CADANT-CMTS-IF3-MIB Table View

At MAC Domain creation time with one row per cadCmStatusEventTypeCode 
value for the new MAC Domain. These rows MUST be deleted by the CMTS 
when the MAC Domain is deleted.

cadCmStatusMdCfgEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.1.1

A conceptual row containing information about the
Cadant CM Status Mac domain configuration.

Indexes

CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex cadCmStatusEventTypeCode

Column	Syntax	OID
cadCmStatusEventTypeCode This field contains a unique code which describes the event condition. Refer to Table 6-56 in MULPI.	CmStatusEventTypeCode Type Values: 1 secondaryChlMddTimeout 2 qamFecLockFailure 3 seqOutOfRange 4 mddRecovery 5 qamFecLockRecovery 6 t4Timeout 7 t3RetriesExceeded 8 t3RangingRecovery 9 cmOnBatteryBackup 10 cmAcPowerRestored 16 ofdmProfileFailure 18 dpdMismatch 20 ncpProfileFailure 21 plcFecLockFailure 22 ncpProfileRecovery 23 plcFecLockRecovery 24 ofdmProfileRecovery	.1.3.6.1.4.1.4998.1.1.110.1.1.1.1.1
cadCmStatusEventDescription Textual description of event. This will default to a description that is generated by the CMTS but will be set to the Event Description which is sent from the CM, if applicable.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.4998.1.1.110.1.1.1.1.2
cadCmStatusEventEnabled This attribute represents the enable/disable for a particular event for which status may be reported via the CM-STATUS message.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.110.1.1.1.1.3
cadCmStatusMaxEventHoldoff The CM-STATUS reporting mechanism includes a random holdoff prior to transmission of status report messages. This attribute is the maximum value of that holdoff timer to be used by the CM when determining when to tra…	20 millisecond incrementsInteger32r/w Constraints: range: 1-65535	.1.3.6.1.4.1.4998.1.1.110.1.1.1.1.4
cadCmStatusMaxNumReports Maximum Number of Reports per event: 0: Unlimited number of reports 1-255: Maximum number of reports for an event type reporting transaction.	Integer32r/w Constraints: range: 0-255	.1.3.6.1.4.1.4998.1.1.110.1.1.1.1.5

A Table containing information about the 
Cadant CM control status override configuration.

cadCmtsCmCtrlStatusOverrideCfgEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.2.1

A conceptual row containing information about the
Cadant CM control status override configuration.

Indexes

cadCmtsCmCtrlStatusMacAddress cadCmtsCmCtrlStatusEventTypeCode

Column	Syntax	OID
cadCmtsCmCtrlStatusMacAddress The CM Mac Address.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.1
cadCmtsCmCtrlStatusEventTypeCode This field contains a unique code which describes the event condition. Refer to Table 6-56 in MULPI.	CmStatusEventTypeCode Type Values: 1 secondaryChlMddTimeout 2 qamFecLockFailure 3 seqOutOfRange 4 mddRecovery 5 qamFecLockRecovery 6 t4Timeout 7 t3RetriesExceeded 8 t3RangingRecovery 9 cmOnBatteryBackup 10 cmAcPowerRestored 16 ofdmProfileFailure 18 dpdMismatch 20 ncpProfileFailure 21 plcFecLockFailure 22 ncpProfileRecovery 23 plcFecLockRecovery 24 ofdmProfileRecovery	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.2
cadCmtsCmCtrlStatusOverrideEnabled This attribute can be used to override the CM's primary channel MDD with regard to enabling a particular event type.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.3
cadCmtsCmCtrlStatusOverrideDsChList List of DS channel IDs to which this override applies.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.4
cadCmtsCmCtrlStatusOverrideUsChList List of US channel IDs to which this override applies.	OctetStringr/w Constraints: range: 0-255	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.5
cadCmtsCmCtrlStatusRowStatus Row Status for this table	SNMPv2-TCRowStatusr/w Type Values: 1 active 2 notInService 3 notReady 4 createAndGo 5 createAndWait 6 destroy Description: The RowStatus textual convention is used to manage the creation and deletion of conceptual rows, and is used as the value of the SYNTAX clause for the status column of a conceptual row (as described in Section 7.7.1 of …	.1.3.6.1.4.1.4998.1.1.110.1.1.2.1.6

A Table containing information about the 
Cadant CM status counter.

cadCmStatusCountsEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.3.1

A conceptual row containing information about the
Cadant CM status counter.

Indexes

cadCmStatusCountsCmMacAddress cadCmStatusEventTypeCode

Column	Syntax	OID
cadCmStatusCountsCmMacAddress MAC Address of CM which reported this event.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.1
cadCmStatusCountsEventTypeCode This field contains a unique code which describes the event condition. Refer to Table 6-56 in MULPI.	CmStatusEventTypeCode Type Values: 1 secondaryChlMddTimeout 2 qamFecLockFailure 3 seqOutOfRange 4 mddRecovery 5 qamFecLockRecovery 6 t4Timeout 7 t3RetriesExceeded 8 t3RangingRecovery 9 cmOnBatteryBackup 10 cmAcPowerRestored 16 ofdmProfileFailure 18 dpdMismatch 20 ncpProfileFailure 21 plcFecLockFailure 22 ncpProfileRecovery 23 plcFecLockRecovery 24 ofdmProfileRecovery	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.2
cadCmStatusCountsEventDescription Textual description of event. This will default to a description that is generated by the CMTS but will be set to the Event Description which is sent from the CM, if applicable.	OctetString Constraints: range: 0-80	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.3
cadCmStatusCountsEventCount Count of the number of times that the cadCmStatusEventTypeCode has been reported for this CM.	SNMPv2-SMICounter64 Type Constraints: range: 0..18446744073709551615	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.4
cadCmStatusCountsReportedDsChIfIndex ifIndex corresponding to the reported DCID.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.5
cadCmStatusCountsReportedUsChIfIndex ifIndex corresponding to the reported UCID.	IF-MIBInterfaceIndexOrZero Type Constraints: range: 0..2147483647 Description: This textual convention is an extension of the InterfaceIndex convention. The latter defines a greater than zero value used to identify an interface or interface sub-layer in the managed system. This extension permits…	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.6
cadCmStatusCountsReportedDsid DSID as reported by CM.	DOCS-IF3-MIBDsid Type Constraints: range: 0..1048575	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.7
cadCmStatusCountsTimeStamp TimeStamp when this row was created.	SNMPv2-TCTimeStamp Based On: SNMPv2-SMITimeTicks Description: The value of the sysUpTime object at which a specific occurrence happened. The specific occurrence must be defined in the description of any object defined using this type. If sysUpTime is reset t…	.1.3.6.1.4.1.4998.1.1.110.1.1.3.1.8

A table that contains information on the 
CM repair parameters.

cadCmtsCmRepairParamEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.4.1

A conceptual row containing information about the
CM repair parameter.

Indexes

CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex

Column	Syntax	OID
cadCmtsCmRepairEnabled When true(1), the CMTS will periodically attempt to repair any unresolved topology and/or partial service condition for each CM which has been added to the CM problem list.	SNMPv2-TCTruthValuer/w Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.110.1.1.4.1.1
cadCmtsCmRepairWindowStartTime Time of day for beginning of CmRepair Window.	HhMmSsr/w Type Constraints: range: 3	.1.3.6.1.4.1.4998.1.1.110.1.1.4.1.2
cadCmtsCmRepairWindowEndTime Time of day for end of CmRepair Window.	HhMmSsr/w Type Constraints: range: 3	.1.3.6.1.4.1.4998.1.1.110.1.1.4.1.3
cadCmtsCmRepairInterval Period between repair attemts during repair window.	HhMmSsr/w Type Constraints: range: 3	.1.3.6.1.4.1.4998.1.1.110.1.1.4.1.4

A table that contains information on the 
CM impaired status.

cadCmtsCmRegImpairedStatusEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.5.1

A conceptual row containing information about the
CM impaired status.

Indexes

CADANT-CMTS-MAC-MIBcadIfCmtsCmStatusMacAddress cadCmtsCmRegImpairedIfIndex cadCmtsCmRegImpairedReason

Column	Syntax	OID
cadCmtsCmRegImpairedReason Reason why CM is considered to be impaired. Reason codes with lower integer values take precedence over reason codes with higher values if multiple reasons apply to the same CM. The unknownMdDsSgId reas…	Enumeration Enumerated Values: 100 qamFecLockFailure 130 plcFecLockFailure 150 ncpFecLockFailure 170 prof0FecLockFailure 200 unknownMdDsSgId 300 unknownMdUsSgId 400 badRcs 500 badTcs 600 t4Timeout 700 t3Timeout 900 usStationMaintFailure	.1.3.6.1.4.1.4998.1.1.110.1.1.5.1.1
cadCmtsCmRegImpairedFaultDetected Date and time when impairment of CM was first detected.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4998.1.1.110.1.1.5.1.2
cadCmtsCmRegImpairedLastRepairAttempt Date and time when corrective action was last attempted. If no action has not yet been attempted, then this time should be the same as cadCmtsCmRegImpairedFaultDetected.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4998.1.1.110.1.1.5.1.3
cadCmtsCmRegImpairedLastRepairAction Type of corrective action last attempted. If no action has yet been attempted then the value should be noAction.	Enumeration Enumerated Values: 0 noAction 1 cmReset 2 dbcMessage 3 dccMessage	.1.3.6.1.4.1.4998.1.1.110.1.1.5.1.4
cadCmtsCmRegImpairedIfIndex This object indicates either a downstream or upstream channel is impaired.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.110.1.1.5.1.5

This object defines status information of the CM
currently in use Upstream Logical Channels, as reported
by the CMTS.

cadIf3CmtsCmUsStatusEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.6.1

The conceptual row of cadIf3CmtsCmUsStatusTable.

Indexes

CADANT-CMTS-MAC-MIBcadIfCmtsCmStatusMacAddress cadIf3CmtsCmUsStatusChIfIndex

Column	Syntax	OID
cadIf3CmtsCmUsStatusChIfIndex This attribute is a key that represents the ifIndex of the upstream interface.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.110.1.1.6.1.1
cadIf3CmtsCmUsStatusModulationType This attribute represents the modulation type currently used by this upstream channel.	DOCS-IF-MIBDocsisUpstreamType Type Values: 0 unknown 1 tdma 2 atdma 3 scdma 4 tdmaAndAtdma	.1.3.6.1.4.1.4998.1.1.110.1.1.6.1.2
cadIf3CmtsCmUsStatusIsMuted This attribute has a value 'true' to indicate that the CM's upstream channel has been muted via CM-CTRL-REQ/CM-CTRL-RSP message exchange.	SNMPv2-TCTruthValue Type Values: 1 true 2 false Description: Represents a boolean value.	.1.3.6.1.4.1.4998.1.1.110.1.1.6.1.11
cadIf3CmtsCmUsStatusRangingStatus This attribute denotes the ranging state of the CM.	DOCS-IF3-MIBRangingState Type Values: 1 other 2 aborted 3 retriesExceeded 4 success 5 continue 6 timeoutT4	.1.3.6.1.4.1.4998.1.1.110.1.1.6.1.12

The RCC Status object provides a read-only view of
the statically-configured (from the RccCfg object)
and dynamically-created RCCs.
The CMTS creates an RCC Status instance for each unique
MAC Domain Cable Modem Service Group (MD-CM-SG) to
which it signals an RCC to the CM.

cadRccStatusEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.7.1

The conceptual row of cadRccStatusTable.
The ifIndex key corresponds to the MAC Domain interface
where the RCC is configured.

Indexes

CADANT-CMTS-LAYER2CMTS-MIBcadIfMacDomainIfIndex cadRccStatusRcpId cadRccStatusId

Column	Syntax	OID
cadRccStatusRcpId This key represents the RCP-ID to which this instance applies.	DOCS-IF3-MIBRcpId Type Constraints: range: 5	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.1
cadRccStatusId This key represents an RCC combination for a particular RcpId either from an RCC configuration object or a CMTS-determined RCC and is unique per combination of MAC Domain IfIndex and RcpId.	Unsigned32 Constraints: range: 1-4294967295	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.2
cadRccStatusRccCfgId This attribute identifies an RCC-Configured combination from which this instance was defined. If nonzero, it corresponds to the RccCfg instance from which the RCC was created. Zero means that the RCC was dynamically cr…	Unsigned32 Constraints: range: 0-65535	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.3
cadRccStatusValidityCode This attribute indicates whether the RCC instance of this object is valid or not. An RCC Status instance from a configured or a dynamic RCC could become invalid, for example, due changes in the topology.	Enumeration Enumerated Values: 1 other 2 valid 3 invalid 4 wrongPrimaryDs 5 missingPrimaryDs 6 multiplePrimaryDs 7 duplicateDs 8 wrongFrequencyRange 9 wrongConnectivity	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.4
cadRccStatusValidityCodeText This attribute contains the CMTS vendor-specific log information from the Receive Channel Configuration Status encoding.	SNMP-FRAMEWORK-MIBSnmpAdminString Type Constraints: range: 0..255	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.5
cadRccStatusDsChSetId This object contains the ID for the downstream channel set used by this RCC. It is only unique in association with a specific MAC domain.	DOCS-IF3-MIBChSetId	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.6
cadRccStatusChannelCount This object provides the number of downstream channels provided by a modem using this RCC.	SNMPv2-SMIUnsigned32 Type Constraints: range: 0..4294967295	.1.3.6.1.4.1.4998.1.1.110.1.1.7.1.7

This object defines a set of upstream channels. These
channel sets may be associated with TCSID.

cadIf3UsChSetEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.8.1

The conceptual row of cadIf3UsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the upstream channel set is defined.

Indexes

IF-MIBifIndex DOCS-IF3-MIBdocsIf3UsChSetId cadIf3UsChIfIndex

Column	Syntax	OID
cadIf3UsChIfIndex This object is associated with an upstream channel ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.110.1.1.8.1.1

This object defines a set of downstream channels. These
channel sets may be associated with RCSID.

cadIf3DsChSetEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.9.1

The conceptual row of cadIf3DsChSetTable.
The ifIndex key corresponds to the MAC Domain interface
where the downstream channel set is defined.

Indexes

IF-MIBifIndex DOCS-IF3-MIBdocsIf3DsChSetId cadIf3DsChIfIndex

Column	Syntax	OID
cadIf3DsChIfIndex This object is associated with an downstream channel ifIndex.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.110.1.1.9.1.1

This table contains counts of the modems using a particular upstream
or downstream channel set.  It is used to construct

cadIf3CsSummaryEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.10.1

The conceptual row of the cadIf3CsSummary table that contains the
the count of modems using this channel set.

Indexes

IF-MIBifIndex cadIf3CsDir cadIf3CsId

Column	Syntax	OID
cadIf3CsDirdeprecated The direction of the channel set associated with this modem count.	DOCS-IF3-MIBIfDirection Type Values: 1 downstream 2 upstream	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.1
cadIf3CsIddeprecated The channel set associated with this modem count.	DOCS-IF3-MIBChSetId	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.2
cadIf3CsNumOtherdeprecated The number of modems on this channel set in state other(1)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.3
cadIf3CsNumInitRangingdeprecated The number of modems on this channel set in state initialRanging(2)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.4
cadIf3CsNumRangingCompletedeprecated The number of modems on this channel set in state rangingAutoAdjComplete(4)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.5
cadIf3CsNumStartEaedeprecated The number of modems on this channel set in state startEae(10)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.6
cadIf3CsNumStartDhcpv4deprecated The number of modems on this channel set in state startDhcpv4(11)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.7
cadIf3CsNumStartDhcpv6deprecated The number of modems on this channel set in state startDhcpv6(12)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.8
cadIf3CsNumDhcpv4Completedeprecated The number of modems on this channel set in state dhcpv4Complete(5)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.9
cadIf3CsNumDhcpv6Completedeprecated The number of modems on this channel set in state dhcpv6Complete(13)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.10
cadIf3CsNumStartCfgFileDownloaddeprecated The number of modems on this channel set in state startConfigFileDownload(14)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.11
cadIf3CsNumCfgFileDownloadCompletedeprecated The number of modems on this channel set in state configFileDownloadComplete(15)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.12
cadIf3CsNumStartRegistrationdeprecated The number of modems on this channel set in state startRegistration(16)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.13
cadIf3CsNumRegistrationCompletedeprecated The number of modems on this channel set in state registrationComplete(6)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.14
cadIf3CsNumOperationaldeprecated The number of modems on this channel set in state operational(8)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.15
cadIf3CsNumBpiInitdeprecated The number of modems on this channel set in state bpiInit(9)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.16
cadIf3CsNumForwardingDisableddeprecated The number of modems on this channel set in state forwardingDisabled(17)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.17
cadIf3CsNumRfMuteAlldeprecated The number of modems on this channel set in state rfMuteAll(18)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.18
cadIf3CsNumTotaldeprecated The total count of cable modems on this channel set	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.19
cadIf3CsNumRangingAborteddeprecated The number of modems on this channel set in state rangingAborted(3)	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.20
cadIf3CsNumRangFlapsdeprecated The number of times a CM on this channel set has reset in Ranging states.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.21
cadIf3CsNumProvFlapsdeprecated The number of times a CM on this channel set has reset in Provisioning states.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.22
cadIf3CsNumRegFlapsdeprecated The number of times a CM on this channel set has reset in Registered state.	SNMPv2-SMIInteger32 Type Constraints: range: -2147483648..2147483647	.1.3.6.1.4.1.4998.1.1.110.1.1.10.1.23

A table that contains information on the 
CM impaired status (partial channel condition).

cadIfCmtsCmFailedProfStatusEntry row .1.3.6.1.4.1.4998.1.1.110.1.1.12.1

A conceptual row containing information about the
CM impaired OFDM profile status.

Indexes

cadIfCmtsCmFailedProfMacAddress cadIfCmtsCmFailedProfIfIndex cadIfCmtsCmFailedProfId cadIfCmtsCmFailedProfReason

Column	Syntax	OID
cadIfCmtsCmFailedProfMacAddress The MAC address of the modem experiencing the failure.	SNMPv2-TCMacAddress Type Constraints: range: 6 Description: Represents an 802 MAC address represented in the `canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even though 802.5 (in contrast to other 802.x protocols) requires M…	.1.3.6.1.4.1.4998.1.1.110.1.1.12.1.1
cadIfCmtsCmFailedProfIfIndex This is the ifIndex of the channel associated with the Failed profile.	IF-MIBInterfaceIndex Type Constraints: range: 1..2147483647 Description: A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must …	.1.3.6.1.4.1.4998.1.1.110.1.1.12.1.2
cadIfCmtsCmFailedProfId The profile number of this profile plus one. Profile IDs zero and 255 result in partial service, not a partial channel condition, so they are not in this table.	Integer32 Constraints: range: 2-16	.1.3.6.1.4.1.4998.1.1.110.1.1.12.1.3
cadIfCmtsCmFailedProfReason Reason why a profile is considered to be impaired. The lostFecLock reason is used when the CM sends a DS OFDM profile failure CM-STATUS message for an OFDM channel and profile. This is sent when the CM d…	Enumeration Enumerated Values: 300 lostFecLock	.1.3.6.1.4.1.4998.1.1.110.1.1.12.1.4
cadIfCmtsCmFailedProfFaultDetected Date and time when impairment of CM was first detected.	SNMPv2-TCDateAndTime Type Constraints: range: 8 range: 11 Description: A date-time specification. field octets contents range ----- ------ -------- ----- 1 1-2 year* 0..65536 2 3 month …	.1.3.6.1.4.1.4998.1.1.110.1.1.12.1.5