CADANT-LOADBALANCING-MIB Table View

Table-centric layout grouping table, row, and column objects.

Standard view Table view
Tables
5
Rows
5
Columns
25

cadLoadBalChgOverStatusTable

table
.1.3.6.1.4.1.4998.1.1.50.1.1 · 1 row entry · 1 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadLoadBalChgOverStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-LOADBALANCING-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-LOADBALANCING-MIB::cadLoadBalChgOverStatusTable' 
A table of CMTS operation entries to reports the status 
of cable modems instructed to move to a new downstream and/or 
upstream channel.
cadLoadBalChgOverStatusEntry row .1.3.6.1.4.1.4998.1.1.50.1.1.1
The status of the specified DCC/UCC operation
Indexes
Column Syntax OID
cadLoadBalChgOverStatusValue
The status of the specified DCC/UCC operation.
Enumeration
Enumerated Values:
1messageSent
2noOpNeeded
3modemDeparting
4waitToSendMessage
5cmOperationRejected
6cmtsOperationRejected
7timeOutT13
8timeOutT15
9rejectinit
10success
11dbcTimeout
 .1.3.6.1.4.1.4998.1.1.50.1.1.1.1

cadLoadBalCmtsCmStatusTable

table
.1.3.6.1.4.1.4998.1.1.50.1.2 · 1 row entry · 6 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadLoadBalCmtsCmStatusTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-LOADBALANCING-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-LOADBALANCING-MIB::cadLoadBalCmtsCmStatusTable' 
The list contains the load balancing attributes 
associated with the cable modem.
cadLoadBalCmtsCmStatusEntry row .1.3.6.1.4.1.4998.1.1.50.1.2.1
Additional objects for docsIfCmtsCmStatusTable entry
that relate to load balancing
Indexes
Column Syntax OID
cadLoadbal3CmtsCmParamsProvGrpId
This attribute indicates the provisioned Load Balancing
Group ID TLV the CM signaled to the CMTS during
registration, or zero if not provisioned in the CM.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.1
cadLoadbal3CmtsCmParamsCurrentGrpId
This attribute references the Load Balancing Group
Identifier (Id attribute from the GrpStatus object)
associated with the cable modem after the CMTS validates
the CM Load Balancing Group ID TLV, Service Type
ID TLV and…
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.2
cadLoadbal3CmtsCmParamsProvServiceTypeID
This attribute indicates the provisioned Service
Type ID TLV the CM signaled to the CMTS during registration,
or the zero-length string if not provisioned
in the CM.
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.3
cadLoadbal3CmtsCmParamsCurrentServiceTypeID
This attribute represents the Service Type ID the
CMTS picked from the Restricted Group of Restricted
CM list, or the Service Type Id TLV the CM signaled to the
CMTS during registration, or the zero-length string
if non…
OctetString
Constraints:
range: 0-16
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.4
cadLoadbal3CmtsCmParamsPolicyId
This attribute references the Load Balancing Policy
ID associated to the cable modem either from the configuration
file or from the General or Restricted
Load Balancing Groups CMTS configuration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.5
cadLoadbal3CmtsCmParamsPriority
This attribute references the Load Balancing Priority
associated to the cable modem either from the configuration
file or from the General or Restricted
Load Balancing Groups CMTS configuration.
SNMPv2-SMIUnsigned32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.2.1.6

cadLoadBalBasicRuleTable

table
.1.3.6.1.4.1.4998.1.1.50.1.4 · 1 row entry · 8 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadLoadBalBasicRuleTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-LOADBALANCING-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-LOADBALANCING-MIB::cadLoadBalBasicRuleTable' 
This table extends the docsLoadBalBasicRule table with
additional methods and thresolds.
cadLoadBalBasicRuleEntry row .1.3.6.1.4.1.4998.1.1.50.1.4.1
Load balancing count for Change Over within a load balancing group
Indexes
No indexes recorded
Column Syntax OID
cadLoadBalRuleMethod
cm-count uses dynamic load balancing of upstream receivers in the same
load balancing group to balance the number of CMs per upstream channel.
channel-utilization uses dynamic load balancing of the upstream receivers
in…
Enumerationr/w
Enumerated Values:
1cm-count
2channel-utilization
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.1
cadLoadBalRuleType
rule-static enables load balancing at modem initial maintenance
ranging time.
rule-non-bonded-dcc enables dynamic load balancing by moving non-
bonded CMs with DCC just after modem registration time and at
regular inter…
Bitsr/w
Enumerated Values:
0rule-static
1rule-non-bonded-dcc
2rule-bonded-us-dbc
3rule-bonded-ds-dbc
4rule-bonded-dcc
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.2
cadLoadBalRuleThreshold
This is the size of load difference between channels that is tolerated
before load balancing will be started.
Unsigned32r/w
Constraints:
range: 1-100
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.3
cadLoadBalRuleRegistrationSteeringD2
If this object is set to true the C4 is directed to move any D2.0 CMs registering on a TDMA channel
to an ATDMA channel in the load balance group.
This occurs immediately after the C4 receives a registration-acknowled…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.4
cadLoadBalRuleRegistrationSteeringD3
If this object is set to true the C4 is directed to move any D3.0 CMs registering on a TDMA channel
to an ATDMA channel in the load balance group.
This occurs immediately after the C4 receives a registration-acknowled…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.5
cadLoadBalRulePeriodicSteeringD2
If this object is set to true the C4 is directed to audit all TDMA channels
in an active load balance group and move D2.0 CMs to an ATDMA channel in the load balance group.
One CM is moved per TDMA channel per macdoma…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.6
cadLoadBalRulePeriodicSteeringD3
If this object is set to true the C4 is directed to audit all TDMA channels
in an active load balance group and move D3.0 CMs to an ATDMA channel in the load balance group.
One CM is moved per TDMA channel per macdoma…
SNMPv2-TCTruthValuer/w
Type Values:
1true
2false
Description:
Represents a boolean value.
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.7
cadLoadBalRuleChannelWeight
'equal' directs the load balancer to use DS and US channel load equally to determine
load balancing decisions.
'usOnly' directs the load balancer to only use US channel load to determine
load balancing decisions.
'd…
Enumerationr/w
Enumerated Values:
1equal
2usOnly
3dsOnly
4usPlus
5dsPlus
 .1.3.6.1.4.1.4998.1.1.50.1.4.1.8

cadLoadBalExcludedOUITable

table
.1.3.6.1.4.1.4998.1.1.50.1.5 · 1 row entry · 2 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadLoadBalExcludedOUITable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-LOADBALANCING-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-LOADBALANCING-MIB::cadLoadBalExcludedOUITable' 
This table contains a list of OUIs that should not be
moved through dynamic load balancing.
cadLoadBalExcludedOUIEntry row .1.3.6.1.4.1.4998.1.1.50.1.5.1
An OUI that describes a set of modems not to be moved by load balancing.
Indexes
Column Syntax OID
cadLoadBalExclOUIAddress
The OUI of the modem set to exclude from load balancing.
CADANT-TCOUIAddress
Type Constraints:
range: 3
 .1.3.6.1.4.1.4998.1.1.50.1.5.1.1
cadLoadBalExclRowStatus
The status object for adding and removing rows from this table.
The only valid values are createAndGo and destroy.
SNMPv2-TCRowStatusr/w
Type Values:
1active
2notInService
3notReady
4createAndGo
5createAndWait
6destroy
Description:
The RowStatus textual convention is used to manage the
creation and deletion of conceptual rows, and is used as the
value of the SYNTAX clause for the status column of a
conceptual row (as described in Section 7.7.1 of …
 .1.3.6.1.4.1.4998.1.1.50.1.5.1.2

cadLoadBalChannelTable

table
.1.3.6.1.4.1.4998.1.1.50.1.7 · 1 row entry · 8 columns
Open in standard view
Uses the arris variant from /opt/observium/mibs/arris.
Command help
Walk cadLoadBalChannelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'CADANT-LOADBALANCING-MIB' -M '/opt/observium/mibs/arris:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'CADANT-LOADBALANCING-MIB::cadLoadBalChannelTable' 
This table contains the count information of the load balancing 
group channels present in the C4.
cadLoadBalChannelEntry row .1.3.6.1.4.1.4998.1.1.50.1.7.1
Load balancing counts for a downstream or upstream channel.
Indexes
Column Syntax OID
cadLoadBalChannelUtilization
The downstream channel utilization snapshot captured by the
CAM during the last dynamic balancing interval. This
value is valid for both downstream and upstream channels.
Integer32
Constraints:
range: 0-100
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.1
cadLoadBalChannelCmCount
The count of cable modems associated with the channel. This
value is valid for both downstream and upstream channels.
SNMPv2-SMIInteger32
Type Constraints:
range: -2147483648..2147483647
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.2
cadLoadBalChannelDynamicTransfersIn
The number of successful modem transfers from other channels
initiated by the dynamic load balancer. This
value is valid for both downstream and upstream channels.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.3
cadLoadBalChannelDynamicTransfersOut
The number of successful modem transfers to other channels
initiated by the dynamic load balancer. This
value is valid for both downstream and upstream channels.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.4
cadLoadBalChannelStaticTransfersIn
The number of successful modem transfers from other channels
initiated by the static load balancer. This value is valid
for upstream channels only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.5
cadLoadBalChannelStaticTransfersOut
The number of successful modem transfers to other channels
initiated by the static load balancer. This value is valid
for upstream channels only.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.6
cadLoadBalChannelDbcTransfersIn
The number of times the particular channel has been moved into a
modem's channel-set via DBC load balancing. This value is valid
for both downstream and upstream channels.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.7
cadLoadBalChannelDbcTransfersOut
The number of times the particular channel has been moved out of a
modem's channel-set via DBC load balancing. This value is valid
for both downstream and upstream channels.
SNMPv2-SMICounter32
Type Constraints:
range: 0..4294967295
 .1.3.6.1.4.1.4998.1.1.50.1.7.1.8