CAPWAP-BASE-MIB Table View

A table of objects that configure the AC name list.
Values of all read-create objects in this table are
persistent at restart/reboot.

capwapBaseAcNameListEntry row .1.3.6.1.2.1.196.1.1.9.1

A set of objects that configures the AC name list.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseAcNameListId Represents the unique identifier of an AC Name list.	Unsigned32	.1.3.6.1.2.1.196.1.1.9.1.1
capwapBaseAcNameListName Represents the name of an AC, and it is expected to be an UTF-8 encoded string.	OctetStringr/w	.1.3.6.1.2.1.196.1.1.9.1.2
capwapBaseAcNameListPriority Represents the priority order of the preferred AC. For instance, the value of one (1) is used to set the primary AC, the value of two (2) is used to set the secondary AC, etc.	Unsigned32r/w	.1.3.6.1.2.1.196.1.1.9.1.3
capwapBaseAcNameListRowStatus This object is used to create, modify, and/or delete a row in this table. The value of capwapBaseAcNameListName and capwapBaseAcNameListPriority can be changed when this object is in state 'active' or in 'notInService'.…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.196.1.1.9.1.4

A table of objects that configure station Access Control
Lists (ACLs).
The WTP will not provide service to the MAC addresses
configured in this table.
Values of all read-create objects in this table are persistent
at AC restart/reboot.

capwapBaseMacAclEntry row .1.3.6.1.2.1.196.1.1.10.1

A set of objects that configures station Access Control
Lists (ACLs).

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseMacAclId Represents the unique identifier of an ACL.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.1.10.1.1
capwapBaseMacAclStationId Represents the MAC address of a station to which WTPs will no longer provides service.	CapwapBaseStationIdTCr/w Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.1.10.1.2
capwapBaseMacAclRowStatus This object is used to create, modify, and/or delete a row in this table. The value of capwapBaseMacAclStationId can be changed when this object is in state 'active' or in 'notInService'. The capwapBaseMacAclRowStatus m…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.196.1.1.10.1.3

A table of objects that configure WTP profiles for WTPs to
be managed before they connect to the AC.
An operator could change a WTP's configuration by changing
the values of parameters in the corresponding WTP profile,
then the WTP could get the new configuration through the
CAPWAP control channel.
          
Values of all read-create objects in this table are
persistent at restart/reboot.

capwapBaseWtpProfileEntry row .1.3.6.1.2.1.196.1.2.1.1

A set of objects that configures and displays a WTP profile.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseWtpProfileId Represents the unique identifier of a WTP profile.	CapwapBaseWtpProfileIdTC Type Constraints: range: 0..4096	.1.3.6.1.2.1.196.1.2.1.1.1
capwapBaseWtpProfileName Represents the name of a WTP profile.	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.196.1.2.1.1.2
capwapBaseWtpProfileWtpMacAddress Represents the Base MAC address of a WTP. A WTP profile MUST contain the Base MAC address of the WTP because the CAPWAP message received from the WTP contains its Base MAC address and the AC uses the Base MAC address to…	CapwapBaseWtpIdTCr/w Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.2.1.1.3
capwapBaseWtpProfileWtpModelNumber Represents the model number of a WTP. A WTP profile MUST include the WTP's model number, which reflects the number of Physical Layer (PHY) radios on the WTP. In this way, the creation of a WTP profile triggers the AC to…	SNMP-FRAMEWORK-MIBSnmpAdminStringr/w Type Constraints: range: 0..255	.1.3.6.1.2.1.196.1.2.1.1.4
capwapBaseWtpProfileWtpName Represents the name of the WTP.	OctetStringr/w	.1.3.6.1.2.1.196.1.2.1.1.5
capwapBaseWtpProfileWtpLocation Represents the location of the WTP.	OctetStringr/w	.1.3.6.1.2.1.196.1.2.1.1.6
capwapBaseWtpProfileWtpStaticIpEnable Represents whether the WTP SHOULD use a static IP address or not. A value of false disables the static IP address, while a value of true enables it.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.2.1.196.1.2.1.1.7
capwapBaseWtpProfileWtpStaticIpType Represents the static IP address type used by the WTP. Only ipv4(1) is supported by the object. Although the CAPWAP protocol [RFC5415] supports both IPv4 and IPv6, note that the CAPWAP field modeled by this object does …	Enumerationr/w	.1.3.6.1.2.1.196.1.2.1.1.8
capwapBaseWtpProfileWtpStaticIpAddress When capwapBaseWtpProfileWtpStaticIpEnable is true, it represents the static IP address to be assigned to the WTP. The format of this IP address is determined by the corresponding instance of object capwa…	OctetStringr/w	.1.3.6.1.2.1.196.1.2.1.1.9
capwapBaseWtpProfileWtpNetmask When capwapBaseWtpProfileWtpStaticIpEnable is true, it represents the netmask to be assigned to the WTP. The format of this netmask is determined by the corresponding instance of object capwapBaseWtpProfileWtpStaticIpTy…	OctetStringr/w	.1.3.6.1.2.1.196.1.2.1.1.10
capwapBaseWtpProfileWtpGateway When capwapBaseWtpProfileWtpStaticIpEnable is true, it represents the gateway to be assigned to the WTP. The format of this IP address is determined by the corresponding instance of object capwapBaseWtpProfileWtpStaticI…	OctetStringr/w	.1.3.6.1.2.1.196.1.2.1.1.11
capwapBaseWtpProfileWtpFallbackEnable Represents whether to enable or disable automatic CAPWAP fallback in the event that a WTP detects its preferred AC and is not currently connected to it. The following enumerated values are supported: enabled(1) - The…	Enumerationr/w	.1.3.6.1.2.1.196.1.2.1.1.12
capwapBaseWtpProfileWtpEchoInterval Represents the minimum time, in seconds, between sending Echo Request messages to the AC that the WTP has joined.	secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.1.1.13
capwapBaseWtpProfileWtpIdleTimeout Represents the idle timeout value that the WTP SHOULD enforce for its active stations.	secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.1.1.14
capwapBaseWtpProfileWtpMaxDiscoveryInterval Represents the maximum time allowed between sending Discovery Request messages, in seconds.	secondUnsigned32r/w	.1.3.6.1.2.1.196.1.2.1.1.15
capwapBaseWtpProfileWtpReportInterval Represents the interval for WTP to send the Decryption Error report.	secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.1.1.16
capwapBaseWtpProfileWtpStatisticsTimer Represents the interval the WTP uses between the WTP Event Requests it transmits to the AC to communicate its statistics, in seconds.	secondSNMPv2-SMIUnsigned32r/w Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.1.1.17
capwapBaseWtpProfileWtpEcnSupport Represents the support for the Explicit Congestion Notification (ECN) bits, as defined in [RFC3168]. The following enumerated values are supported: limited(0) - Limited ECN support fullAndLimited(1) - Full an…	Enumerationr/w	.1.3.6.1.2.1.196.1.2.1.1.18
capwapBaseWtpProfileRowStatus This object is used to create, modify, and/or delete a row in this table. The value of capwapBaseWtpProfileName, capwapBaseWtpProfileWtpName and capwapBaseWtpProfileWtpLocation can be changed when this ob…	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.2.1.196.1.2.1.1.19

A table of objects that indicate the AC's CAPWAP FSM state
for each WTP, and helps the operator to query a WTP's
current configuration.

capwapBaseWtpStateEntry row .1.3.6.1.2.1.196.1.2.2.1

A set of objects that displays the AC's CAPWAP FSM state
for each WTP.
Also, the operator could query the current configuration
of a WTP by using the identifier of the corresponding
WTP profile.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseWtpStateWtpId Represents the unique identifier of a WTP.	CapwapBaseWtpIdTC Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.2.2.1.1
capwapBaseWtpStateWtpIpAddressType Represents the IP address type of a WTP. Only ipv4(1) and ipv6(2) are supported by the object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.196.1.2.2.1.2
capwapBaseWtpStateWtpIpAddress Represents the IP address of a WTP that corresponds to the IP address in the IP packet header. The format of this IP address is determined by the corresponding instance of object capwapBaseWtpStateWtpIpAd…	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.196.1.2.2.1.3
capwapBaseWtpStateWtpLocalIpAddressType Represents the local IP address type of a WTP. Only ipv4(1) and ipv6(2) are supported by the object.	INET-ADDRESS-MIBInetAddressType Type Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 16 dns 25 l2vpn	.1.3.6.1.2.1.196.1.2.2.1.4
capwapBaseWtpStateWtpLocalIpAddress Represents the local IP address of a WTP and models the CAPWAP Local IPv4 Address or CAPWAP Local IPv6 Address fields [RFC5415]. If a Network Address Translation (NAT) device is present between WTP and AC, the value of …	INET-ADDRESS-MIBInetAddress Type Constraints: range: 0..255	.1.3.6.1.2.1.196.1.2.2.1.5
capwapBaseWtpStateWtpBaseMacAddress Represents the WTP's Base MAC Address, which MAY be assigned to the primary Ethernet interface. The instance of the object corresponds to the Base MAC Address sub-element in the CAPWAP protocol [RFC5415].	OctetString	.1.3.6.1.2.1.196.1.2.2.1.6
capwapBaseWtpState Represents the various possibilities of the AC's CAPWAP FSM state for each WTP. The following enumerated values are supported: dtls(1) - DTLS negotiation states, which include DTLS setup, a…	Enumeration	.1.3.6.1.2.1.196.1.2.2.1.7
capwapBaseWtpStateWtpUpTime Represents the time (in hundredths of a second) since the WTP has been in the running state (corresponding to the value run(6) of capwapBaseWtpState).	SNMPv2-SMITimeTicks Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.2.1.8
capwapBaseWtpStateWtpCurrWtpProfileId Represents the current identifier of a WTP profile. The operator could query a WTP's current configuration with the identifier of a WTP profile.	CapwapBaseWtpProfileIdTC Type Constraints: range: 0..4096	.1.3.6.1.2.1.196.1.2.2.1.9

A table of objects that display properties of the WTPs
in running state.

capwapBaseWtpEntry row .1.3.6.1.2.1.196.1.2.3.1

A set of objects that displays properties of the WTPs
in running state.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseWtpCurrId Represents the unique identifier of a WTP in running state.	CapwapBaseWtpIdTC Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.2.3.1.1
capwapBaseWtpPhyIndex Represents the unique physical index of a physical entity in the ENTITY-MIB module [RFC4133]. Information about a specific WTP such as its software version could be accessed through this index.	ENTITY-MIBPhysicalIndex Type Constraints: range: 1..2147483647	.1.3.6.1.2.1.196.1.2.3.1.2
capwapBaseWtpBaseMacAddress Represents the WTP's Base MAC Address, which MAY be assigned to the primary Ethernet interface. The instance of the object corresponds to the Base MAC Address sub-element in the CAPWAP protocol [RFC5415].	OctetString	.1.3.6.1.2.1.196.1.2.3.1.3
capwapBaseWtpTunnelModeOptions Represents the tunneling modes of operation supported by the WTP.	CapwapBaseTunnelModeTC Type Values: 0 localBridging 1 dot3Tunnel 2 nativeTunnel	.1.3.6.1.2.1.196.1.2.3.1.4
capwapBaseWtpMacTypeOptions Represents the MAC mode of operation supported by the WTP.	CapwapBaseMacTypeTC Type Values: 0 localMAC 1 splitMAC 2 both	.1.3.6.1.2.1.196.1.2.3.1.5
capwapBaseWtpDiscoveryType Represents how the WTP discovers the AC. The following enumerated values are supported: unknown(0) - Unknown staticConfig(1) - Static configuration dhcp(2) - DHCP dns(3) - DNS acRef(4) …	Enumeration	.1.3.6.1.2.1.196.1.2.3.1.6
capwapBaseWtpRadiosInUseNum Represents the number of radios in use on the WTP.	Unsigned32	.1.3.6.1.2.1.196.1.2.3.1.7
capwapBaseWtpRadioNumLimit Represents the maximum radio number supported by the WTP.	Unsigned32	.1.3.6.1.2.1.196.1.2.3.1.8
capwapBaseWtpRetransmitCount Represents the number of retransmissions for a given CAPWAP packet.	retransmissionsSNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.3.1.9

A table of objects that display the mappings between
WTP Virtual Radio Interfaces and PHY radios, and the
wireless binding type for each PHY radio.
As capwapBaseWirelessBindingTable stores the mappings between
PHY radios (Radio IDs) and the ifIndexes of WTP Virtual Radio
Interfaces, the operator can get the ifIndex information by
querying this table.  Such a query operation SHOULD run from
radio ID 1 to radio ID 31 according to [RFC5415],
and stop when an invalid ifIndex value (0) is returned.
Values of all objects in this table are persistent at
restart/reboot.

capwapBaseWirelessBindingEntry row .1.3.6.1.2.1.196.1.2.4.1

A set of objects that displays the mapping between
a specific WTP Virtual Radio Interface and a PHY
radio, and the wireless binding type for the PHY radio.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseWirelessBindingRadioId Represents the identifier of a PHY radio on a WTP, which is required to be unique on a WTP. For example, WTP A and WTP B use a same value of capwapBaseWirelessBindingRadioId for their first radio.	CapwapBaseRadioIdTC Type Constraints: range: 1..31	.1.3.6.1.2.1.196.1.2.4.1.1
capwapBaseWirelessBindingVirtualRadioIfIndex Represents the index value that uniquely identifies a WLAN Virtual Radio Interface. The interface identified by a particular value of this index is the same interface as identified by the same value of the ifIndex. Bef…	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.2.1.196.1.2.4.1.2
capwapBaseWirelessBindingType Represents the wireless binding type for the radio. The following enumerated values are supported: dot11(1) - IEEE 802.11 epc(3) - EPCGlobal	Enumeration	.1.3.6.1.2.1.196.1.2.4.1.3

A table of objects that display stations that are accessing
the wireless service provided by the AC.

capwapBaseStationEntry row .1.3.6.1.2.1.196.1.2.5.1

A set of objects that displays a station that is
associated with the specific radio on the WTP.
Note that in some cases such as roaming that a station may
simultaneously associate with two WTPs for some (short) time.
Th…

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseStationId Represents the unique identifier of the station.	CapwapBaseStationIdTC Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.2.5.1.1
capwapBaseStationWtpId Represents the unique identifier of a WTP in running state.	CapwapBaseWtpIdTC Type Constraints: range: 6 range: 8	.1.3.6.1.2.1.196.1.2.5.1.2
capwapBaseStationWtpRadioId Represents the identifier of a PHY radio on a WTP, which is required to be unique on a WTP. For example, WTP A and WTP B use a same value of capwapBaseStationWtpRadioId for their first radio.	CapwapBaseRadioIdTC Type Constraints: range: 1..31	.1.3.6.1.2.1.196.1.2.5.1.3
capwapBaseStationAddedTime Represents the time when the station is added.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.2.1.196.1.2.5.1.4
capwapBaseStationVlanName Represents VLAN name to which the station is associated.	OctetString	.1.3.6.1.2.1.196.1.2.5.1.5

A table of objects that display the WTPs' events statistics.

capwapBaseWtpEventsStatsEntry row .1.3.6.1.2.1.196.1.2.6.1

A set of objects that displays the events statistics
of a WTP.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseWtpEventsStatsRebootCount Represents the number of reboots that have occurred due to a WTP crash. Note that the CAPWAP field [RFC5415] modeled by this counter takes the value 65535 to indicate that the information is not available…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.1
capwapBaseWtpEventsStatsInitCount Represents the number of reboots that have occurred at the request of a CAPWAP protocol message, such as a change in configuration that requires a reboot or an explicit CAPWAP protocol reset request. Note that the CAPWA…	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.2
capwapBaseWtpEventsStatsLinkFailureCount Represents the number of times that a CAPWAP protocol connection with an AC has failed due to link failures.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.3
capwapBaseWtpEventsStatsSwFailureCount Represents the number of times that a CAPWAP protocol connection with an AC has failed due to software-related reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.4
capwapBaseWtpEventsStatsHwFailureCount Represents the number of times that a CAPWAP protocol connection with an AC has failed due to hardware-related reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.5
capwapBaseWtpEventsStatsOtherFailureCount Represents the number of times that a CAPWAP protocol connection with an AC has failed due to known reasons, other than the AC-initiated, link, software or hardware failures.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.6
capwapBaseWtpEventsStatsUnknownFailureCount Represents the number of times that a CAPWAP protocol connection with an AC has failed for unknown reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.6.1.7
capwapBaseWtpEventsStatsLastFailureType Represents the failure type of the most recent WTP failure. The following enumerated values are supported: unsupported(0) - Not supported acInit(1) - The AC initiated linkFailure(2) - Link failure swFail…	Enumeration	.1.3.6.1.2.1.196.1.2.6.1.8

A table of objects that display statistics on the radios'
behaviors and reasons why the WTP radio has been reset.
To get the events statistics of all radios on a specific WTP
(identified by the capwapBaseWtpCurrId), a query
operation SHOULD run from radio ID 1 to radio ID 31 until there
is no data returned.  The radio ID here corresponds to the
object capwapBaseRadioEventsWtpRadioId.  If the previous MIB
operations such as query on the capwapBaseWirelessBindingTable
know the exact value of each radio ID, the query operation on
the capwapBaseRadioEventsStatsTable could use that value
of Radio IDs.

capwapBaseRadioEventsStatsEntry row .1.3.6.1.2.1.196.1.2.7.1

A set of objects that displays the statistical data of
events that happened on a specific radio of a WTP.

Indexes

No indexes recorded

Column	Syntax	OID
capwapBaseRadioEventsWtpRadioId Represents the identifier of a PHY radio on a WTP, which is required to be unique on a WTP. For example, WTP A and WTP B use the same value of capwapBaseRadioEventsWtpRadioId for their first radio.	CapwapBaseRadioIdTC Type Constraints: range: 1..31	.1.3.6.1.2.1.196.1.2.7.1.1
capwapBaseRadioEventsStatsResetCount Represents the number of times that the radio has been reset.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.2
capwapBaseRadioEventsStatsSwFailureCount Represents the number of times that the radio has failed due to software-related reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.3
capwapBaseRadioEventsStatsHwFailureCount Represents the number of times that the radio has failed due to hardware-related reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.4
capwapBaseRadioEventsStatsOtherFailureCount Represents the number of times that the radio has failed due to known reasons, other than software or hardware failure.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.5
capwapBaseRadioEventsStatsUnknownFailureCount Represents the number of times that the radio has failed for unknown reasons.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.6
capwapBaseRadioEventsStatsConfigUpdateCount Represents the number of times that the radio configuration has been updated.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.7
capwapBaseRadioEventsStatsChannelChangeCount Represents the number of times that the radio channel has been changed.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.8
capwapBaseRadioEventsStatsBandChangeCount Represents the number of times that the radio has changed frequency bands.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.9
capwapBaseRadioEventsStatsCurrNoiseFloor Represents the noise floor of the radio receiver in units of dBm.	dBmSNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.2.1.196.1.2.7.1.10
capwapBaseRadioEventsStatsDecryptErrorCount Represents the number of decryption errors that have occurred on the WTP. Note that this field is only valid in cases where the WTP provides encryption/decryption services.	SNMPv2-SMICounter32 Type Constraints: range: 0..4294967295	.1.3.6.1.2.1.196.1.2.7.1.11
capwapBaseRadioEventsStatsLastFailureType Represents the failure type of the most recent radio failure. The following enumerated values are supported: unsupported(0) - Not supported swFailure(1) - Software failure hwFailure(2) - Hardware failure …	Enumeration	.1.3.6.1.2.1.196.1.2.7.1.12