CAMBIUM-PTP800-MIB Table View

A priority queue mapping table. This is a list of packet queues indexed by Ethernet priority.

ethernetPriorityTableEntry row .1.3.6.1.4.1.17713.8.6.15.1

Table EthernetPriorityTable

Indexes

ethernetPriorityTableIndex

Column	Syntax	OID
ethernetPriorityQueueMapping Configures the classification of this Ethernet priority (also known as IEEE 802.1p value) to an egress queue at the wireless port.	Enumerationr/w Enumerated Values: 0 q0 1 q1 2 q2 3 q3 4 q4 5 q5 6 q6 7 q7	.1.3.6.1.4.1.17713.8.6.15.1.1
ethernetPriorityTableIndex Ethernet priority flag, used to index values in the ethernetPriorityTable.	Enumeration Enumerated Values: 1 p0 2 p1 3 p2 4 p3 5 p4 6 p5 7 p6 8 p7 9 untagged	.1.3.6.1.4.1.17713.8.6.15.1.2

A priority queue mapping table. This is a list of packet queues associated with the different layer 2 control protocol frameworks.

l2CPPriorityTableEntry row .1.3.6.1.4.1.17713.8.6.32.1

Table L2CPPriorityTable

Indexes

l2CPPriorityTableIndex

Column	Syntax	OID
l2CPPriorityQueueMapping Configures the classification of this layer two control protocol (L2CP) to an egress queue at the wireless port	Enumerationr/w Enumerated Values: 0 q0 1 q1 2 q2 3 q3 4 q4 5 q5 6 q6 7 q7	.1.3.6.1.4.1.17713.8.6.32.1.1
l2CPPriorityTableIndex layer 2 control protocol, used to index values in the l2CPPriorityTable.	Enumeration Enumerated Values: 1 bridge 2 gARPMRP 3 cFM 4 rAPS 5 eAPS	.1.3.6.1.4.1.17713.8.6.32.1.2

A priority queue mapping table. This is a list of packet queues indexed by L3 IP DSCP priority.

iPDSCPPriorityTableEntry row .1.3.6.1.4.1.17713.8.6.38.1

Table IPDSCPPriorityTable

Indexes

iPDSCPPriorityTableIndex

Column	Syntax	OID
iPDSCPPriorityQueueMapping Configures the classification of this IP differentiated services code point (DSCP) value to an egress queue at the wireless port	Enumerationr/w Enumerated Values: 0 q0 1 q1 2 q2 3 q3 4 q4 5 q5 6 q6 7 q7	.1.3.6.1.4.1.17713.8.6.38.1.1
iPDSCPPriorityTableIndex IP DSCP priority flag, used to index values in the iPDSCPPriorityTable	Integer32 Constraints: range: 1-64	.1.3.6.1.4.1.17713.8.6.38.1.2

A priority queue mapping table. This is a list of priority queues indexed by MPLS TC priority.

mPLSTCPriorityTableEntry row .1.3.6.1.4.1.17713.8.6.40.1

Table MPLSTCPriorityTable

Indexes

mPLSTCPriorityTableIndex

Column	Syntax	OID
mPLSTCPriorityQueueMapping Configures the classification of this MPLS traffic class (the field formerly known as EXP) to an egress queue at the wireless port	Enumerationr/w Enumerated Values: 0 q0 1 q1 2 q2 3 q3 4 q4 5 q5 6 q6 7 q7	.1.3.6.1.4.1.17713.8.6.40.1.1
mPLSTCPriorityTableIndex MPLS TC priority flag, used to index values in the mPLSTCPriorityTable	Integer32 Constraints: range: 1-8	.1.3.6.1.4.1.17713.8.6.40.1.2

SNMP trap configuration table.

sNMPTrapTableEntry row .1.3.6.1.4.1.17713.8.16.10.1

Table SNMPTrapTable

Indexes

sNMPTrapTableIndex

Column	Syntax	OID
sNMPTrapTableIndex SNMP trap value, used to index the SNMPTrapTable.	Integer32 Constraints: range: 1-2	.1.3.6.1.4.1.17713.8.16.10.1.1
sNMPTrapIPAddress The IP address to which all SNMP Traps are sent. NB: A system reboot is required to activate changes to this attribute.	SNMPv2-SMIIpAddressr/w Type Constraints: range: 4	.1.3.6.1.4.1.17713.8.16.10.1.2
sNMPTrapPortNumber Destination port for SNMP Traps (default=162). NB: A system reboot is required to activate changes to this attribute.	Integer32r/w Constraints: range: 0-65535	.1.3.6.1.4.1.17713.8.16.10.1.3
sNMPTrapInternetAddressType The type of Internet address specified by the associated sNMPTrapInternetAddress.	Enumeration Enumerated Values: 0 unknown 1 ipv4 2 ipv6 3 ipv4z 4 ipv6z 5 unknown6 6 unknown7 7 unknown8 8 unknown9 9 unknown10 10 unknown11 11 unknown12 12 unknown13 13 unknown14 14 unknown15 15 unknown16 16 dns	.1.3.6.1.4.1.17713.8.16.10.1.4
sNMPTrapInternetAddress The Internet address to which all SNMP Traps are sent.	INET-ADDRESS-MIBInetAddressr/w Type Constraints: range: 0..255	.1.3.6.1.4.1.17713.8.16.10.1.5
sNMPTrapReceiverEnabled A value of 0 disables the sending of SNMP trap to corresponding receiver. A value of 1 enables the sending of SNMP trap to corresponding receiver.	Enumeration Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.17713.8.16.10.1.6

The User Table Control group contains objects specifically for user account management.

userTableEntry row .1.3.6.1.4.1.17713.8.29.2.1

Table UserTable

Indexes

userTableIndex

Column	Syntax	OID
userTableIndex used to index values in the userTable.	Integer32 Constraints: range: 1-10	.1.3.6.1.4.1.17713.8.29.2.1.1
userName User name which must be entered, along with the appropriate password, in order to gain access to the system.	OctetString	.1.3.6.1.4.1.17713.8.29.2.1.2
userRole Role of the selected user. A Security Officer has access to and can modify all settings. A System Administrator has access to and can modify all non-security settings. A Read Only user can view settings, but cannot m…	Enumeration Enumerated Values: 0 readOnly 1 systemAdministrator 2 securityOfficer	.1.3.6.1.4.1.17713.8.29.2.1.3
userEnabled Enable / Disable the selected user	Enumeration Enumerated Values: 0 disabled 1 enabled	.1.3.6.1.4.1.17713.8.29.2.1.4
userPassword User password, which must be entered in order to gain access to the system.	OctetStringr/w	.1.3.6.1.4.1.17713.8.29.2.1.5