytesmandatory Number of Bytes with this station as the source.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.5
cat2600TsPortStnDestnFramesmandatory Number of frames with this station as the destination.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.6
cat2600TsPortStnDestnBytesmandatory Number of bytes with this station as the destination.	RFC1155-SMICounter Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.9.1.111.1.2.2.3.1.7

Currently active domains on the switch.

cat2600TsDmnEntry row .1.3.6.1.4.1.9.1.111.1.2.3.1.1

Definition of each row in the domain Table

Indexes

cat2600TsDmnIndex

Column	Syntax	OID
cat2600TsDmnIndexmandatory Domain number for each row.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.1
cat2600TsDmnPortsmandatory The set of ports that belong to this Domain. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, …	OctetStringr/w	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.2
cat2600TsDmnIpStatemandatory IP configuration method for this domain.	Enumerationr/w Enumerated Values: 1 disabled 2 auto-bootp 3 always-bootp	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.3
cat2600TsDmnIpAddressmandatory The IP Address of this Domain. Changes to this object will take effect immediately.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.4
cat2600TsDmnIpSubnetMaskmandatory The subnet mask for this domain. Changes to this object will take effect immediately.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.5
cat2600TsDmnIpDefaultGatewaymandatory The IP Address of the default gateway for this Domain. Changes to this object will take effect immediately.	RFC1155-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.6
cat2600TsDmnStpmandatory Turn Spanning tree on or off. Changes to this object will take effect immediately. The Spanning Tree Objects themselves are in the dtrConc MIB.	Enumerationr/w Enumerated Values: 1 on 2 off	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.7
cat2600TsDmnNamemandatory User assigned name for each domain.	OctetStringr/w Constraints: range: 0-48	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.8
cat2600TsDmnIfIndexmandatory The ifIndex of the interface entry corresponding to each configured domain.	Integer32 Constraints: range: 1-100	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.9
cat2600TsDmnBaseBridgeAddrmandatory Base MAC address of this domain. Internally equivalent to dtrCRFMacAddress and to ifPhysAddress of the 'Domain' port.	MacAddr Type Constraints: range: 6	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.10
cat2600TsDmnNumStationsmandatory Aggregate number of currently active stations (nodes) on all ports in the domain.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.11
cat2600TsDmnMostStationsmandatory Highest aggregate number of stations ever active on all ports at one time, since the last reset or power cycle.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.3.1.1.12

Stations seen in each domain.

cat2600TsDmnStationEntry row .1.3.6.1.4.1.9.1.111.1.2.3.5.1

Definition of each row in the domain specific station table.
The object is equivalent to dtrFdbDynamicAddrTable or
dtrFdbStaticAddrTable depending if the entry is learned
or is a configured filter.

Indexes

cat2600TsDmnIndex cat2600TsDmnStationAddress

Column	Syntax	OID
cat2600TsDmnStationDmnIndexmandatory Integer reference to the domain number in the domain table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.1.111.1.2.3.5.1.1
cat2600TsDmnStationAddressmandatory The Station's MAC address.	OctetString Constraints: range: 6-6	.1.3.6.1.4.1.9.1.111.1.2.3.5.1.2
cat2600TsDmnStationPortmandatory The source port for the Station. The dtrConc MIB equivalents are dtrFdbDynamicAddrPortNumber and dtrFdbStaticAddrPortNumber.	Integer32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.9.1.111.1.2.3.5.1.3
cat2600TsDmnStationTrafficmandatory A bit string that identifies the ports that this station has generated traffic to or from. The bits correspond to ports, with bits and ports numbered from right to left so that bit 0 represents the CPU, bit 1 represent…	OctetString	.1.3.6.1.4.1.9.1.111.1.2.3.5.1.4

A table of station addresses known at an
individual port.  This table is designed to reduce
the number of SNMP GETNEXT requests.  This is done
by packing many values into an octet string.  (The
maximum size frame should be used to return the
result.) The instance returned for a GETNEXT is
the value that identifies the last 'row' in the
octet string.  When the table is completely
retrieved with one or more GETNEXTs, duplicate
entries may be present, and entries may be skipped
if the table is changing while being retrieved.

cat2600TsOptDmnStaEntry row .1.3.6.1.4.1.9.1.111.1.2.3.6.1

Definition of the rows in the optimized domain
station address table. Rows can not be created or
deleted via SNMP requests.

Indexes

cat2600TsDmnStationDmnIndex cat2600TsOptDmnStaPos

Column	Syntax	OID
cat2600TsOptDmnStaPosmandatory Second index for items in the optimized port station address table.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.1.111.1.2.3.6.1.1
cat2600TsOptDmnStaValmandatory An OCTET STRING containing a multiple number of stations from the domain station address table. Each entry is encoded in the following format: Station MAC address - 6 octets Port of Entry - 1 octet Traffic Mask …	OctetString	.1.3.6.1.4.1.9.1.111.1.2.3.6.1.2

The TokenPipe table.

cat2600TsPipeEntry row .1.3.6.1.4.1.9.1.111.1.2.4.1.1

Definition of each row in the TokenPipe table.

Indexes

cat2600TsPipeNumber

Column	Syntax	OID
cat2600TsPipeNumbermandatory The TokenPipe number for this row.	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.9.1.111.1.2.4.1.1.1
cat2600TsPipePortsmandatory The set of ports in this switch which are active in this Pipe. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying po…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.9.1.111.1.2.4.1.1.2

Filters set up in the switch.

cat2600TsFilterEntry row .1.3.6.1.4.1.9.1.111.1.2.5.1.1

Definition of each row in the filter table.

Indexes

cat2600TsFilterStationAddress cat2600TsFilterType

Column	Syntax	OID
cat2600TsFilterStationAddressmandatory The MAC address in a frame to which this entry's filtering information applies.	MacAddr Type Constraints: range: 6	.1.3.6.1.4.1.9.1.111.1.2.5.1.1.1
cat2600TsFilterTypemandatory There are two types of filters (i) source filters which act on the source address portion of a packet and (ii) destination filters which act on the destination address portion of a packet.	Enumeration Enumerated Values: 1 source-filter 2 destination-filter	.1.3.6.1.4.1.9.1.111.1.2.5.1.1.2
cat2600TsFilterStatusmandatory This object indicates the status of this entry. valid(1) - this entry is currently in use and will remain so after the next reset of the bridge. invalid(2) - writing this value to the object …	Enumerationr/w Enumerated Values: 1 valid 2 invalid	.1.3.6.1.4.1.9.1.111.1.2.5.1.1.3
cat2600TsFilterPortsmandatory The set of ports to which this filter is applied. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through…	OctetStringr/w	.1.3.6.1.4.1.9.1.111.1.2.5.1.1.4
cat2600TsFilterMaskmandatory The filter mask for this station. The semantics of the filter mask depend on the type of filter. For a source filter, the mask gives the ports that are allowed to receive frames from the filtered address. For a destinat…	OctetStringr/w Constraints: range: 4-4	.1.3.6.1.4.1.9.1.111.1.2.5.1.1.5

A table of the installed UFC cards in the switch.  The number
of entries in the table is given by cat2600TsNumberofUFCs.

cat2600TsUFCEntry row .1.3.6.1.4.1.9.1.111.1.2.6.1.1

The objects contained in the UFC table.

Indexes

cat2600TsUFCSlotNum

Column	Syntax	OID
cat2600TsUFCSlotNummandatory The number of the slot in which the UFC is installed.	Integer32 Constraints: range: 1-32	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.1
cat2600TsUFCNumPhysIfsmandatory The total number of physical network interfaces on the UFC. This count does not include the interface _OF_ the card or any logical interfaces which be _ON_ the card.	Integer32 Constraints: range: 0-65535	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.2
cat2600TsUFCManufacturermandatory Firmware manufacturer.	OctetString Constraints: range: 16-16	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.3
cat2600TsUFCTypemandatory The code representing what type of UFC is present. UFC codes are assigned by Cisco.	OctetString Constraints: range: 2-2	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.4
cat2600TsUFCTypeDescmandatory A text string describing what type of UFC is present.	OctetString Constraints: range: 0-127	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.5
cat2600TsUFCHwVermandatory The hardware version in the form major.minor.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.6
cat2600TsUFCFwVermandatory The firmware version in the form major.minor.	OctetString Constraints: range: 0-64	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.7
cat2600TsUFCStatusmandatory The operational status of the UFC.	Enumeration Enumerated Values: 1 up 2 down 3 other	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.8
cat2600TsUFCResetmandatory The object is used to reset a UFC. Writing a softReset(3) causes the switch to reset the hardware, run the minimum number of diagnostics, and clear all counters. Writing hardReset(2) causes the UFC to run power up diagn…	Enumerationr/w Enumerated Values: 1 running 2 hardReset 3 softReset	.1.3.6.1.4.1.9.1.111.1.2.6.1.1.9