CAMBIUM-NETWORKS-DYNAMIC-ARP-INSPECTION-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

cnDaiVlanCfgTable

table
.1.3.6.1.4.1.2076.110.2.1 · 1 row entry · 12 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnDaiVlanCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-DYNAMIC-ARP-INSPECTION-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-DYNAMIC-ARP-INSPECTION-MIB::cnDaiVlanCfgTable' 
This table contains the configuration & statistics collection
parameters of Dynamic ARP Inspection for a specified VLAN.
cnDaiVlanCfgEntry row .1.3.6.1.4.1.2076.110.2.1.1
Each row instance gives the Dynamic ARP Inspection status on VLAN and the
in that VLAN for the Dynamic ARP Inspection module
Indexes
Column Syntax OID
cnDaiVlanCfgVlanId
Vlan ID of the VLAN to which this table-entry is associated.
VlanId
Type Constraints:
range: 1..4094
 .1.3.6.1.4.1.2076.110.2.1.1.1
cnDaiVlanCfgDaiAdminStatus
This OID is used to enable or disable the Dynamic ARP inspection on a per-VLAN basis.
AdminStatusr/w
Type Values:
1enabled
2disabled
 .1.3.6.1.4.1.2076.110.2.1.1.2
cnDaiVlanForwarded
Indicates the total number of ARP packets which successfully passed all
the validity checks specific to Dynamic ARP inspection being subject to
forwarding.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.3
cnDaiVlanDropped
Indicates the total number of ARP packets which did not passed
one of the validity checks specific to Dynamic ARP inspection,
meaning that it will be dropped.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.4
cnDaiVlanInvalidProtocolData
Indicates the total number of ARP packets which contain data
that is not valid for the ARP packet format.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.5
cnDaiVlanSrcMacValidationFailures
Indicates the total number of ARP packets for which the source
HW address from the ARP payload didn't match any MAC address
in the binding table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.6
cnDaiVlanIpValidationFailures
Indicates the total number of ARP packets for which the source
protocol address from the ARP payload specific to source HW address
also from the ARP payload didn't match any IP address in the binding table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.7
cnDaiVlanDhcpBindingsPermitted
Indicates the total number of ARP packets which were validated against an
entry in the binding table which was learned through DHCP Snooping.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.8
cnDaiVlanDhcpBindingsDenied
Indicates the total number of ARP packets which were invalidated against an
entry in the binding table which was learned through DHCP Snooping.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.9
cnDaiVlanStaticBindingsPermitted
Indicates the total number of ARP packets which were validated against a
static entry from the binding table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.10
cnDaiVlanStaticBindingsDenied
Indicates the total number of ARP packets which were invalidated against a
static entry from the binding table.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.2076.110.2.1.1.11
cnDaiVlanCfgRowStatus
Row-Status of the VLAN interface entry.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.2076.110.2.1.1.12

cnDaiIfCfgTable

table
.1.3.6.1.4.1.2076.110.3.1 · 1 row entry · 2 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnDaiIfCfgTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-DYNAMIC-ARP-INSPECTION-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-DYNAMIC-ARP-INSPECTION-MIB::cnDaiIfCfgTable' 
This table contains the configuration & statistics collection
parameters of Dynamic ARP Inspection for a specified VLAN.
cnDaiIfCfgEntry row .1.3.6.1.4.1.2076.110.3.1.1
Each row instance gives the Dynamic ARP Inspection status on VLAN and the
in that VLAN for the Dynamic ARP Inspection module
Indexes
Column Syntax OID
cnDaiIfCfgIfIndex
Port (ifIndex) identifier attribute
Integer32
Constraints:
range: 1-60
 .1.3.6.1.4.1.2076.110.3.1.1.1
cnDaiIfCfgTrustState
Set the Dynamic ARP Inspection trust state for the given interface.
If the interface is part of a port channel it cannot be set.
TrustStater/w
Type Values:
0untrusted
1trusted
 .1.3.6.1.4.1.2076.110.3.1.1.2