CASA-802-TAP-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
1
Rows
1
Columns
10

casa802tapStreamTable

table
.1.3.6.1.4.1.20858.10.19.1.1.2 · 1 row entry · 10 columns
Open in standard view 
The Intercept Stream 802 Table lists the IEEE 802 data streams
to be intercepted.  The same data stream may be required by
multiple taps, and one might assume that often the intercepted
stream is a small subset of the traffic that could be
intercepted.
          
This essentially provides options for packet selection, only
some of which might be used. For example, if all traffic to or
from a given interface is to be intercepted, one would
configure an entry which lists the interface, and wild-card
everything else.  If all traffic to or from a given MAC Address
is to be intercepted, one would configure two such entries
listing the MAC Address as source and destination respectively,
and wild-card everything else.
          
The first index indicates which Mediation Device the
intercepted traffic will be diverted to. The second index
permits multiple classifiers to be used together, such as
having a MAC address as source or destination.
          
Entries are added to this table via c802tapStreamStatus in 
accordance with the RowStatus convention.
casa802tapStreamEntry entry .1.3.6.1.4.1.20858.10.19.1.1.2.1
A stream entry indicates a single data stream to be
intercepted to a Mediation Device. Many selected data
streams may go to the same application interface, and many
application interfaces are supported.
Indexes
No indexes recorded
Column Syntax OID
casa802tapStreamIndex
The index of the stream itself.
Integer32 .1.3.6.1.4.1.20858.10.19.1.1.2.1.1
casa802tapStreamFields
This object displays what attributes must be tested to
identify traffic which requires interception. The packet
matches if all flagged fields match.

interface: indicates that traffic on the …
Bitsr/w .1.3.6.1.4.1.20858.10.19.1.1.2.1.2
casa802tapStreamInterface
The ifIndex value of the interface over which traffic to be
intercepted is received or transmitted. The interface may be
physical or virtual. If this is the only parameter specified,
and it is other than -1 or 0, all tr…
Integer32r/w .1.3.6.1.4.1.20858.10.19.1.1.2.1.3
casa802tapStreamDestinationAddress
The Destination address used in packet selection.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.4
casa802tapStreamSourceAddress
The Source Address used in packet selection.
SNMPv2-TCMacAddressr/w
Textual Convention: SNMPv2-TCMacAddress OctetString
Type Constraints:
range: 6
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.5
casa802tapStreamEthernetPid
The value of the Ethernet Protocol Identifier, which may be
found on Ethernet traffic or IEEE 802.2 SNAP traffic.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.6
casa802tapStreamDestinationLlcSap
The value of the IEEE 802.2 Destination SAP.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.7
casa802tapStreamSourceLlcSap
The value of the IEEE 802.2 Source SAP.
SNMPv2-SMIUnsigned32r/w
Textual Convention: SNMPv2-SMIUnsigned32 Unsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.8
casa802tapStreamInterceptEnable
When the value is up, this table is valid, otherwise this table is invalid.
Enumerationr/w .1.3.6.1.4.1.20858.10.19.1.1.2.1.9
casa802tapStreamStatus
The status of this conceptual row. This object manages
creation, modification, and deletion of rows in this table.
When any rows must be changed, casa802tapStreamStatus must
be first set to 'notInService'.
SNMPv2-TCRowStatusr/w
Textual Convention: SNMPv2-TCRowStatus Enumeration
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
 .1.3.6.1.4.1.20858.10.19.1.1.2.1.10