CAMBIUM-NETWORKS-AUTO-ATTACH-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
10
Rows
10
Columns
117

cnAutoAttachPortTable

table
.1.3.6.1.4.1.17713.24.1.1.10 · 1 row entry · 21 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachPortTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachPortTable' 
This table contains port-specific data
for the Auto-Attach application.
cnAutoAttachPortEntry row .1.3.6.1.4.1.17713.24.1.1.10.1
Port-specific data related to the
Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachPortIfIndex
Port (ifIndex) identifier attribute.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.17713.24.1.1.10.1.1
cnAutoAttachPortState
The current port state from an Auto-Attach
perspective. Indicates whether remote device
data associated with the port will be examined
for Auto-Attach processing purposes.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.10.1.2
cnAutoAttachPortMsgAuthStatus
Controls the current Auto-Attach message
authentication status for the associated
interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.10.1.3
cnAutoAttachPortMsgAuthKey
Provides access to the Auto-Attach message
authentication key for the associated interface.
Can be used to establish a new key of length
1..32 octets. Always returns a zero-length
string when queried.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.10.1.4
cnAutoAttachPortActivePolicyName
Name of the policy specification that is
currently applied to the port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.17713.24.1.1.10.1.5
cnAutoAttachPortPolicyApplied
The number of times a policy has been applied
to the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.6
cnAutoAttachPortPolicyExpired
The number of times a policy has expired on
the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.7
cnAutoAttachPortPolicyErrors
The number of times an error has been detected
during policy application/expiration on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.8
cnAutoAttachPortRowStatus
This object allows entries to be created, deleted
and modified in the cnAutoAttachPortTable, if the
operation is supported by the agent.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.10.1.9
cnAutoAttachPortTlvTxEnable
This object supports enabling/disabling PBA/AA TLV
transmission with LLDP. TLV transmission is enabled
on the port when the associated bit is 1 and disabled
when the bit is 0. Support for specific PBA TLVs is
platform-…
Bitsr/w
Enumerated Values:
0pbaAuthenticationTlv
1pbaDeviceSettingsTlv
 .1.3.6.1.4.1.17713.24.1.1.10.1.10
cnAutoAttachPortDevSettingsTlvReceived
The number of times a PBA Device Settings TLV
has been received by LLDP on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.11
cnAutoAttachPortDevSettingsTlvProcessed
The number of times a PBA Device Settings TLV
has been processed by the PBA agent on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.12
cnAutoAttachPortDevSettingsTlvAuthFails
The number of times a PBA Device Settings TLV
has been dropped because of an authentication
failure on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.13
cnAutoAttachPortPrevPolicyName
Name of the policy specification that was
previously applied to the port.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.17713.24.1.1.10.1.14
cnAutoAttachPortAuthTlvReceived
The number of times a PBA Authentication TLV
has been received by LLDP on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.15
cnAutoAttachPortAuthTlvProcessed
The number of times a PBA Authentication TLV
has been processed by the PBA agent on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.16
cnAutoAttachPortAuthTlvChanged
The number of times a PBA Authentication TLV
that is different than the previously processed
Authentication TLV has been processed by the PBA
agent on the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.10.1.17
cnAutoAttachPortAutoVlanServerDiscovery
Controls Auto-VLAN server discovery
for the associated interface.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.10.1.18
cnAutoAttachPortAutoVlanServerStatus
Exports the current Auto-VLAN server
status for the associated interface.

notDiscovered(1) - no server detected
discovered(2) - server detected
connected(3) - server detected and
Auto-VLA…
Enumeration
Enumerated Values:
1notDiscovered
2discovered
3connected
 .1.3.6.1.4.1.17713.24.1.1.10.1.19
cnAutoAttachPortAutoVlanServerTrunkStatus
Exports the current Auto-VLAN server trunk
status for the associated interface. Status
is 'enabled' when the interface mode has
been dynamically transitioned to Trunk mode.
Enumeration
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.10.1.20
cnAutoAttachPortRestrictedMacMatch
When enabled, additional checks are performed
during evaluation of MAC address-based policies
to ensure that they are only applied to the
port if only a single MAC address has been
learned or where the MAC that is matc…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.10.1.21

cnAutoAttachRuleTable

table
.1.3.6.1.4.1.17713.24.1.1.11 · 1 row entry · 6 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachRuleTable' 
This table contains the rule specifications 
for the Auto-Attach application.
cnAutoAttachRuleEntry row .1.3.6.1.4.1.17713.24.1.1.11.1
Information about the rule specifications
for the Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachRuleName
Name for the rule specification.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17713.24.1.1.11.1.1
cnAutoAttachRuleType
Rule type identifier. The rule type determines
how a device is identified using data associated
with the device (e.g., using exported LLDP TLV
data, device MAC address data, etc.).
Enumerationr/w
Enumerated Values:
1none
2lldpAny
3lldpCapabilities
4lldpSystemName
5lldpSystemDescription
6lldpChassisId
7lldpPortId
8lldpPortDescription
9macOui
10macFullAddress
11macAddressRange
12lldpIpv4MgmtAddress
13autoVlan
14defaultAnyMac
15ifc8021x
16autoVoip
17macList
 .1.3.6.1.4.1.17713.24.1.1.11.1.2
cnAutoAttachRuleDeviceData
Specifies the data that is used to identify a
device. Data application depends on the associated
detection method (cnAutoAttachRuleType).
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.17713.24.1.1.11.1.3
cnAutoAttachRuleRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachRuleTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.11.1.4
cnAutoAttachRuleListName
The Rule List Name is used to link rules.
Rules belonging to the same list (based on
the rule list name attribute) are treated
as a single rule during evaluation when
referenced by a policy.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.11.1.5
cnAutoAttachRuleDataFileName
File name that identifies downloaded data
that can be used to specify rule criteria,
if needed, as determined by the rule type.
OctetStringr/w
Constraints:
range: 0-128
 .1.3.6.1.4.1.17713.24.1.1.11.1.6

cnAutoAttachActionTable

table
.1.3.6.1.4.1.17713.24.1.1.12 · 1 row entry · 19 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachActionTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachActionTable' 
This table contains the action specifications 
for the Auto-Attach application.
cnAutoAttachActionEntry row .1.3.6.1.4.1.17713.24.1.1.12.1
Information about the action specifications
for the Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachActionName
Name for the action specification.

Action is localized if the name includes
a localization ('@localizationValue')
suffix. The base action name is 1..32
characters while the localization value
is 0..32 cha…
OctetString
Constraints:
range: 1-65
 .1.3.6.1.4.1.17713.24.1.1.12.1.1
cnAutoAttachActionVlanDatadeprecated
Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 200 VLANs can be specified.
…
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.17713.24.1.1.12.1.2
cnAutoAttachActionPvid
Default/native VLAN ID for an interface.
A value of 0 indicates an PVID update
action is not requested.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.17713.24.1.1.12.1.3
cnAutoAttachActionPortMode
Port mode for an interface. A value of
'none(1)' indicates that no update is
requested.
Enumerationr/w
Enumerated Values:
1none
2access
3trunk
4hybrid
 .1.3.6.1.4.1.17713.24.1.1.12.1.4
cnAutoAttachActionRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachActionTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.12.1.5
cnAutoAttachActionUserPriority
Default user priority value for an interface.
A value of 8 indicates a user priority update
action is not requested.
Integer32r/w
Constraints:
range: 0-8
 .1.3.6.1.4.1.17713.24.1.1.12.1.6
cnAutoAttachActionQosTrust
QoS trust setting for an interface. A value
of 'none(1)' indicates that no update is
requested.
Enumerationr/w
Enumerated Values:
1none
2untrusted
3dot1p
4dscp
 .1.3.6.1.4.1.17713.24.1.1.12.1.7
cnAutoAttachActionUplinkData
Specifies interfaces to be considered for
VLAN membership updates when VLAN membership
updates are initiated through processing of
the cnAutoAttachActionVlanData and the
cnAutoAttachActionExtVlanData objects.
…
OctetStringr/w
Constraints:
range: 0-31
 .1.3.6.1.4.1.17713.24.1.1.12.1.8
cnAutoAttachActionPoePriority
PoE priority setting for an interface. A
value of 'none(1)' indicates that no update
is requested.
Enumerationr/w
Enumerated Values:
1none
2critical
3high
4low
 .1.3.6.1.4.1.17713.24.1.1.12.1.9
cnAutoAttachActionPvidUpdateReset
PVID update modifier setting. When 'enabled(1)',
if the port PVID is updated when a policy applied,
the port will be bounced (shutdown/no shutdown).
If 'disabled(2)', the port is not bounced.
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.10
cnAutoAttachActionProtectedPort
Protected port setting. When 'enabled(2)', the
port will be made protected in terms of VLAN
operation. If 'disabled(3)', the port will not
operate as a protected port.
Enumerationr/w
Enumerated Values:
1none
2enabled
3disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.11
cnAutoAttachActionCambiumSync
Cambium Sync setting. When 'enabled(2)', the
the Cambium Sync signal will be generated on
the port. If 'disabled(3)', Cambium Sync will
not be generated on the port.

If a device does not support this f…
Enumerationr/w
Enumerated Values:
1none
2enabled
3disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.12
cnAutoAttachActionPortSpeed
Port Speed setting. Supports enabling (the
'negotiated' options) or disabling (the 'forced'
option) port speed auto-negotiation and sets
the negotiated maximum or hardcoded speed.

If a device does not sup…
Enumerationr/w
Enumerated Values:
1none
2negotiated10Mbps
3negotiated100Mbps
4negotiated1Gbps
5negotiated2500Mbps
6forced10Mbps
7forced100Mbps
8forced1Gbps
9forced2500Mbps
 .1.3.6.1.4.1.17713.24.1.1.12.1.13
cnAutoAttachActionPortAdr
Port Automatic Device Recovery (ADR) setting.
Supports enabling or disabling the ADR status
for a port.

If a device does not support this functionality,
the value of this attribute is silently ignored.
Enumerationr/w
Enumerated Values:
1none
2enabled
3disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.14
cnAutoAttachActionAutoVoip
Automatic voice device processing (Auto-VoIP).
Supports enabling or disabling automatic voice
device processing. When 'enabled(1)', port settings
are updated to support a connected VoIP device
leveraging the global voi…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.15
cnAutoAttachActionExtVlanData
Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 200 VLANs can be specified.
…
OctetStringr/w
Constraints:
range: 0-250
 .1.3.6.1.4.1.17713.24.1.1.12.1.16
cnAutoAttachActionStpPortfast
STP portfast setting. When 'enabled(2)', STP
portfast processing will be enabled on the port.
If 'disabled(3)', STP portfast processing will
not be enabled on the port.
Enumerationr/w
Enumerated Values:
1none
2enabled
3disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.17
cnAutoAttachActionExcludeVlans
VLAN update modifier setting. When 'enabled(1)',
current VLAN memberships will be cleared when a
policy is applied. If 'disabled(2)', current VLAN
memberships will not be explicitly cleared.

Setting is i…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.12.1.18
cnAutoAttachActionDhcpSnoopTrust
DHCP Snooping trust state setting. When 'untrusted(2)',
the port's DHCP Snooping trust state will be set to
untrusted. If 'trusted(3)', the port's DHCP Snooping
trust state will be set to trusted.
Enumerationr/w
Enumerated Values:
1none
2untrusted
3trusted
 .1.3.6.1.4.1.17713.24.1.1.12.1.19

cnAutoAttachPolicyTable

table
.1.3.6.1.4.1.17713.24.1.1.13 · 1 row entry · 16 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachPolicyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachPolicyTable' 
This table contains the policy specifications 
for the Auto-Attach application.
cnAutoAttachPolicyEntry row .1.3.6.1.4.1.17713.24.1.1.13.1
Information about the policy specifications
for the Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachPolicyName
Name for the policy specification.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17713.24.1.1.13.1.1
cnAutoAttachPolicyStatus
Status of the policy specification. A
'enabled(1)' policy can be applied to an
interface based on device detection. A
'disabled(2)' policy will never be applied.
Disabling a policy that is currently applied
to an interf…
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.13.1.2
cnAutoAttachPolicyPrecedence
Precedence to use for selecting a policy
when multiple policies match a device. A
policy with a lower precedence value is
applied before a policy with a higher
precedence value.

If a zero precedence va…
Integer32r/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.17713.24.1.1.13.1.3
cnAutoAttachPolicyRuleName
Name of the rule specification that is
referenced by the policy. The rule must
be defined to be referenced.

Rule name and rule type/device data are
mutually-exclusive and can't be configured
in the sa…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.13.1.4
cnAutoAttachPolicyRuleType
Rule type identifier. The rule type determines
how a device is identified using data associated
with the device (e.g., using exported LLDP TLV
data, device MAC address data, etc.).

Rule name and rule typ…
Enumerationr/w
Enumerated Values:
1none
2lldpAny
3lldpCapabilities
4lldpSystemName
5lldpSystemDescription
6lldpChassisId
7lldpPortId
8lldpPortDescription
9macOui
10macFullAddress
 .1.3.6.1.4.1.17713.24.1.1.13.1.5
cnAutoAttachPolicyRuleDeviceData
Specifies the data that is used to identify a
device. Data application depends on the associated
detection method (cnAutoAttachPolicyRuleType).

Rule name and rule type/device data are
mutually-exclusive…
OctetStringr/w
Constraints:
range: 0-60
 .1.3.6.1.4.1.17713.24.1.1.13.1.6
cnAutoAttachPolicyActionName
Name of the action specification that is
referenced by the policy. The action must
be defined to be referenced.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.13.1.7
cnAutoAttachPolicyActionVlanData
Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 50 VLANs can be specified.
…
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.17713.24.1.1.13.1.8
cnAutoAttachPolicyActionPvid
Default/native VLAN ID for an interface.
A value of 0 indicates an PVID update action
is not requested.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
in the sa…
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.17713.24.1.1.13.1.9
cnAutoAttachPolicyActionPortMode
Port mode for an interface. A value of
'none(1)' indicates that no update is
requested.

Action name and VLAN data/pvid/port mode are
mutually-exclusive and can't be configured
in the same policy.
Enumerationr/w
Enumerated Values:
1none
2access
3trunk
4hybrid
 .1.3.6.1.4.1.17713.24.1.1.13.1.10
cnAutoAttachPolicyApplied
The number of times this policy specification
has been applied to an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.13.1.11
cnAutoAttachPolicyExpired
The number of times this policy specification
has expired on an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.13.1.12
cnAutoAttachPolicyErrors
The number of times an error has occurred
during application/expiration of this policy
specification on an interface.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.13.1.13
cnAutoAttachPolicyRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachPolicyTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.13.1.14
cnAutoAttachPolicyPortList
Specifies interfaces to be considered during
policy match criteria evaluation. If interface
data is specified, only interfaces that are
identified by this attribute are considered
potential policy matches.
…
OctetStringr/w
Constraints:
range: 0-200
 .1.3.6.1.4.1.17713.24.1.1.13.1.15
cnAutoAttachPolicyTodName
Name of the Time-of-Day specification that
is referenced by the policy. The ToD spec
must be defined to be referenced.
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.13.1.16

cnAutoAttachScriptTable

table
.1.3.6.1.4.1.17713.24.1.1.14 · 1 row entry · 4 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachScriptTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachScriptTable' 
This table contains the script definitions 
for the Auto-Attach application.
cnAutoAttachScriptEntry row .1.3.6.1.4.1.17713.24.1.1.14.1
Information about the script definitions
for the Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachScriptName
Name for the script definition.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17713.24.1.1.14.1.1
cnAutoAttachScriptActionVlanData
Specifies VLAN IDs to be associated with
an interface. VLAN data is specified using a
string containing comma-separated individual
VLANs and VLAN ranges (e.g., '8,10,30-35').
A maximum of 50 VLANs can be specified.
…
OctetStringr/w
Constraints:
range: 0-100
 .1.3.6.1.4.1.17713.24.1.1.14.1.2
cnAutoAttachScriptActionPvid
Default/native VLAN ID for an interface.
A value of 0 indicates a PVID update action
is not requested.
Integer32r/w
Constraints:
range: 0-4094
 .1.3.6.1.4.1.17713.24.1.1.14.1.3
cnAutoAttachScriptRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachScriptTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.14.1.4

cnAutoAttachCondensedNbrTable

table
.1.3.6.1.4.1.17713.24.1.1.15 · 1 row entry · 24 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachCondensedNbrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachCondensedNbrTable' 
This table contains port-specific condensed 
neighbor data used by the Auto-Attach application.
cnAutoAttachCondensedNbrEntry row .1.3.6.1.4.1.17713.24.1.1.15.1
Port-specific condensed neighbor data used by
the Auto-Attach application. Data is derived from
LLDP and the MAC address table at the time the
table data is queried.
Indexes
Column Syntax OID
cnAutoAttachCondensedNbrIfIndex
Interface (ifIndex) identifier attribute.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.17713.24.1.1.15.1.1
cnAutoAttachCondensedNbrName
Interface name used to identify the port
for configuration and monitoring.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.17713.24.1.1.15.1.2
cnAutoAttachCondensedNbrLldpChassisId
LLDP Chassis ID data associated with the
device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.15.1.3
cnAutoAttachCondensedNbrLldpPortId
LLDP Port ID data associated with the
device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.15.1.4
cnAutoAttachCondensedNbrLldpSystemName
LLDP System Name data associated with the
device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.15.1.5
cnAutoAttachCondensedNbrLldpSystemDesc
LLDP System Description data associated
with the device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.15.1.6
cnAutoAttachCondensedNbrLldpMgmtIpv4Addr
LLDP Mgmt IPv4 Address data associated
with the device connected to the port.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.17713.24.1.1.15.1.7
cnAutoAttachCondensedNbrMacAddress
The MAC address associated with the device
connected to the port. The MAC address is
returned in xx:xx:xx:xx:xx:xx format.

If a single MAC address is associated with
the port, it is returned.
…
OctetString
Constraints:
range: 0-0
range: 17-17
 .1.3.6.1.4.1.17713.24.1.1.15.1.8
cnAutoAttachCondensedNbrClassification
Presents the device's class memberships
based on the currently defined neighbor
class data (cnAutoAttachNbrClassTable)
and the LLDP device System Description
data.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.15.1.9
cnAutoAttachCondensedNbrIfHCInOctets
The total number of octets received on the
interface since the neighbor was learned.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.10
cnAutoAttachCondensedNbrIfHCInUcastPkts
The number of packets, delivered by this
sub-layer to a higher (sub-)layer, which
were not addressed to a multicast or broadcast
address at this sub-layer, since the neighbor
was learned.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.11
cnAutoAttachCondensedNbrIfHCInMulticastPkts
The number of packets, delivered by this
sub-layer to a higher (sub-)layer, which were
addressed to a multicast address at this
sub-layer, since the neighbor was learned.
For a MAC layer protocol, this includes both
Gro…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.12
cnAutoAttachCondensedNbrIfHCInBroadcastPkts
The number of packets, delivered by this
sub-layer to a higher (sub-)layer, which
were addressed to a broadcast address at
this sub-layer, since the neighbor was
learned.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.13
cnAutoAttachCondensedNbrIfHCOutOctets
The total number of octets transmitted out
of the interface, including framing characters,
since the neighbor was learned.
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.14
cnAutoAttachCondensedNbrIfHCOutUcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which
were not addressed to a multicast or broadcast
address at this sub-layer, including those that
were discarded or not sent, sinc…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.15
cnAutoAttachCondensedNbrIfHCOutMulticastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which
were addressed to a multicast address at this
sub-layer, including those that were discarded
or not sent, since the neighbor wa…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.16
cnAutoAttachCondensedNbrIfHCOutBroadcastPkts
The total number of packets that higher-level
protocols requested be transmitted, and which
were addressed to a broadcast address at this
sub-layer, including those that were discarded
or not sent, since the neighbor wa…
SNMPv2-SMICounter64
Type Constraints:
range: 0..18446744073709551615
 .1.3.6.1.4.1.17713.24.1.1.15.1.17
cnAutoAttachCondensedNbrTimeStamp
The value of sysUpTime when the current neighbor
was added to this table.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.17713.24.1.1.15.1.18
cnAutoAttachCondensedNbrIfInErrors
The total number of inbound packets that contained
errors preventing them from being deliverable to
a higher-layer protocol.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.19
cnAutoAttachCondensedNbrIfOutErrors
The total number of outbound packets that could
not be transmitted because of errors.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.20
cnAutoAttachCondensedNbrIfCRCAlignErrors
The total number of packets received that had a
length (excluding framing bits, but including FCS
octets) of between 64 and 1518 octets, inclusive,
but had either a bad Frame Check Sequence (FCS)
with an integral nu…
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.21
cnAutoAttachCondensedNbrIfLinkTransitions
The number of Link Up and Link Down transition
events counted for the port.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.22
cnAutoAttachCondensedNbrIfUndersizePkts
The total number of packets received that were
less than 64 octets long (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.23
cnAutoAttachCondensedNbrIfOversizePkts
The total number of packets received that were
longer than 1518 octets (excluding framing bits,
but including FCS octets) and were otherwise well
formed.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.17713.24.1.1.15.1.24

cnAutoAttachNbrClassTable

table
.1.3.6.1.4.1.17713.24.1.1.18 · 1 row entry · 5 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachNbrClassTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachNbrClassTable' 
This table contains neighbor classification 
data that is used to support filtering of the
Condensed Neighbor Table data.
cnAutoAttachNbrClassEntry row .1.3.6.1.4.1.17713.24.1.1.18.1
Associates a predefined neighbor class with a
string that can be used to identify devices as
class members based on processed LLDP data.
Indexes
Column Syntax OID
cnAutoAttachNbrClassType
Device class groups.
Enumeration
Enumerated Values:
1other
2bridge
3ap
4router
5phone
6radio
7camera
8cambium
9cambiumCnMatrix
10cambiumCnPilot
11cambiumWifiAp
12cambiumNse
 .1.3.6.1.4.1.17713.24.1.1.18.1.1
cnAutoAttachNbrClassIdentifier
Specifies the data used to identify a device
as a member of class cnAutoAttachNbrClassType
based on processed LLDP or MAC address data.
OctetString
Constraints:
range: 1-255
 .1.3.6.1.4.1.17713.24.1.1.18.1.2
cnAutoAttachNbrClassIdentifierType
Specifies whether the class identifier data
represents LLDP or MAC address data.
Enumerationr/w
Enumerated Values:
1lldp
2macOui
3macAddress
 .1.3.6.1.4.1.17713.24.1.1.18.1.3
cnAutoAttachNbrClassStorageType
Storage type associated with the
cnAutoAttachNbrClassTable entry.
SNMPv2-TCStorageType
Type Values:
1other
2volatile
3nonVolatile
4permanent
5readOnly
Description:
Describes the memory realization of a conceptual row. A
row which is volatile(2) is lost upon reboot. A row which
is either nonVolatile(3), permanent(4) or readOnly(5), is
backed up by stable storage. A row which is …
 .1.3.6.1.4.1.17713.24.1.1.18.1.4
cnAutoAttachNbrClassRowStatus
This object allows entries to be created
and deleted in the cnAutoAttachNbrClassTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.18.1.5

cnAutoAttachMacListFileTable

table
.1.3.6.1.4.1.17713.24.1.1.20 · 1 row entry · 5 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachMacListFileTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachMacListFileTable' 
This table contains MAC list file data
for the PBA/Auto-Attach application.
cnAutoAttachMacListFileEntry row .1.3.6.1.4.1.17713.24.1.1.20.1
MAC list file data related to the
PBA/Auto-Attach application.
Indexes
Column Syntax OID
cnAutoAttachMacListFileName
Name of the MAC list file associated
with this entry.
OctetString
Constraints:
range: 1-128
 .1.3.6.1.4.1.17713.24.1.1.20.1.1
cnAutoAttachMacListFileMacCount
Count of MAC addresses in the file.
Integer32
Constraints:
range: 1-1000
 .1.3.6.1.4.1.17713.24.1.1.20.1.2
cnAutoAttachMacListFileStatus
MAC list file status indication.
Enumeration
Enumerated Values:
1other
2pendingDownload
3downloading
4downloaded
5failedDownload
 .1.3.6.1.4.1.17713.24.1.1.20.1.3
cnAutoAttachMacListFileRefresh
MAC list file refresh status. Controls
if a file download is initiated only
when a new entry is created (disabled)
or also when an existing entry is
updated (enabled).
Enumerationr/w
Enumerated Values:
1enabled
2disabled
 .1.3.6.1.4.1.17713.24.1.1.20.1.4
cnAutoAttachMacListFileRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachMacListFileTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.20.1.5

cnAutoAttachTodTable

table
.1.3.6.1.4.1.17713.24.1.1.30 · 1 row entry · 8 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachTodTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachTodTable' 
This table contains the Time-of-Day (ToD)
specifications for the PBA application.
          
A ToD specification, when associated with a
PBA policy, determines if the policy is
effectively enabled or disabled (with regard
to policy evaluation) when processing LLDP
and MAC-based events. Disabled policies 
are skipped during event processing since
they can't be applied to any ports.
          
A ToD entry specifies either week-days or
a start/end date and a start/end time related
to those days/dates. Together, these components
establish a window of time that, when compared
to the current system clock value, determines
if the ToD specification is considered active
or inactive. A policy is 'ToD enabled' if the
ToD specification that it is associated with
is active and 'ToD disabled' if it is inactive.
cnAutoAttachTodEntry row .1.3.6.1.4.1.17713.24.1.1.30.1
Information about the ToD specifications
for the PBA application.
Indexes
Column Syntax OID
cnAutoAttachTodName
Name for the ToD specification.
OctetString
Constraints:
range: 1-32
 .1.3.6.1.4.1.17713.24.1.1.30.1.1
cnAutoAttachTodWeekDays
Specifies the days of the week that a ToD entry
is potentially active. Used when relative (day-
based) timing is required. A zero length string
indicates that absolute (date-based) timing is
required (i.e., TodStartDate…
OctetStringr/w
Constraints:
range: 0-56
 .1.3.6.1.4.1.17713.24.1.1.30.1.2
cnAutoAttachTodStartDate
Specifies the starting date that a ToD entry
is potentially active. Used when absolute (date-
based) timing is required. A zero length string
indicates that relative (day-based) timing is
required (i.e., TodWeekDays obj…
OctetStringr/w
Constraints:
range: 0-0
range: 10-10
 .1.3.6.1.4.1.17713.24.1.1.30.1.3
cnAutoAttachTodEndDate
Specifies the ending date that a ToD entry
is potentially active. Used when absolute (date-
based) timing is required. A zero length string
indicates that relative (day-based) timing is
required (i.e., TodWeekDays objec…
OctetStringr/w
Constraints:
range: 0-0
range: 10-10
 .1.3.6.1.4.1.17713.24.1.1.30.1.4
cnAutoAttachTodStartTime
Specifies the starting time that a ToD entry
is potentially active. Required for relative
and absolute ToD specifications.

Start time data is specified using a 24 hour clock
representation (e.g., hh:mm).…
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.17713.24.1.1.30.1.5
cnAutoAttachTodEndTime
Specifies the ending time that a ToD entry
is potentially active. Required for relative
and absolute ToD specifications.

End time data is specified using a 24 hour clock
representation (e.g., hh:mm). Bot…
OctetStringr/w
Constraints:
range: 5-5
 .1.3.6.1.4.1.17713.24.1.1.30.1.6
cnAutoAttachTodGroupName
The group name is used to link ToD entries.
ToD entries belonging to the same group (based
on the ToD group name attribute) are treated
as a single (cumulative) ToD specification
during evaluation when referenced by a p…
OctetStringr/w
Constraints:
range: 0-32
 .1.3.6.1.4.1.17713.24.1.1.30.1.7
cnAutoAttachTodRowStatus
This object allows entries to be created and deleted
in the cnAutoAttachTodTable.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.17713.24.1.1.30.1.8

cnAutoAttachCondensedNbrHistTable

table
.1.3.6.1.4.1.17713.24.1.1.31 · 1 row entry · 9 columns
Open in standard view
Uses the cambium variant from /opt/observium/mibs/cambium.
Command help
Walk cnAutoAttachCondensedNbrHistTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB' -M '/opt/observium/mibs/cambium:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CAMBIUM-NETWORKS-AUTO-ATTACH-MIB::cnAutoAttachCondensedNbrHistTable' 
This table contains port-specific condensed 
neighbor history data tracked by the Auto-Attach
application.
cnAutoAttachCondensedNbrHistEntry row .1.3.6.1.4.1.17713.24.1.1.31.1
Port-specific condensed neighbor history data
tracked by the Auto-Attach application. Data is
derived from LLDP and the MAC address table at
the time the neighbor was originally detected.
Indexes
Column Syntax OID
cnAutoAttachCondensedNbrHistIfIndex
Interface (ifIndex) identifier attribute.
Integer32
Constraints:
range: 1-65535
 .1.3.6.1.4.1.17713.24.1.1.31.1.1
cnAutoAttachCondensedNbrHistTimeStamp
The value of sysUpTime when the previous neighbor
was added to the Auto-Attach Condensed Nbr table.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.17713.24.1.1.31.1.2
cnAutoAttachCondensedNbrHistName
Interface name used to identify the port
for configuration and monitoring.
OctetString
Constraints:
range: 0-20
 .1.3.6.1.4.1.17713.24.1.1.31.1.3
cnAutoAttachCondensedNbrHistLldpChassisId
LLDP Chassis ID data associated with the
device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.31.1.4
cnAutoAttachCondensedNbrHistLldpSystemName
LLDP System Name data associated with the
device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.31.1.5
cnAutoAttachCondensedNbrHistLldpSystemDesc
LLDP System Description data associated
with the device connected to the port.
OctetString
Constraints:
range: 0-255
 .1.3.6.1.4.1.17713.24.1.1.31.1.6
cnAutoAttachCondensedNbrHistLldpMgmtIpv4Addr
LLDP Mgmt IPv4 Address data associated
with the device connected to the port.
OctetString
Constraints:
range: 0-15
 .1.3.6.1.4.1.17713.24.1.1.31.1.7
cnAutoAttachCondensedNbrHistMacAddress
The MAC address associated with the device
connected to the port. The MAC address is
returned in xx:xx:xx:xx:xx:xx format.

If a single MAC address is associated with
the port, it is returned.
…
OctetString
Constraints:
range: 0-0
range: 17-17
 .1.3.6.1.4.1.17713.24.1.1.31.1.8
cnAutoAttachCondensedNbrHistTimeCleared
The value of sysUpTime when the previous neighbor
was cleared from the Auto-Attach Condensed Nbr table.
SNMPv2-TCTimeStamp
Based On: SNMPv2-SMITimeTicks
Description:
The value of the sysUpTime object at which a specific
occurrence happened. The specific occurrence must be

defined in the description of any object defined using this
type.

If sysUpTime is reset t…
 .1.3.6.1.4.1.17713.24.1.1.31.1.9