CADANT-TIME-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
2
Rows
2
Columns
14

cadNtpSourceTable

table
.1.3.6.1.4.1.4998.1.1.5.2.3.10.10 · 1 row entry · 10 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadNtpSourceTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-TIME-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-TIME-MIB::cadNtpSourceTable' 
Configuration and display table for NTP servers and/or peers.
cadNtpSourceEntry row .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1
Each entry represents an association this device has with
an NTP server or peer.
Indexes
Column Syntax OID
cadNtpSourceIpAddress
The IPv4 address associated with this NTP server or peer.
SNMPv2-SMIIpAddress
Type Constraints:
range: 4
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.1
cadNtpSourceType
This table may only contain entries of one type.
Attempts to create additional rows which have a
cadNtpSourceType different from the other rows will
fail.
Enumerationr/w
Enumerated Values:
1unicastServer
2broadcastServer
3multicastServer
4manycastServer
5unicastPeer
6manycastPeer
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.2
cadNtpSourceBurstEnabled
If set to true(1), then burst mode is enabled. If
set to false(2), then burst mode is disabled.
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.3
cadNtpSourcePreferred
If set to true(1), then this NTP server or peer entry
is a preferred server or peer and will be considered
before other non-preferred servers or peers, even if those
other servers or peers have a better/lower Stratum va…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.4
cadNtpSourceAuthKeyId
The id-id of the MD5 authentication key-string as
stored in the cadNtpAuthKeyTable. A value of 0 for
this object denotes that no authentication is to
be used for communication.
SNMPv2-SMIUnsigned32r/w
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.5
cadNtpSourceMinPoll
If non-zero, this will override cadNtpMinPoll. See
the DESCRIPTION of cadNtpMinPoll for more details.
Integer32r/w
Constraints:
range: 0-0
range: 4-11
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.6
cadNtpSourceMaxPoll
If non-zero, this will override cadNtpMaxPoll. See
the DESCRIPTION of cadNtpMaxPoll for more details.
Integer32r/w
Constraints:
range: 0-0
range: 4-11
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.7
cadNtpSourceVersion
The version of NTP used when sending messages
to this server or peer. Setting this to 2, 3, or 4 will
override the cadNtpVersion default value. Setting
this object to 0 will cause the value in cadNtpVersion
to be used f…
Integer32r/w
Constraints:
range: 0-0
range: 2-4
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.8
cadNtpSourceTtl
The Time-To-Live (TTL) value used in the IP header
when trying to locate nearby members of its manycast
group. This object is only applicable for rows which
have a cadNtpSourceType value of either manycastServer(4)
or m…
Integer32r/w
Constraints:
range: 1-255
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.9
cadNtpSourceRowStatus
Control object for this row. The only values supported
by the C4 CMTS are active(1), createAndGo(4), and destroy(6).
Setting this object to createAndGo(4) will cause the row
to be created. Reading this object should alw…
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4998.1.1.5.2.3.10.10.1.10

cadNtpAuthKeyTable

table
.1.3.6.1.4.1.4998.1.1.5.2.3.30 · 1 row entry · 4 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadNtpAuthKeyTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-TIME-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-TIME-MIB::cadNtpAuthKeyTable' 
Table for provisioning NTP authentication keys
cadNtpAuthKeyEntry row .1.3.6.1.4.1.4998.1.1.5.2.3.30.1
Each entry represents an NTP authentication key.
Indexes
Column Syntax OID
cadNtpAuthKeyId
The ID of this NTP authentication key
Unsigned32
Constraints:
range: 1-65534
 .1.3.6.1.4.1.4998.1.1.5.2.3.30.1.1
cadNtpAuthKeyType
The type of key this row represents. Future versions
may support more authentication algorithms than MD5.
Enumerationr/w
Enumerated Values:
1md5
 .1.3.6.1.4.1.4998.1.1.5.2.3.30.1.2
cadNtpAuthKeyValue
The ASCII value of this key
OctetStringr/w
Constraints:
range: 1-16
 .1.3.6.1.4.1.4998.1.1.5.2.3.30.1.3
cadNtpAuthKeyRowStatus
Control object for this row
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4998.1.1.5.2.3.30.1.4