BtechProbe1-MIB Table View

Table-centric layout grouping table, row, and column objects.

Tables
8
Rows
8
Columns
42

channelTable

table mandatory
.1.3.6.1.4.1.24562.510 · 1 row entry · 8 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk channelTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::channelTable'
This table holds channel properties for all channels
channelEntry row .1.3.6.1.4.1.24562.510.1
An entry in the channelTable.
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.510.1.1
channelNamemandatory
Name of multicast.
RFC1213-MIBDisplayString .1.3.6.1.4.1.24562.510.1.2
channelIpamandatory
Multicast or unicast address.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.24562.510.1.3
channelPortmandatory
UDP port.
BtechTypes-MIBUdpPort
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.24562.510.1.4
Protocol mapping i.e. how payload is embedded in UDP packets.
RFC1213-MIBDisplayString .1.3.6.1.4.1.24562.510.1.5
Multicast or unicast source address used when joining.
RFC1155-SMIIpAddress
Type Constraints:
range: 4
.1.3.6.1.4.1.24562.510.1.6
UDP source port as detected in signal.
BtechTypes-MIBUdpPort
Type Constraints:
range: 0..65535
.1.3.6.1.4.1.24562.510.1.7
Multicast or unicast source address as detected in signal. Name if defined.
RFC1213-MIBDisplayString .1.3.6.1.4.1.24562.510.1.8

iaterrTable

table mandatory
.1.3.6.1.4.1.24562.519 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk iaterrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::iaterrTable'
This table holds iaterr seconds for all channels
iaterrEntry row .1.3.6.1.4.1.24562.519.1
An entry in the iaterrTable.
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.519.1.1
iaterr24hmandatory
Error-seconds last 24 hours for parameter iaterr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.519.1.3
iaterr20mmandatory
Error-seconds last 20 minutes for parameter iaterr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.519.1.5
iaterr1mmandatory
Error-seconds last minute for parameter iaterr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.519.1.7

mlrerrTable

table mandatory
.1.3.6.1.4.1.24562.520 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk mlrerrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::mlrerrTable'
This table holds mlrerr seconds for all channels
mlrerrEntry row .1.3.6.1.4.1.24562.520.1
An entry in the mlrerrTable.
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.520.1.1
mlrerr24hmandatory
Error-seconds last 24 hours for parameter mlrerr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.520.1.3
mlrerr20mmandatory
Error-seconds last 20 minutes for parameter mlrerr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.520.1.5
mlrerr1mmandatory
Error-seconds last minute for parameter mlrerr.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.520.1.7

rtpdropsTable

table mandatory
.1.3.6.1.4.1.24562.530 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk rtpdropsTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::rtpdropsTable'
This table holds rtpdrops seconds for all channels
rtpdropsEntry row .1.3.6.1.4.1.24562.530.1
An entry in the rtpdropsTable.
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.530.1.1
rtpdrops24hmandatory
Error-seconds last 24 hours for parameter rtpdrops.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.530.1.3
rtpdrops20mmandatory
Error-seconds last 20 minutes for parameter rtpdrops.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.530.1.5
rtpdrops1mmandatory
Error-seconds last minute for parameter rtpdrops.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.530.1.7

bitrovflTable

table mandatory
.1.3.6.1.4.1.24562.540 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk bitrovflTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::bitrovflTable'
This table holds bitrovfl seconds for all channels
bitrovflEntry row .1.3.6.1.4.1.24562.540.1
An entry in the bitrovflTable.
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.540.1.1
bitrovfl24hmandatory
Error-seconds last 24 hours for parameter bitrovfl.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.540.1.3
bitrovfl20mmandatory
Error-seconds last 20 minutes for parameter bitrovfl.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.540.1.5
bitrovfl1mmandatory
Error-seconds last minute for parameter bitrovfl.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.540.1.7

nosigTable

table mandatory
.1.3.6.1.4.1.24562.550 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk nosigTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::nosigTable'
This table holds nosig seconds for all channels
nosigEntry row .1.3.6.1.4.1.24562.550.1
An entry in the nosigTable.
Indexes
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.550.1.1
nosig24hmandatory
Error-seconds last 24 hours for parameter nosig.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.550.1.3
nosig20mmandatory
Error-seconds last 20 minutes for parameter nosig.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.550.1.5
nosig1mmandatory
Error-seconds last minute for parameter nosig.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.550.1.7

mdiTable

table mandatory
.1.3.6.1.4.1.24562.560 · 1 row entry · 10 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk mdiTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::mdiTable'
This table holds peak IAT and sum MRL for last minute all channels
mdiEntry row .1.3.6.1.4.1.24562.560.1
An entry in the mdiTable.
Indexes
Column Syntax OID
mdiTableIndexmandatory
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.560.1.1
iatPeak24hmandatory
Peak IAT for last 24h. Updated when secondsSince1mUpdate is 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.4
mlrSum24hmandatory
Sum MLR for the last 24h.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.5
iatPeak20mmandatory
Peak IAT for last 20 minutes. Updated when secondsSince1mUpdate is 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.8
mlrSum20mmandatory
Sum MLR for the last 20 minutes. Updated when secondsSince1mUpdate is 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.9
iatPeak1mmandatory
Peak IAT for last minute. Updated when secondsSince1mUpdate is 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.12
mlrSum1mmandatory
Sum MLR for the last minute. Updated when secondsSince1mUpdate is 0.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.13
mlrSumUsrmandatory
Sum MLR since last clearCounters. Updated immediately.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.14
iatPeakUsrmandatory
Peak IAT since last clearCounters. Updated immediately.
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.15
clearCountersmandatory
Write:clear counters. Read:seconds since cleared. Updated immediately.
Integer32r/w
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.560.1.16

bitrTable

table mandatory
.1.3.6.1.4.1.24562.570 · 1 row entry · 4 columns
Uses the btech variant from /opt/observium/mibs/btech.
Command help
Walk bitrTable
/usr/bin/snmpbulkwalk -v2c -c '<community>' -Pud -Ir -OQUs -m 'BtechProbe1-MIB' -M '/opt/observium/mibs/btech:/opt/observium/mibs/rfc:/opt/observium/mibs/net-snmp' 'udp:<hostname>:161' 'BtechProbe1-MIB::bitrTable'
This table holds peak bitrate for last minut all channels (without NULL PIDs)
bitrEntry row .1.3.6.1.4.1.24562.570.1
An entry in the bitrTable.
Indexes
Column Syntax OID
Index corresponding to a specific channel.
Integer32
Constraints:
range: 1-180
.1.3.6.1.4.1.24562.570.1.1
bitrPeak24hmandatory
Peak bitrate for last 24 hours (without NULL PIDs).
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.570.1.3
bitrPeak20mmandatory
Peak bitrate for last 20 minutes (without NULL PIDs).
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.570.1.5
bitrPeak1mmandatory
Peak bitrate for last minute (without NULL PIDs).
Integer32
Type Constraints:
range: -2147483648..2147483647
.1.3.6.1.4.1.24562.570.1.7