CASA-CABLE-CMQUERY-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
8

casaCmQueryTable

table
.1.3.6.1.4.1.20858.10.18.1.1 · 1 row entry · 8 columns
Open in standard view
Uses the casa variant from /opt/observium/mibs/casa.
Command help
Walk casaCmQueryTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CASA-CABLE-CMQUERY-MIB' -M '/opt/observium/mibs/casa:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CASA-CABLE-CMQUERY-MIB::casaCmQueryTable' 
describes the PHY signal quality and Tx/Rx parameter of cable modem.
casaCmQueryEntry row .1.3.6.1.4.1.20858.10.18.1.1.1
describes the PHY signal quality and Tx/Rx parameter of cable modem,index of this table is casaQueryCmMacAddress.
Indexes
Column Syntax OID
casaQueryCmMacAddress
The cable modem Mac Address.
SNMPv2-TCMacAddress
Type Constraints:
range: 6
Description:
Represents an 802 MAC address represented in the
`canonical' order defined by IEEE 802.1a, i.e., as if it
were transmitted least significant bit first, even though
802.5 (in contrast to other 802.x protocols) requires M…
 .1.3.6.1.4.1.20858.10.18.1.1.1.1
casaQueryCmIpAddress
The cable modem Ip Address.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.20858.10.18.1.1.1.2
casaQueryCmTxTimeOffset
A measure of the current round trip time at the CM, or the
maximum round trip time seen by the CMTS. Used for timing
of CM upstream transmissions to ensure synchronized
arrivals at the CMTS. Units are in terms of…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20858.10.18.1.1.1.3
casaQueryCmMicroReflection
Total microreflections including in-channel response
as perceived on this interface, measured in dBc below
the signal level.
This object is not assumed to return an absolutely
accurate value, but should give a rough ind…
dBcInteger32
Constraints:
range: 0-255
 .1.3.6.1.4.1.20858.10.18.1.1.1.4
casaQueryCmStatusTxPower
The operational transmit power of the cable modem downstream channel,the most current value (CM)
or the value of 0.
dBmVTenthdBmV .1.3.6.1.4.1.20858.10.18.1.1.1.5
casaQueryCmStatusRxPower
The operational receive power of the cable modem upstream channel,the most current value (CM)
or the value of 0
dBmVTenthdBmV .1.3.6.1.4.1.20858.10.18.1.1.1.6
casaQueryCmSigQSignalNoise
Signal/Noise ratio as perceived for this channel.
describes the Signal/Noise of the upstream
channel of CM .
dBTenthdB .1.3.6.1.4.1.20858.10.18.1.1.1.7
casaQueryCmtsSigQSignalNoise
Signal/Noise ratio as perceived for this channel.
describes the average Signal/Noiseof the upstream
channel of CMTS.
dBTenthdB .1.3.6.1.4.1.20858.10.18.1.1.1.8